[PATCH] regulator: lm363x: Let core handle GPIO descriptor

From: Linus Walleij
Date: Thu Dec 06 2018 - 07:43:39 EST


Use the gpiod_get() rather than the devm_* version so that the
regulator core can handle the lifecycle of these descriptors.

Fixes: b2d751b7f69b ("regulator: lm363x: Pass descriptor instead of GPIO number")
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Reviewed-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
Reviewed-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
---
drivers/regulator/lm363x-regulator.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/regulator/lm363x-regulator.c b/drivers/regulator/lm363x-regulator.c
index bbedb08d257b..8c0e8419c43f 100644
--- a/drivers/regulator/lm363x-regulator.c
+++ b/drivers/regulator/lm363x-regulator.c
@@ -224,13 +224,15 @@ static struct gpio_desc *lm363x_regulator_of_get_enable_gpio(struct device *dev,
/*
* Check LCM_EN1/2_GPIO is configured.
* Those pins are used for enabling VPOS/VNEG LDOs.
+ * Do not use devm* here: the regulator core takes over the
+ * lifecycle management of the GPIO descriptor.
*/
switch (id) {
case LM3632_LDO_POS:
- return devm_gpiod_get_index_optional(dev, "enable", 0,
+ return gpiod_get_index_optional(dev, "enable", 0,
GPIOD_OUT_LOW | GPIOD_FLAGS_BIT_NONEXCLUSIVE);
case LM3632_LDO_NEG:
- return devm_gpiod_get_index_optional(dev, "enable", 1,
+ return gpiod_get_index_optional(dev, "enable", 1,
GPIOD_OUT_LOW | GPIOD_FLAGS_BIT_NONEXCLUSIVE);
default:
return NULL;
@@ -263,6 +265,8 @@ static int lm363x_regulator_probe(struct platform_device *pdev)
LM3632_EXT_EN_MASK,
LM3632_EXT_EN_MASK);
if (ret) {
+ if (gpiod)
+ gpiod_put(gpiod);
dev_err(dev, "External pin err: %d\n", ret);
return ret;
}
--
2.19.0.rc2