Re: [PATCH] ARM: dts: exynos: Add proper regulator states for suspend-to-mem for odroid-u3

From: Anand Moon
Date: Wed Dec 05 2018 - 22:12:15 EST

Next message: Martin K. Petersen: "Re: [PATCH 2/2] loop: Better discard support for block devices"
Previous message: Christian Brauner: "Re: [PATCH v3] signal: add procfd_send_signal() syscall"
In reply to: Krzysztof Kozlowski: "Re: [PATCH] ARM: dts: exynos: Add proper regulator states for suspend-to-mem for odroid-u3"
Next in thread: Anand Moon: "Re: [PATCH] ARM: dts: exynos: Add proper regulator states for suspend-to-mem for odroid-u3"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi Krzysztof,

On Wed, 5 Dec 2018 at 21:49, Krzysztof Kozlowski <krzk@xxxxxxxxxx> wrote:
>
> On Wed, 5 Dec 2018 at 17:11, Anand Moon <linux.amoon@xxxxxxxxx> wrote:
> >
> > Hi Krzysztof,
> >
> > Thanks for your review.
> > .
> > On Wed, 5 Dec 2018 at 19:36, Krzysztof Kozlowski <krzk@xxxxxxxxxx> wrote:
> > >
> > > On Tue, 4 Dec 2018 at 20:40, Anand Moon <linux.amoon@xxxxxxxxx> wrote:
> > > >
> > > > Add suspend-to-mem node to regulator core to be enabled or disabled
> > > > during system suspend and also support changing the regulator operating
> > > > mode during runtime and when the system enter sleep mode.
> > > >
> > > > Signed-off-by: Anand Moon <linux.amoon@xxxxxxxxx>
> > > > ---
> > > > Tested on Odroid U3+
> > > > ---
> > > > .../boot/dts/exynos4412-odroid-common.dtsi | 72 +++++++++++++++++++
> > > > 1 file changed, 72 insertions(+)
> > > >
> > > > diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
> > > > index 2caa3132f34e..837713a2ec3b 100644
> > > > --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
> > > > +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
> > > > @@ -285,6 +285,9 @@
> > > > regulator-min-microvolt = <1800000>;
> > > > regulator-max-microvolt = <1800000>;
> > > > regulator-always-on;
> > > > + regulator-state-mem {
> > > > + regulator-on-in-suspend;
> > > > + };
> > >
> > > Driver does not support suspend_enable so this will be noop. We could
> > > add this for DT-correctness (and full description of HW) but then I
> > > need explanation why this regulator has to stay on during suspend.
> > >
> >
> > Well I tried to study the suspend/resume feature from
> > *arch/arm/boot/dts/exynos4412-midas.dtsi*
> > and them I tried to apply the same with this on Odroid-U3 boards and
> > test these changes.
>
> Midas DTSI clearly has bugs then.
>
> >
> > > > };
> > > >
> > > > ldo3_reg: LDO3 {
> > > > @@ -292,6 +295,9 @@
> > > > regulator-min-microvolt = <1800000>;
> > > > regulator-max-microvolt = <1800000>;
> > > > regulator-always-on;
> > > > + regulator-state-mem {
> > > > + regulator-off-in-suspend;
> > > > + };
> > >
> > > The same but with suspend_disable.
> > >
> > > I am not saying that these are wrong but I would be happy to see
> > > explanations why you chosen these particular properties.
> > >
> >
> > Well I was not aware on the regulator-always-on cannot be set to off
> > in suspend mode.
> > Will drop this in the future patch where regulator-always-on; is set.
> >
> > > > };
> > > >
> > > > ldo4_reg: LDO4 {
> > > > @@ -299,6 +305,9 @@
> > > > regulator-min-microvolt = <2800000>;
> > > > regulator-max-microvolt = <2800000>;
