Re: [PATCH 5/5] i2c: mediatek: Add i2c compatible for MediaTek MT8183

From: Qii Wang
Date: Wed Dec 12 2018 - 02:18:55 EST

Next message: Christophe Leroy: "Re: [PATCH v3] powerpc: implement CONFIG_DEBUG_VIRTUAL"
Previous message: Greg Kroah-Hartman: "Re: [PATCH 4.19 051/118] flexfiles: use per-mirror specified stateid for IO"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Mon, 2018-12-03 at 21:49 -0800, Sean Wang wrote:
> <qii.wang@xxxxxxxxxxxx> æ 2018å12æ3æ éä äå5:34åéï
> >
> > From: qii wang <qii.wang@xxxxxxxxxxxx>
> >
> > Add i2c compatible for MT8183. Compare to 2712 i2c controller, MT8183 has
> > different registers, offsets, clock, and multi-user function.
> >
> > Signed-off-by: qii wang <qii.wang@xxxxxxxxxxxx>
> > ---
> > drivers/i2c/busses/i2c-mt65xx.c | 136 +++++++++++++++++++++++++++++++++++++--
> > 1 file changed, 130 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
> > index 428ac99..6b979ab 100644
> > --- a/drivers/i2c/busses/i2c-mt65xx.c
> > +++ b/drivers/i2c/busses/i2c-mt65xx.c
> > @@ -35,17 +35,23 @@
> > #include <linux/slab.h>
> >
> > #define I2C_RS_TRANSFER (1 << 4)
> > +#define I2C_ARB_LOST (1 << 3)
>
> it seems no one refers to the macro in the patch so it should be
> better to be removed
>

ok, I miss it, I will use it in the next patch.

