[PATCH v3 1/2] USB: quirks: Check device interface LPM capability

[Kyle Williams]

From: Kyle Williams <kdgwill@xxxxxxxxxxxx>

Description: enable the ability to disable LPM for all devices matched
by interface information

Signed-off-by: Kyle Williams <kdgwill@xxxxxxxxxxxx>
---
 drivers/usb/core/hub.c | 87 +++++++++++++++++++++++-------------------
 1 file changed, 48 insertions(+), 39 deletions(-)

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 0f9381b69a3b..8f366ec4d21b 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -365,6 +365,51 @@ static void usb_set_lpm_parameters(struct usb_device *udev)
 	usb_set_lpm_sel(udev, &udev->u2_params);
 }
 
+/*
+ * There are reports of USB 3.0 devices that say they support USB 2.0 Link PM
+ * when they're plugged into a USB 2.0 port, but they don't work when LPM is
+ * enabled.
+ *
+ * Only enable USB 2.0 Link PM if the port is internal (hardwired), or the
+ * device says it supports the new USB 2.0 Link PM errata by setting the BESL
+ * support bit in the BOS descriptor.
+ */
+static void hub_set_initial_usb2_lpm_policy(struct usb_device *udev)
+{
+	struct usb_hub *hub = usb_hub_to_struct_hub(udev->parent);
+	int connect_type = USB_PORT_CONNECT_TYPE_UNKNOWN;
+
+	if (!udev->usb2_hw_lpm_capable || !udev->bos)
+		return;
+
+	if (hub)
+		connect_type = hub->ports[udev->portnum - 1]->connect_type;
+
+	if ((udev->bos->ext_cap->bmAttributes & cpu_to_le32(USB_BESL_SUPPORT))
+			|| connect_type == USB_PORT_CONNECT_TYPE_HARD_WIRED) {
+		udev->usb2_hw_lpm_allowed = 1;
+		usb_set_usb2_hardware_lpm(udev, 1);
+	}
+}
+
+void usb_update_device_lpm(struct usb_hcd *hcd, struct usb_device *udev)
+{
+	int retval;
+
+	if (udev->wusb == 0 && le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0201) {
+		retval = usb_get_bos_descriptor(udev);
+		if (!retval) {
+			udev->lpm_capable = usb_device_supports_lpm(udev);
+			usb_set_lpm_parameters(udev);
+		}
+	}
+
+	/* notify HCD that we have a device connected and addressed */
+	if (hcd->driver->update_device)
+		hcd->driver->update_device(hcd, udev);
+	hub_set_initial_usb2_lpm_policy(udev);
+}
+
 /* USB 2.0 spec Section 11.24.4.5 */
 static int get_hub_descriptor(struct usb_device *hdev,
 		struct usb_hub_descriptor *desc)
@@ -2295,7 +2340,6 @@ static int usb_enumerate_device_otg(struct usb_device *udev)
 	return err;
 }
 
-
 /**
  * usb_enumerate_device - Read device configs/intfs/otg (usbcore-internal)
  * @udev: newly addressed device (in ADDRESS state)
@@ -2351,6 +2395,8 @@ static int usb_enumerate_device(struct usb_device *udev)
 
 	usb_detect_interface_quirks(udev);
 
+	usb_update_device_lpm(hcd, udev);
+
 	return 0;
 }
 
@@ -4402,33 +4448,6 @@ static int hub_set_address(struct usb_device *udev, int devnum)
 	return retval;
 }
 
-/*
- * There are reports of USB 3.0 devices that say they support USB 2.0 Link PM
- * when they're plugged into a USB 2.0 port, but they don't work when LPM is
- * enabled.
- *
- * Only enable USB 2.0 Link PM if the port is internal (hardwired), or the
- * device says it supports the new USB 2.0 Link PM errata by setting the BESL
- * support bit in the BOS descriptor.
- */
-static void hub_set_initial_usb2_lpm_policy(struct usb_device *udev)
-{
-	struct usb_hub *hub = usb_hub_to_struct_hub(udev->parent);
-	int connect_type = USB_PORT_CONNECT_TYPE_UNKNOWN;
-
-	if (!udev->usb2_hw_lpm_capable || !udev->bos)
-		return;
-
-	if (hub)
-		connect_type = hub->ports[udev->portnum - 1]->connect_type;
-
-	if ((udev->bos->ext_cap->bmAttributes & cpu_to_le32(USB_BESL_SUPPORT)) ||
-			connect_type == USB_PORT_CONNECT_TYPE_HARD_WIRED) {
-		udev->usb2_hw_lpm_allowed = 1;
-		usb_set_usb2_hardware_lpm(udev, 1);
-	}
-}
-
 static int hub_enable_device(struct usb_device *udev)
 {
 	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
@@ -4779,19 +4798,9 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1,
 
 	usb_detect_quirks(udev);
 
-	if (udev->wusb == 0 && le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0201) {
-		retval = usb_get_bos_descriptor(udev);
-		if (!retval) {
-			udev->lpm_capable = usb_device_supports_lpm(udev);
-			usb_set_lpm_parameters(udev);
-		}
-	}
+	usb_update_device_lpm(hcd, udev);
 
 	retval = 0;
-	/* notify HCD that we have a device connected and addressed */
-	if (hcd->driver->update_device)
-		hcd->driver->update_device(hcd, udev);
-	hub_set_initial_usb2_lpm_policy(udev);
 fail:
 	if (retval) {
 		hub_port_disable(hub, port1, 0);
-- 
2.20.0.rc2.403.gdbc3b29805-goog