Re: [PATCH 2/2] remoteproc: sysmon: Wait for shutdown-ack/ind on sysmon shutdown

[Bjorn Andersson]

On Tue 20 Nov 13:02 PST 2018, Sibi Sankar wrote:

> After sending a sysmon shutdown request to the SSCTL service on the
> subsystem, wait for the service to send shutdown-ack interrupt or
> an indication message back.
> 

So we get a reply immediate on the shutdown request, and then some time
later we get either an indication or an interrupt to state that it's
actually complete?

> Signed-off-by: Sibi Sankar <sibis@xxxxxxxxxxxxxx>
> ---
>  drivers/remoteproc/qcom_sysmon.c | 59 +++++++++++++++++++++++++++++++-
>  1 file changed, 58 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/remoteproc/qcom_sysmon.c b/drivers/remoteproc/qcom_sysmon.c
[..]
> @@ -283,6 +311,14 @@ static void ssctl_request_shutdown(struct qcom_sysmon *sysmon)
>  		dev_err(sysmon->dev, "shutdown request failed\n");
>  	else
>  		dev_dbg(sysmon->dev, "shutdown request completed\n");
> +
> +	if (sysmon->shutdown_irq > 0) {
> +		ret = wait_for_completion_timeout(&sysmon->shutdown_comp,
> +						  msecs_to_jiffies(5000));

5 * HZ

> +		if (!ret)
> +			dev_err(sysmon->dev,
> +				"timeout waiting for shutdown ack\n");
> +	}
>  }
[..]
> @@ -453,14 +499,25 @@ struct qcom_sysmon *qcom_add_sysmon_subdev(struct rproc *rproc,
>  
>  	sysmon->dev = rproc->dev.parent;
>  	sysmon->rproc = rproc;
> +	pdev = container_of(sysmon->dev, struct platform_device, dev);
>  
>  	sysmon->name = name;
>  	sysmon->ssctl_instance = ssctl_instance;
>  
>  	init_completion(&sysmon->comp);
> +	init_completion(&sysmon->shutdown_comp);
>  	mutex_init(&sysmon->lock);
>  
> -	ret = qmi_handle_init(&sysmon->qmi, SSCTL_MAX_MSG_LEN, &ssctl_ops, NULL);
> +	sysmon->shutdown_irq = platform_get_irq_byname(pdev, "shutdown-ack");

Use of_irq_get_byname() on sysmon->dev instead of relying on the fact
that the remoteproc driver is a platform_device.

Also, check and handle the return value - because an EPROBE_DEFER here
will be turned into a -EINVAL by devm_request_threaded_irq().

> +	ret = devm_request_threaded_irq(sysmon->dev, sysmon->shutdown_irq,
> +					NULL, sysmon_shutdown_interrupt,
> +					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
> +					"q6v5 shutdown-ack", sysmon);
> +	if (ret)
> +		dev_err(sysmon->dev, "failed to acquire shutdown-ack IRQ\n");

In the event that sysmon->shutdown_irq is != -ENODATA, you should fail
here.

> +
> +	ret = qmi_handle_init(&sysmon->qmi, SSCTL_MAX_MSG_LEN, &ssctl_ops,
> +			      qmi_indication_handler);

Regards,
Bjorn