Re: [PATCH RFC 1/1] swiotlb: add debugfs to track swiotlb buffer usage
From: Joe Jin
Date: Thu Dec 06 2018 - 11:12:25 EST
Hi Dongli,
Maybe move d_swiotlb_usage declare into swiotlb_create_debugfs():
void swiotlb_create_debugfs(void)
{
#ifdef CONFIG_DEBUG_FS
static struct dentry *d_swiotlb_usage = NULL;
if (d_swiotlb_usage)
return;
d_swiotlb_usage = debugfs_create_dir("swiotlb", NULL);
if (!d_swiotlb_usage)
return;
debugfs_create_file("usage", 0600, d_swiotlb_usage,
NULL, &swiotlb_usage_fops);
#endif
}
And for io_tlb_used, possible add a check at the begin of swiotlb_tbl_map_single(),
if there were not any free slots or not enough slots, return fail directly?
Thanks,
Joe
On 12/5/18 7:59 PM, Dongli Zhang wrote:
> The device driver will not be able to do dma operations once swiotlb buffer
> is full, either because the driver is using so many IO TLB blocks inflight,
> or because there is memory leak issue in device driver. To export the
> swiotlb buffer usage via debugfs would help the user estimate the size of
> swiotlb buffer to pre-allocate or analyze device driver memory leak issue.
>
> As the swiotlb can be initialized at very early stage when debugfs cannot
> register successfully, this patch creates the debugfs entry on demand.
>
> Signed-off-by: Dongli Zhang <dongli.zhang@xxxxxxxxxx>
> ---
> kernel/dma/swiotlb.c | 57 ++++++++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 57 insertions(+)
>
> diff --git a/kernel/dma/swiotlb.c b/kernel/dma/swiotlb.c
> index 045930e..d3c8aa4 100644
> --- a/kernel/dma/swiotlb.c
> +++ b/kernel/dma/swiotlb.c
> @@ -35,6 +35,9 @@
> #include <linux/scatterlist.h>
> #include <linux/mem_encrypt.h>
> #include <linux/set_memory.h>
> +#ifdef CONFIG_DEBUG_FS
> +#include <linux/debugfs.h>
> +#endif
>
> #include <asm/io.h>
> #include <asm/dma.h>
> @@ -73,6 +76,13 @@ static phys_addr_t io_tlb_start, io_tlb_end;
> */
> static unsigned long io_tlb_nslabs;
>
> +#ifdef CONFIG_DEBUG_FS
> +/*
> + * The number of used IO TLB block
> + */
> +static unsigned long io_tlb_used;
> +#endif
> +
> /*
> * This is a free list describing the number of free entries available from
> * each index
> @@ -100,6 +110,41 @@ static DEFINE_SPINLOCK(io_tlb_lock);
>
> static int late_alloc;
>
> +#ifdef CONFIG_DEBUG_FS
> +
> +static struct dentry *d_swiotlb_usage;
> +
> +static int swiotlb_usage_show(struct seq_file *m, void *v)
> +{
> + seq_printf(m, "%lu\n%lu\n", io_tlb_used, io_tlb_nslabs);
> + return 0;
> +}
> +
> +static int swiotlb_usage_open(struct inode *inode, struct file *filp)
> +{
> + return single_open(filp, swiotlb_usage_show, NULL);
> +}
> +
> +static const struct file_operations swiotlb_usage_fops = {
> + .open = swiotlb_usage_open,
> + .read = seq_read,
> + .llseek = seq_lseek,
> + .release = single_release,
> +};
> +
> +void swiotlb_create_debugfs(void)
> +{
> + d_swiotlb_usage = debugfs_create_dir("swiotlb", NULL);
> +
> + if (!d_swiotlb_usage)
> + return;
> +
> + debugfs_create_file("usage", 0600, d_swiotlb_usage,
> + NULL, &swiotlb_usage_fops);
> +}
> +
> +#endif
> +
> static int __init
> setup_io_tlb_npages(char *str)
> {
> @@ -449,6 +494,11 @@ phys_addr_t swiotlb_tbl_map_single(struct device *hwdev,
> pr_warn_once("%s is active and system is using DMA bounce buffers\n",
> sme_active() ? "SME" : "SEV");
>
> +#ifdef CONFIG_DEBUG_FS
> + if (unlikely(!d_swiotlb_usage))
> + swiotlb_create_debugfs();
> +#endif
> +
> mask = dma_get_seg_boundary(hwdev);
>
> tbl_dma_addr &= mask;
> @@ -528,6 +578,9 @@ phys_addr_t swiotlb_tbl_map_single(struct device *hwdev,
> dev_warn(hwdev, "swiotlb buffer is full (sz: %zd bytes)\n", size);
> return SWIOTLB_MAP_ERROR;
> found:
> +#ifdef CONFIG_DEBUG_FS
> + io_tlb_used += nslots;
> +#endif
> spin_unlock_irqrestore(&io_tlb_lock, flags);
>
> /*
> @@ -588,6 +641,10 @@ void swiotlb_tbl_unmap_single(struct device *hwdev, phys_addr_t tlb_addr,
> */
> for (i = index - 1; (OFFSET(i, IO_TLB_SEGSIZE) != IO_TLB_SEGSIZE -1) && io_tlb_list[i]; i--)
> io_tlb_list[i] = ++count;
> +
> +#ifdef CONFIG_DEBUG_FS
> + io_tlb_used -= nslots;
> +#endif
> }
> spin_unlock_irqrestore(&io_tlb_lock, flags);
> }
>