Re: [PATCH v2 34/43] drm/sun4i: Add buffer stride and offset configuration for tiling mode
From: Paul Kocialkowski
Date: Tue Dec 04 2018 - 08:31:14 EST
Hi,
On Tue, 2018-11-27 at 10:24 +0100, Maxime Ripard wrote:
> On Fri, Nov 23, 2018 at 10:25:06AM +0100, Paul Kocialkowski wrote:
> > This introduces stride and offset configuration for the VPU tiling mode.
> > Stride is calculated differently than it is for linear formats and an
> > offset is calculated, for which new register definitions are introduced.
> >
> > Signed-off-by: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxx>
> > ---
> > drivers/gpu/drm/sun4i/sun4i_frontend.c | 54 ++++++++++++++++++++++++--
> > drivers/gpu/drm/sun4i/sun4i_frontend.h | 7 ++++
> > 2 files changed, 58 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/sun4i/sun4i_frontend.c b/drivers/gpu/drm/sun4i/sun4i_frontend.c
> > index efa1ff0802bd..3f76a5572449 100644
> > --- a/drivers/gpu/drm/sun4i/sun4i_frontend.c
> > +++ b/drivers/gpu/drm/sun4i/sun4i_frontend.c
> > @@ -125,21 +125,69 @@ void sun4i_frontend_update_buffer(struct sun4i_frontend *frontend,
> > {
> > struct drm_plane_state *state = plane->state;
> > struct drm_framebuffer *fb = state->fb;
> > + unsigned int strides[3] = {};
> > +
> > dma_addr_t paddr;
> > bool swap;
> >
> > + if (fb->modifier == DRM_FORMAT_MOD_ALLWINNER_TILED) {
> > + unsigned int width = state->src_w >> 16;
> > + unsigned int offset;
> > +
> > + /*
> > + * In MB32 tiled mode, the stride is defined as the distance
> > + * between the start of the end line of the current tile and
> > + * the start of the first line in the next vertical tile.
> > + *
> > + * Tiles are represented in row-major order, thus the end line
> > + * of current tile starts at: 31 * 32 (31 lines of 32 cols),
> > + * the next vertical tile starts at: 32-bit-aligned-width * 32
> > + * and the distance is: 32 * (32-bit-aligned-width - 31).
> > + */
> > +
> > + strides[0] = (fb->pitches[0] - 31) * 32;
> > +
> > + /* Offset of the bottom-right point in the end tile. */
> > + offset = (width + (32 - 1)) & (32 - 1);
>
> Those computations are a bit obscure. I guess adding a bunch of
> defines, and using the round_up / _down and ALIGN macros would help
Fair enough, I will add a more explicit comment and a macro in v3.
> > + regmap_write(frontend->regs, SUN4I_FRONTEND_TB_OFF0_REG,
> > + SUN4I_FRONTEND_TB_OFF_X1(offset));
> > +
> > + if (fb->format->num_planes > 1) {
> > + strides[1] = (fb->pitches[1] - 31) * 32;
> > +
> > + regmap_write(frontend->regs, SUN4I_FRONTEND_TB_OFF1_REG,
> > + SUN4I_FRONTEND_TB_OFF_X1(offset));
> > + }
> > +
> > + if (fb->format->num_planes > 2) {
> > + strides[2] = (fb->pitches[2] - 31) * 32;
> > +
> > + regmap_write(frontend->regs, SUN4I_FRONTEND_TB_OFF2_REG,
> > + SUN4I_FRONTEND_TB_OFF_X1(offset));
> > + }
>
> I guess we could fall in a situation where this is not cleared when
> moving from a format with 3 planes to one with 2 for example. Would
> that break anything?
I have tested this case and nothing breaks so we're good!
Cheers,
Paul
--
Paul Kocialkowski, Bootlin (formerly Free Electrons)
Embedded Linux and kernel engineering
https://bootlin.com