Re: [PATCH v5 2/6] arm64: add basic DTS for i.MX8MQ

[Rob Herring]

On Sun, 9 Dec 2018 14:26:07 +0000, Abel Vesa wrote:
> From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
> 
> This adds the basic DTS for the i.MX8MQ.
> For now only the following peripherals are supported:
> - IOMUXC (pin controller)
> - CCM (clock controller)
> - GPIO
> - UART
> - uSDHC (SD/eMMC controller)
> - FEC (ethernet controller)
> - i2c
> 
> This is enough to get a very basic board support up and running.
> 
> One known limitation is that the driver for the GPC interrupt
> controller is still missing, rendering the CPU sleep states unusable
> as there is nothing waking them up anymore.
> 
> Signed-off-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
> Reviewed-by: Dong Aisheng <Aisheng.dong@xxxxxxx>
> ---
>  Documentation/devicetree/bindings/arm/fsl.txt  |   4 +
>  arch/arm64/boot/dts/freescale/imx8mq-pinfunc.h | 623 +++++++++++++++++++++++++
>  arch/arm64/boot/dts/freescale/imx8mq.dtsi      | 392 ++++++++++++++++
>  3 files changed, 1019 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-pinfunc.h
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mq.dtsi
> 

Reviewed-by: Rob Herring <robh@xxxxxxxxxx>