Re: [PATCH v5 0/3] Stingray thermal driver support

[Srinath Mannam]

Hi,

Could you please provide your feedback to this patch series?

Regards,
Srinath.
On Thu, Nov 8, 2018 at 3:45 AM Florian Fainelli <f.fainelli@xxxxxxxxx> wrote:
>
>
>
> On 10/16/2018 8:11 AM, Srinath Mannam wrote:
> > These patches adds the stingray thermal driver and its
> > corresponding DT nodes with documentation.
>
> Can we get feedback from the thermal maintains whether this is
> acceptable or not?
>
> >
> > Changes from v4
> >   - Addressed Rob Herring comments on DT parameters and
> >     thermal driver architecture.
> >   - Removed brcm,max-crit-temp DT parameter
> >   - Changed driver to thermal sensor registration model.
> >   - Added trip DT properties.
> >
> > Changes from v3
> >   - Addressed Daniel lezcano comments.
> >   - Elaborated commit description of thermal driver patch.
> >   - Added brcm,max-crit-temp DT parameter.
> >
> > Changes from v2:
> >   - All stingray TMON DT nodes are combine together into single.
> >     Temperature registers are combined into one mem resource.
> >     brcm,tmon-mask parameter has available TMONs mask value.
> >   - All available TMONs are initialized together in single
> >     instance of driver probe call.
> >
> > Changes from v1:
> >   - Fixed auto build sparce warning.
> >
> > Pramod Kumar (3):
> >   dt-bindings: thermal: Add binding document for SR thermal
> >   thermal: broadcom: Add Stingray thermal driver
> >   arm64: dts: stingray: Add Stingray Thermal DT support.
> >
> >  .../bindings/thermal/brcm,sr-thermal.txt           | 105 ++++++++++++++++
> >  .../arm64/boot/dts/broadcom/stingray/stingray.dtsi |  89 +++++++++++++
> >  drivers/thermal/Kconfig                            |   3 +-
> >  drivers/thermal/broadcom/Kconfig                   |   9 ++
> >  drivers/thermal/broadcom/Makefile                  |   1 +
> >  drivers/thermal/broadcom/sr-thermal.c              | 138 +++++++++++++++++++++
> >  6 files changed, 344 insertions(+), 1 deletion(-)
> >  create mode 100644 Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt
> >  create mode 100644 drivers/thermal/broadcom/sr-thermal.c
> >
>
> --
> Florian