[PATCH v4 2/8] drm/msm/dsi: 28nm 8960 PHY: Get ref clock from the DT

[Matthias Kaehlcke]

Get the ref clock of the PHY from the device tree instead of
hardcoding its name and rate.

Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
---
Changes in v4:
- always use parent rate in dsi_pll_28nm_clk_set_rate()
- pass name of VCO ref clock to pll_28nm_register() instead of
  storing it in a struct field
- updated commit message

Changes in v3:
- use default name and rate if the ref clock is not specified
  in the DT
- store vco_ref_clk_name instead of vco_ref_clk
- fixed check for EPROBE_DEFER
- renamed VCO_REF_CLK_RATE to VCO_REF_CLK_DEFAULT_RATE

Changes in v2:
- patch added to the series
---
 .../gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c   | 24 +++++++++++++++----
 1 file changed, 19 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c
index 49008451085b8..76e5188169b91 100644
--- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c
+++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c
@@ -47,7 +47,6 @@
 
 #define NUM_PROVIDED_CLKS	2
 
-#define VCO_REF_CLK_RATE	27000000
 #define VCO_MIN_RATE		600000000
 #define VCO_MAX_RATE		1200000000
 
@@ -125,7 +124,7 @@ static int dsi_pll_28nm_clk_set_rate(struct clk_hw *hw, unsigned long rate,
 	DBG("rate=%lu, parent's=%lu", rate, parent_rate);
 
 	temp = rate / 10;
-	val = VCO_REF_CLK_RATE / 10;
+	val = parent_rate / 10;
 	fb_divider = (temp * VCO_PREF_DIV_RATIO) / val;
 	fb_divider = fb_divider / 2 - 1;
 	pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_1,
@@ -406,11 +405,12 @@ static void dsi_pll_28nm_destroy(struct msm_dsi_pll *pll)
 					pll_28nm->clks, pll_28nm->num_clks);
 }
 
-static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm)
+static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm,
+			     const char *ref_clk_name)
 {
 	char *clk_name, *parent_name, *vco_name;
 	struct clk_init_data vco_init = {
-		.parent_names = (const char *[]){ "pxo" },
+		.parent_names = &ref_clk_name,
 		.num_parents = 1,
 		.flags = CLK_IGNORE_UNUSED,
 		.ops = &clk_ops_dsi_pll_28nm_vco,
@@ -494,6 +494,8 @@ struct msm_dsi_pll *msm_dsi_pll_28nm_8960_init(struct platform_device *pdev,
 {
 	struct dsi_pll_28nm *pll_28nm;
 	struct msm_dsi_pll *pll;
+	struct clk *vco_ref_clk;
+	const char *vco_ref_clk_name;
 	int ret;
 
 	if (!pdev)
@@ -506,6 +508,18 @@ struct msm_dsi_pll *msm_dsi_pll_28nm_8960_init(struct platform_device *pdev,
 	pll_28nm->pdev = pdev;
 	pll_28nm->id = id + 1;
 
+	vco_ref_clk = devm_clk_get(&pdev->dev, "ref");
+	if (!IS_ERR(vco_ref_clk)) {
+		vco_ref_clk_name = __clk_get_name(vco_ref_clk);
+	} else {
+		ret = PTR_ERR(vco_ref_clk);
+		if (ret == -EPROBE_DEFER)
+			return ERR_PTR(ret);
+
+		dev_warn(&pdev->dev, "'ref' clock is not specified, using default name\n");
+		vco_ref_clk_name = "pxo";
+	}
+
 	pll_28nm->mmio = msm_ioremap(pdev, "dsi_pll", "DSI_PLL");
 	if (IS_ERR_OR_NULL(pll_28nm->mmio)) {
 		dev_err(&pdev->dev, "%s: failed to map pll base\n", __func__);
@@ -524,7 +538,7 @@ struct msm_dsi_pll *msm_dsi_pll_28nm_8960_init(struct platform_device *pdev,
 	pll->en_seq_cnt = 1;
 	pll->enable_seqs[0] = dsi_pll_28nm_enable_seq;
 
-	ret = pll_28nm_register(pll_28nm);
+	ret = pll_28nm_register(pll_28nm, vco_ref_clk_name);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to register PLL: %d\n", ret);
 		return ERR_PTR(ret);
-- 
2.20.0.rc1.387.gf8505762e3-goog