> > > > regulator-boot-on;
> > > > + regulator-state-mem {
> > > > + regulator-on-in-suspend;
> > > > + };
> > > > };
> > > >
> > > > ldo5_reg: LDO5 {
> > > > @@ -307,6 +316,9 @@
> > > > regulator-max-microvolt = <1800000>;
> > > > regulator-always-on;
> > > > regulator-boot-on;
> > > > + regulator-state-mem {
> > > > + regulator-on-in-suspend;
> > > > + };
> > > > };
> > > >
> > > > ldo6_reg: LDO6 {
> > > > @@ -314,6 +326,9 @@
> > > > regulator-min-microvolt = <1000000>;
> > > > regulator-max-microvolt = <1000000>;
> > > > regulator-always-on;
> > > > + regulator-state-mem {
> > > > + regulator-on-in-suspend;
> > > > + };
> > > > };
> > > >
> > > > ldo7_reg: LDO7 {
> > > > @@ -321,18 +336,27 @@
> > > > regulator-min-microvolt = <1000000>;
> > > > regulator-max-microvolt = <1000000>;
> > > > regulator-always-on;
> > > > + regulator-state-mem {
> > > > + regulator-on-in-suspend;
> > > > + };
> > > > };
> > > >
> > > > ldo8_reg: LDO8 {
> > > > regulator-name = "VDD10_HDMI_1.0V";
> > > > regulator-min-microvolt = <1000000>;
> > > > regulator-max-microvolt = <1000000>;
> > > > + regulator-state-mem {
> > > > + regulator-off-in-suspend;
> > > > + };
> > > > };
> > > >
> > > > ldo10_reg: LDO10 {
> > > > regulator-name = "VDDQ_MIPIHSI_1.8V";
> > > > regulator-min-microvolt = <1800000>;
> > > > regulator-max-microvolt = <1800000>;
> > > > + regulator-state-mem {
> > > > + regulator-off-in-suspend;
> > > > + };
> > > > };
> > > >
> > > > ldo11_reg: LDO11 {
> > > > @@ -340,6 +364,9 @@
> > > > regulator-min-microvolt = <1800000>;
> > > > regulator-max-microvolt = <1800000>;
> > > > regulator-always-on;
> > > > + regulator-state-mem {
> > > > + regulator-off-in-suspend;
> > > > + };
> > > > };
> > > >
> > > > ldo12_reg: LDO12 {
> > > > @@ -348,6 +375,9 @@
> > > > regulator-max-microvolt = <3300000>;
> > > > regulator-always-on;
> > > > regulator-boot-on;
> > > > + regulator-state-mem {
> > > > + regulator-off-in-suspend;
> > > > + };
> > > > };
> > > >
> > > > ldo13_reg: LDO13 {
> > > > @@ -356,6 +386,9 @@
> > > > regulator-max-microvolt = <1800000>;
> > > > regulator-always-on;
> > > > regulator-boot-on;
> > > > + regulator-state-mem {
> > > > + regulator-off-in-suspend;
> > > > + };
> > > > };
> > > >
> > > > ldo14_reg: LDO14 {
> > > > @@ -364,6 +397,9 @@
> > > > regulator-max-microvolt = <1800000>;
> > > > regulator-always-on;
> > > > regulator-boot-on;
> > > > + regulator-state-mem {
> > > > + regulator-off-in-suspend;
> > > > + };
> > > > };
> > > >
> > > > ldo15_reg: LDO15 {
> > > > @@ -372,6 +408,9 @@
> > > > regulator-max-microvolt = <1000000>;
> > > > regulator-always-on;
> > > > regulator-boot-on;
> > > > + regulator-state-mem {
> > > > + regulator-off-in-suspend;
> > > > + };
> > > > };
> > > >
> > > > ldo16_reg: LDO16 {
> > > > @@ -380,6 +419,9 @@
> > > > regulator-max-microvolt = <1800000>;
> > > > regulator-always-on;
> > > > regulator-boot-on;
> > > > + regulator-state-mem {
> > > > + regulator-on-in-suspend;
> > > > + };
> > > > };
> > > >
> > > > ldo20_reg: LDO20 {
> > > > @@ -387,6 +429,9 @@
> > > > regulator-min-microvolt = <1800000>;
> > > > regulator-max-microvolt = <1800000>;
> > > > regulator-boot-on;
> > > > + regulator-state-mem {
> > > > + regulator-off-in-suspend;
> > > > + };