> > #define I2C_HS_NACKERR (1 << 2)
> > #define I2C_ACKERR (1 << 1)
> > #define I2C_TRANSAC_COMP (1 << 0)
> > #define I2C_TRANSAC_START (1 << 0)
> > +#define I2C_RESUME_ARBIT (1 << 1)
> > #define I2C_RS_MUL_CNFG (1 << 15)
> > #define I2C_RS_MUL_TRIG (1 << 14)
> > +#define I2C_HS_TIME_EN (1 << 7)
> > #define I2C_DCM_DISABLE 0x0000
> > #define I2C_IO_CONFIG_OPEN_DRAIN 0x0003
> > #define I2C_IO_CONFIG_PUSH_PULL 0x0000
> > #define I2C_SOFT_RST 0x0001
> > #define I2C_FIFO_ADDR_CLR 0x0001
> > +#define I2C_FIFO_ADDR_CLRH 0x0002
> > +#define I2C_FIFO_ADDR_CLR_MCH 0x0004
> > +#define I2C_HFIFO_DATA 0x8208
> > #define I2C_DELAY_LEN 0x0002
> > #define I2C_ST_START_CON 0x8001
> > #define I2C_FS_START_CON 0x1800
> > @@ -76,6 +82,8 @@
> > #define I2C_CONTROL_DIR_CHANGE (0x1 << 4)
> > #define I2C_CONTROL_ACKERR_DET_EN (0x1 << 5)
> > #define I2C_CONTROL_TRANSFER_LEN_CHANGE (0x1 << 6)
> > +#define I2C_CONTROL_DMAACK_EN (0x1 << 8)
> > +#define I2C_CONTROL_ASYNC_MODE (0x1 << 9)
> > #define I2C_CONTROL_WRAPPER (0x1 << 0)
> >
> > #define I2C_DRV_NAME "i2c-mt65xx"
> > @@ -130,6 +138,15 @@ enum I2C_REGS_OFFSET {
> > OFFSET_DEBUGCTRL,
> > OFFSET_TRANSFER_LEN_AUX,
> > OFFSET_CLOCK_DIV,
> > + /* MT8183 only regs */
> > + OFFSET_LTIMING,
> > + OFFSET_DATA_TIMING,
> > + OFFSET_MCU_INTR,
> > + OFFSET_HW_TIMEOUT,
> > + OFFSET_HFIFO_DATA,
> > + OFFSET_HFIFO_STAT,
> > + OFFSET_MULTI_DMA,
> > + OFFSET_ROLLBACK,
> > };
> >
> > static const u16 mt_i2c_regs_v1[] = {
> > @@ -159,6 +176,39 @@ enum I2C_REGS_OFFSET {
> > [OFFSET_CLOCK_DIV] = 0x70,
> > };
> >
> > +static const u16 mt_i2c_regs_v2[] = {
> > + [OFFSET_DATA_PORT] = 0x0,
> > + [OFFSET_SLAVE_ADDR] = 0x4,
> > + [OFFSET_INTR_MASK] = 0x8,
> > + [OFFSET_INTR_STAT] = 0xc,
> > + [OFFSET_CONTROL] = 0x10,
> > + [OFFSET_TRANSFER_LEN] = 0x14,
> > + [OFFSET_TRANSAC_LEN] = 0x18,
> > + [OFFSET_DELAY_LEN] = 0x1c,
> > + [OFFSET_TIMING] = 0x20,
> > + [OFFSET_START] = 0x24,
> > + [OFFSET_EXT_CONF] = 0x28,
> > + [OFFSET_LTIMING] = 0x2c,
> > + [OFFSET_HS] = 0x30,
> > + [OFFSET_IO_CONFIG] = 0x34,
> > + [OFFSET_FIFO_ADDR_CLR] = 0x38,
> > + [OFFSET_DATA_TIMING] = 0x3c,
> > + [OFFSET_MCU_INTR] = 0x40,
> > + [OFFSET_TRANSFER_LEN_AUX] = 0x44,
> > + [OFFSET_CLOCK_DIV] = 0x48,
> > + [OFFSET_HW_TIMEOUT] = 0x4c,
> > + [OFFSET_SOFTRESET] = 0x50,
> > + [OFFSET_HFIFO_DATA] = 0x70,
> > + [OFFSET_DEBUGSTAT] = 0xe0,
> > + [OFFSET_DEBUGCTRL] = 0xe8,
> > + [OFFSET_FIFO_STAT] = 0xf4,
> > + [OFFSET_FIFO_THRESH] = 0xf8,
> > + [OFFSET_HFIFO_STAT] = 0xfc,
> > + [OFFSET_DCM_EN] = 0xf88,
> > + [OFFSET_MULTI_DMA] = 0xf8c,
> > + [OFFSET_ROLLBACK] = 0xf98,
> > +};
> > +
> > struct mtk_i2c_compatible {
> > const struct i2c_adapter_quirks *quirks;
> > const u16 *regs;
> > @@ -168,6 +218,7 @@ struct mtk_i2c_compatible {
> > unsigned char aux_len_reg: 1;
> > unsigned char support_33bits: 1;
> > unsigned char timing_adjust: 1;
> > + unsigned char dma_sync: 1;
> > };
> >
> > struct mtk_i2c {
> > @@ -181,8 +232,11 @@ struct mtk_i2c {
> > struct clk *clk_main; /* main clock for i2c bus */
> > struct clk *clk_dma; /* DMA clock for i2c via DMA */
> > struct clk *clk_pmic; /* PMIC clock for i2c from PMIC */
> > + struct clk *clk_arb; /* Arbitrator clock for i2c */
> > bool have_pmic; /* can use i2c pins from PMIC */
> > bool use_push_pull; /* IO config push-pull mode */
> > + bool share_i3c; /* share i3c IP*/
> > + u32 ch_offset; /* i2c multi-user channel offset */
> >
> > u16 irq_stat; /* interrupt status */
> > unsigned int clk_src_div;
