[PATCH v2 4/4] media: dt-bindings: Add binding for si470x radio
From: PaweÅ Chmiel
Date: Fri Dec 07 2018 - 08:58:37 EST
Add device tree bindings for si470x family radio receiver driver.
Signed-off-by: PaweÅ Chmiel <pawel.mikolaj.chmiel@xxxxxxxxx>
---
Changes from v1:
- squashed with patch adding reset-gpio documentation
---
.../devicetree/bindings/media/si470x.txt | 26 +++++++++++++++++++
1 file changed, 26 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/si470x.txt
diff --git a/Documentation/devicetree/bindings/media/si470x.txt b/Documentation/devicetree/bindings/media/si470x.txt
new file mode 100644
index 000000000000..a9403558362e
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/si470x.txt
@@ -0,0 +1,26 @@
+* Silicon Labs FM Radio receiver
+
+The Silicon Labs Si470x is family of FM radio receivers with receive power scan
+supporting 76-108 MHz, programmable through an I2C interface.
+Some of them includes an RDS encoder.
+
+Required Properties:
+- compatible: Should contain "silabs,si470x"
+- reg: the I2C address of the device
+
+Optional Properties:
+- interrupts : The interrupt number
+- reset-gpios: GPIO specifier for the chips reset line
+
+Example:
+
+&i2c2 {
+ si470x@63 {
+ compatible = "silabs,si470x";
+ reg = <0x63>;
+
+ interrupt-parent = <&gpj2>;
+ interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&gpj2 5 GPIO_ACTIVE_HIGH>;
+ };
+};
--
2.17.1