> > > > };
> > > >
> > > > ldo21_reg: LDO21 {
> > > > @@ -394,6 +439,9 @@
> > > > regulator-min-microvolt = <2800000>;
> > > > regulator-max-microvolt = <2800000>;
> > > > regulator-boot-on;
> > > > + regulator-state-mem {
> > > > + regulator-on-in-suspend;
> > >
> > > That's unusual setting... enabled in suspend but not necessarily
> > > during work (no always-on).
> > >
> >
> > I kept the regulator required for emmc/sd card in
> > regulator-on-in-suspend in suspend mode.
> >
> > > > + };
> > > > };
> > > >
> > > > ldo22_reg: LDO22 {
> > > > @@ -411,6 +459,9 @@
> > > > regulator-max-microvolt = <1800000>;
> > > > regulator-always-on;
> > > > regulator-boot-on;
> > > > + regulator-state-mem {
> > > > + regulator-off-in-suspend;
> > > > + };
> > > > };
> > > >
> > > > buck1_reg: BUCK1 {
> > > > @@ -419,6 +470,9 @@
> > > > regulator-max-microvolt = <1100000>;
> > > > regulator-always-on;
> > > > regulator-boot-on;
> > > > + regulator-state-mem {
> > > > + regulator-off-in-suspend;
> > > > + };
> > >
> > > This is seriously wrong so I have doubts whether you tested the
> > > changes or you know what is happening with them. If you turn off
> > > memory bus regulator off, how the memory will work in
> > > Suspend-to-Memory mode?
> > >
> >
> > Well I did not find any issue in my testing but I might be wrong.
> > Ok I will drop this changes in the next version of the patch where
> > regulator-always-on is set.
>
> It worked fine because regulator-off-in-suspend is noop for buck1 but
> it is clearly wrong from logical point of view. Do you think that
> memory should be off in Suspend to RAM?
>
My bad setting this for buck setting I will drop this in the future patch.
> > > > };
> > > >
> > > > buck2_reg: BUCK2 {
> > > > @@ -427,6 +481,9 @@
> > > > regulator-max-microvolt = <1350000>;
> > > > regulator-always-on;
> > > > regulator-boot-on;
> > > > + regulator-state-mem {
> > > > + regulator-on-in-suspend;
> > > > + };
> > > > };
> > > >
> > > > buck3_reg: BUCK3 {
> > > > @@ -435,6 +492,9 @@
> > > > regulator-max-microvolt = <1050000>;
> > > > regulator-always-on;
> > > > regulator-boot-on;
> > > > + regulator-state-mem {
> > > > + regulator-off-in-suspend;
> > >
> > > Looks suspicious as well.
> >
> > Ok I will drop this changes in the next version of the patch where
> > regulator-always-on is set.
> >
> > >
> > > Best regards,
> > > Krzysztof
> > >
> >
> > Well I have tested this patch as following
> > with only one issue, before enable suspend number of On-line cpu is 4
> > after resume number of On-line cpu is 1.
>
> If before your change number of resumed CPUs was 4, then you
> apparently break some things.
>
> Best regards,
> Krzysztof

Ok I will double check that I do not break any feature.

Best Regards
-Anand

Next message: Martin K. Petersen: "Re: [PATCH 2/2] loop: Better discard support for block devices"
Previous message: Christian Brauner: "Re: [PATCH v3] signal: add procfd_send_signal() syscall"
In reply to: Krzysztof Kozlowski: "Re: [PATCH] ARM: dts: exynos: Add proper regulator states for suspend-to-mem for odroid-u3"
Next in thread: Anand Moon: "Re: [PATCH] ARM: dts: exynos: Add proper regulator states for suspend-to-mem for odroid-u3"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]