> > @@ -190,6 +244,7 @@ struct mtk_i2c {
> > enum mtk_trans_op op;
> > u16 timing_reg;
> > u16 high_speed_reg;
> > + u16 ltiming_reg;
> > unsigned char auto_restart;
> > bool ignore_restart_irq;
> > const struct mtk_i2c_compatible *dev_comp;
> > @@ -216,6 +271,7 @@ struct mtk_i2c {
> > .aux_len_reg = 1,
> > .support_33bits = 1,
> > .timing_adjust = 1,
> > + .dma_sync = 0,
> > };
> >
> > static const struct mtk_i2c_compatible mt6577_compat = {
> > @@ -227,6 +283,7 @@ struct mtk_i2c {
> > .aux_len_reg = 0,
> > .support_33bits = 0,
> > .timing_adjust = 0,
> > + .dma_sync = 0,
> > };
> >
> > static const struct mtk_i2c_compatible mt6589_compat = {
> > @@ -238,6 +295,7 @@ struct mtk_i2c {
> > .aux_len_reg = 0,
> > .support_33bits = 0,
> > .timing_adjust = 0,
> > + .dma_sync = 0,
> > };
> >
> > static const struct mtk_i2c_compatible mt7622_compat = {
> > @@ -249,6 +307,7 @@ struct mtk_i2c {
> > .aux_len_reg = 1,
> > .support_33bits = 0,
> > .timing_adjust = 0,
> > + .dma_sync = 0,
> > };
> >
> > static const struct mtk_i2c_compatible mt8173_compat = {
> > @@ -259,6 +318,18 @@ struct mtk_i2c {
> > .aux_len_reg = 1,
> > .support_33bits = 1,
> > .timing_adjust = 0,
> > + .dma_sync = 0,
> > +};
> > +
> > +static const struct mtk_i2c_compatible mt8183_compat = {
> > + .regs = mt_i2c_regs_v2,
> > + .pmic_i2c = 0,
> > + .dcm = 0,
> > + .auto_restart = 1,
> > + .aux_len_reg = 1,
> > + .support_33bits = 1,
> > + .timing_adjust = 1,
> > + .dma_sync = 1,
> > };
> >
> > static const struct of_device_id mtk_i2c_of_match[] = {
> > @@ -267,19 +338,20 @@ struct mtk_i2c {
> > { .compatible = "mediatek,mt6589-i2c", .data = &mt6589_compat },
> > { .compatible = "mediatek,mt7622-i2c", .data = &mt7622_compat },
> > { .compatible = "mediatek,mt8173-i2c", .data = &mt8173_compat },
> > + { .compatible = "mediatek,mt8183-i2c", .data = &mt8183_compat },
> > {}
> > };
> > MODULE_DEVICE_TABLE(of, mtk_i2c_of_match);
> >
> > static u16 mtk_i2c_readw(struct mtk_i2c *i2c, enum I2C_REGS_OFFSET reg)
> > {
> > - return readw(i2c->base + i2c->dev_comp->regs[reg]);
> > + return readw(i2c->base + i2c->ch_offset + i2c->dev_comp->regs[reg]);
> > }
> >
> > static void mtk_i2c_writew(struct mtk_i2c *i2c, u16 val,
> > enum I2C_REGS_OFFSET reg)
> > {
> > - writew(val, i2c->base + i2c->dev_comp->regs[reg]);
> > + writew(val, i2c->base + i2c->ch_offset + i2c->dev_comp->regs[reg]);
> > }
> >
> > static int mtk_i2c_clock_enable(struct mtk_i2c *i2c)
> > @@ -299,8 +371,18 @@ static int mtk_i2c_clock_enable(struct mtk_i2c *i2c)
> > if (ret)
> > goto err_pmic;
> > }
> > +
> > + if (i2c->clk_arb) {
> > + ret = clk_prepare_enable(i2c->clk_arb);
> > + if (ret)
> > + goto err_arb;
> > + }
> > +
> > return 0;
> >
> > +err_arb:
> > + if (i2c->have_pmic)
> > + clk_disable_unprepare(i2c->clk_pmic);
> > err_pmic:
> > clk_disable_unprepare(i2c->clk_main);
> > err_main:
> > @@ -311,6 +393,9 @@ static int mtk_i2c_clock_enable(struct mtk_i2c *i2c)
> >
> > static void mtk_i2c_clock_disable(struct mtk_i2c *i2c)
> > {
> > + if (i2c->clk_arb)
> > + clk_disable_unprepare(i2c->clk_arb);
> > +
> > if (i2c->have_pmic)
> > clk_disable_unprepare(i2c->clk_pmic);
> >
> > @@ -333,11 +418,23 @@ static void mtk_i2c_init_hw(struct mtk_i2c *i2c)
> > if (i2c->dev_comp->dcm)
> > mtk_i2c_writew(i2c, I2C_DCM_DISABLE, OFFSET_DCM_EN);
> >
> > - if (i2c->dev_comp->timing_adjust)
> > + if (i2c->ch_offset)
> > + writew(I2C_RESUME_ARBIT, i2c->base +
> > + i2c->dev_comp->regs[OFFSET_START]);
> > +
> > + if (i2c->dev_comp->timing_adjust && i2c->share_i3c) {
> > + mtk_i2c_writew(i2c, (I2C_DEFAULT_CLK_DIV - 1) |
> > + (I2C_DEFAULT_CLK_DIV - 1) << 8,
> > + OFFSET_CLOCK_DIV);
> > + i2c->high_speed_reg |= I2C_HS_TIME_EN;
> > + } else {
> > mtk_i2c_writew(i2c, I2C_DEFAULT_CLK_DIV - 1, OFFSET_CLOCK_DIV);
> > + }
> >
> > mtk_i2c_writew(i2c, i2c->timing_reg, OFFSET_TIMING);
> > mtk_i2c_writew(i2c, i2c->high_speed_reg, OFFSET_HS);
> > + if (i2c->dev_comp->regs == mt_i2c_regs_v2)
> > + mtk_i2c_writew(i2c, i2c->ltiming_reg, OFFSET_LTIMING);
> >
> > /* If use i2c pin from PMIC mt6397 side, need set PATH_DIR first */
> > if (i2c->have_pmic)
> > @@ -345,6 +442,9 @@ static void mtk_i2c_init_hw(struct mtk_i2c *i2c)
> >
> > control_reg = I2C_CONTROL_ACKERR_DET_EN |
> > I2C_CONTROL_CLK_EXT_EN | I2C_CONTROL_DMA_EN;
> > + if (i2c->dev_comp->dma_sync)
> > + control_reg |= I2C_CONTROL_DMAACK_EN | I2C_CONTROL_ASYNC_MODE;
> > +
> > mtk_i2c_writew(i2c, control_reg, OFFSET_CONTROL);
> > mtk_i2c_writew(i2c, I2C_DELAY_LEN, OFFSET_DELAY_LEN);
> >
> > @@ -434,6 +534,8 @@ static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk)
> > unsigned int clk_src;
> > unsigned int step_cnt;
> > unsigned int sample_cnt;
> > + unsigned int l_step_cnt;
> > + unsigned int l_sample_cnt;
> > unsigned int target_speed;
> > int ret;
> >
> > @@ -443,11 +545,11 @@ static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk)
> > if (target_speed > MAX_FS_MODE_SPEED) {
> > /* Set master code speed register */
> > ret = mtk_i2c_calculate_speed(i2c, clk_src, MAX_FS_MODE_SPEED,
> > - &step_cnt, &sample_cnt);
> > + &l_step_cnt, &l_sample_cnt);
> > if (ret < 0)
> > return ret;
> >
> > - i2c->timing_reg = (sample_cnt << 8) | step_cnt;
> > + i2c->timing_reg = (l_sample_cnt << 8) | l_step_cnt;
> >
> > /* Set the high speed mode register */
> > ret = mtk_i2c_calculate_speed(i2c, clk_src, target_speed,
> > @@ -457,6 +559,8 @@ static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk)
> >
> > i2c->high_speed_reg = I2C_TIME_DEFAULT_VALUE |
> > (sample_cnt << 12) | (step_cnt << 8);
> > + i2c->ltiming_reg = (l_sample_cnt << 6) | l_step_cnt |
> > + (sample_cnt << 12) | (step_cnt << 9);
> > } else {
> > ret = mtk_i2c_calculate_speed(i2c, clk_src, target_speed,
> > &step_cnt, &sample_cnt);
> > @@ -467,6 +571,8 @@ static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk)
> >
> > /* Disable the high speed transaction */
> > i2c->high_speed_reg = I2C_TIME_CLR_VALUE;
> > +
> > + i2c->ltiming_reg = (sample_cnt << 6) | step_cnt;
> > }
> >
> > return 0;
> > @@ -483,6 +589,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
> > u16 addr_reg;
> > u16 start_reg;
> > u16 control_reg;
> > + u16 fifo_clr_reg;
> > u16 restart_flag = 0;
> > u32 reg_4g_mode;
> > u8 *dma_rd_buf = NULL;
> > @@ -521,7 +628,15 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
> > mtk_i2c_writew(i2c, restart_flag | I2C_HS_NACKERR | I2C_ACKERR |
> > I2C_TRANSAC_COMP, OFFSET_INTR_STAT);
> >
> > - mtk_i2c_writew(i2c, I2C_FIFO_ADDR_CLR, OFFSET_FIFO_ADDR_CLR);
>
> There's a missing initialization to fifo_clr_reg here, I guess
> fifo_clr_reg = I2C_FIFO_ADDR_CLR should be necessarily made here;
>
> > + if (i2c->share_i3c)
> > + fifo_clr_reg = I2C_FIFO_ADDR_CLR | I2C_FIFO_ADDR_CLRH;
>
> fifo_clr_reg |= I2C_FIFO_ADDR_CLRH baed on initialized value
>
> > + if (i2c->ch_offset)
> > + fifo_clr_reg = I2C_FIFO_ADDR_CLR | I2C_FIFO_ADDR_CLR_MCH;
>
> and then fifo_clr_reg |= I2C_FIFO_ADDR_CLR_MCH;
>

ok, I will modify it. Thanks for your patient review.

> > +
> > + mtk_i2c_writew(i2c, fifo_clr_reg, OFFSET_FIFO_ADDR_CLR);
> > +
> > + if ((i2c->speed_hz > MAX_FS_MODE_SPEED) && i2c->share_i3c)
> > + mtk_i2c_writew(i2c, I2C_HFIFO_DATA, OFFSET_HFIFO_DATA);
> >
> > /* Enable interrupt */
> > mtk_i2c_writew(i2c, restart_flag | I2C_HS_NACKERR | I2C_ACKERR |
> > @@ -817,6 +932,11 @@ static int mtk_i2c_parse_dt(struct device_node *np, struct mtk_i2c *i2c)
> > if (i2c->clk_src_div == 0)
> > return -EINVAL;
> >
> > + ret = of_property_read_u32(np, "ch-offset", &i2c->ch_offset);
>
> if ch-offset is a vendor-specific property, it should be better to add
> a vendor prefix
>

ok, I will add a vendor-specific property if we need the ch-offset.

> > + if (ret < 0)
> > + i2c->ch_offset = 0;
> > +
> > + i2c->share_i3c = of_property_read_bool(np, "mediatek,share-i3c");
> > i2c->have_pmic = of_property_read_bool(np, "mediatek,have-pmic");
> > i2c->use_push_pull =
> > of_property_read_bool(np, "mediatek,use-push-pull");
> > @@ -884,6 +1004,10 @@ static int mtk_i2c_probe(struct platform_device *pdev)
> > return PTR_ERR(i2c->clk_dma);
> > }
> >
> > + i2c->clk_arb = devm_clk_get(&pdev->dev, "arb");
> > + if (IS_ERR(i2c->clk_arb))
> > + i2c->clk_arb = NULL;
> > +
> > clk = i2c->clk_main;
> > if (i2c->have_pmic) {
> > i2c->clk_pmic = devm_clk_get(&pdev->dev, "pmic");
> > --
> > 1.7.9.5
> >
> >
> > _______________________________________________
> > Linux-mediatek mailing list
> > Linux-mediatek@xxxxxxxxxxxxxxxxxxx
> > http://lists.infradead.org/mailman/listinfo/linux-mediatek

Next message: Christophe Leroy: "Re: [PATCH v3] powerpc: implement CONFIG_DEBUG_VIRTUAL"
Previous message: Greg Kroah-Hartman: "Re: [PATCH 4.19 051/118] flexfiles: use per-mirror specified stateid for IO"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]