Re: [PATCH] ARM: dts: omap5: Add l4 interconnect hierarchy and ti-sysc data

From: Peter Ujfalusi
Date: Wed Dec 12 2018 - 05:11:46 EST

Next message: Chao Yu: "[PATCH 1/3] f2fs: fix to reorder set_page_dirty and wait_on_page_writeback"
Previous message: Jan Kara: "Re: [PATCH 2/3] filemap: pass vm_fault to the mmap ra helpers"
Next in thread: Peter Ujfalusi: "Re: [PATCH] ARM: dts: omap5: Add l4 interconnect hierarchy and ti-sysc data"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Tony,

On 16/11/2018 0.45, Tony Lindgren wrote:
> Similar to commit 8f42cb7f64c7 ("ARM: dts: omap4: Add l4 interconnect
> hierarchy and ti-sysc data"), let's add proper interconnect hierarchy
> for l4 interconnect instances with the related ti-sysc interconnect
> module data as in Documentation/devicetree/bindings/bus/ti-sysc.txt.
>
> Using ti-sysc driver binding allows us to start dropping legacy platform
> data in arch/arm/mach-omap2/omap*hwmod*data.c files later on in favor of
> ti-sysc dts data.
>
> This data is generated based on platform data from a booted system
> and the interconnect acces protection registers for ranges. To avoid
> regressions, we initially validate the device tree provided data
> against the existing platform data on boot.

Reverting this patch in linux-next-20181210 will make the ethernet
working again.

bootlog w/ revert: https://pastebin.com/dpRk1xWv
bootlog w/o revert: https://pastebin.com/PWrBttxd

>
> Cc: devicetree@xxxxxxxxxxxxxxx
> Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
> ---
> arch/arm/boot/dts/omap5-l4.dtsi | 2462 +++++++++++++++++++++++++++++++
> arch/arm/boot/dts/omap5.dtsi | 688 +--------
> 2 files changed, 2468 insertions(+), 682 deletions(-)
> create mode 100644 arch/arm/boot/dts/omap5-l4.dtsi
>
> diff --git a/arch/arm/boot/dts/omap5-l4.dtsi b/arch/arm/boot/dts/omap5-l4.dtsi
> new file mode 100644
> --- /dev/null
> +++ b/arch/arm/boot/dts/omap5-l4.dtsi
> @@ -0,0 +1,2462 @@
> +&l4_cfg { /* 0x4a000000 */
> + compatible = "ti,omap5-l4-cfg", "simple-bus";
> + reg = <0x4a000000 0x800>,
> + <0x4a000800 0x800>,
> + <0x4a001000 0x1000>;
> + reg-names = "ap", "la", "ia0";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x00000000 0x4a000000 0x080000>, /* segment 0 */
> + <0x00080000 0x4a080000 0x080000>, /* segment 1 */
> + <0x00100000 0x4a100000 0x080000>, /* segment 2 */
> + <0x00180000 0x4a180000 0x080000>, /* segment 3 */
> + <0x00200000 0x4a200000 0x080000>, /* segment 4 */
> + <0x00280000 0x4a280000 0x080000>, /* segment 5 */
> + <0x00300000 0x4a300000 0x080000>; /* segment 6 */
> +
> + segment@0 { /* 0x4a000000 */
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
> + <0x00001000 0x00001000 0x001000>, /* ap 1 */
> + <0x00000800 0x00000800 0x000800>, /* ap 2 */
> + <0x00002000 0x00002000 0x001000>, /* ap 3 */
> + <0x00003000 0x00003000 0x001000>, /* ap 4 */
> + <0x00004000 0x00004000 0x001000>, /* ap 5 */
> + <0x00005000 0x00005000 0x001000>, /* ap 6 */
> + <0x00056000 0x00056000 0x001000>, /* ap 7 */
> + <0x00057000 0x00057000 0x001000>, /* ap 8 */
> + <0x0005c000 0x0005c000 0x001000>, /* ap 9 */
> + <0x00058000 0x00058000 0x001000>, /* ap 10 */
> + <0x00062000 0x00062000 0x001000>, /* ap 11 */
> + <0x00063000 0x00063000 0x001000>, /* ap 12 */
> + <0x00008000 0x00008000 0x002000>, /* ap 21 */
> + <0x0000a000 0x0000a000 0x001000>, /* ap 22 */
> + <0x00066000 0x00066000 0x001000>, /* ap 23 */
> + <0x00067000 0x00067000 0x001000>, /* ap 24 */
> + <0x0005e000 0x0005e000 0x002000>, /* ap 69 */
> + <0x00060000 0x00060000 0x001000>, /* ap 70 */
> + <0x00064000 0x00064000 0x001000>, /* ap 71 */
> + <0x00065000 0x00065000 0x001000>, /* ap 72 */
> + <0x0005a000 0x0005a000 0x001000>, /* ap 77 */
> + <0x0005b000 0x0005b000 0x001000>, /* ap 78 */
> + <0x00070000 0x00070000 0x004000>, /* ap 79 */
> + <0x00074000 0x00074000 0x001000>, /* ap 80 */
> + <0x00075000 0x00075000 0x001000>, /* ap 81 */
> + <0x00076000 0x00076000 0x001000>, /* ap 82 */
> + <0x00020000 0x00020000 0x020000>, /* ap 109 */
> + <0x00040000 0x00040000 0x001000>, /* ap 110 */
> + <0x00059000 0x00059000 0x001000>; /* ap 111 */
> +
> + target-module@2000 { /* 0x4a002000, ap 3 44.0 */
> + compatible = "ti,sysc-omap4", "ti,sysc";
> + reg = <0x2000 0x4>;
> + reg-names = "rev";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x2000 0x1000>;
> +
> + scm_core: scm@0 {
> + compatible = "ti,omap5-scm-core", "simple-bus";
> + reg = <0x0 0x1000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0 0x800>;
> +
> + scm_conf: scm_conf@0 {
> + compatible = "syscon";
> + reg = <0x0 0x800>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + };
> + };
> +
> + scm_padconf_core: scm@800 {
> + compatible = "ti,omap5-scm-padconf-core",
> + "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0x800 0x800>;
> +
> + omap5_pmx_core: pinmux@40 {
> + compatible = "ti,omap5-padconf",
> + "pinctrl-single";
> + reg = <0x40 0x01b6>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #pinctrl-cells = <1>;
> + #interrupt-cells = <1>;
> + interrupt-controller;
> + pinctrl-single,register-width = <16>;
> + pinctrl-single,function-mask = <0x7fff>;
> + };
> +
> + omap5_padconf_global: omap5_padconf_global@5a0 {
> + compatible = "syscon",
> + "simple-bus";
> + reg = <0x5a0 0xec>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0x5a0 0xec>;
> +
> + pbias_regulator: pbias_regulator@60 {
> + compatible = "ti,pbias-omap5", "ti,pbias-omap";
> + reg = <0x60 0x4>;
> + syscon = <&omap5_padconf_global>;
> + pbias_mmc_reg: pbias_mmc_omap5 {
> + regulator-name = "pbias_mmc_omap5";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + };
> + };
> + };
> + };
> + };
> +
> + target-module@4000 { /* 0x4a004000, ap 5 5c.0 */
> + compatible = "ti,sysc-omap4", "ti,sysc";
> + reg = <0x4000 0x4>;
> + reg-names = "rev";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x4000 0x1000>;
> +
> + cm_core_aon: cm_core_aon@0 {
> + compatible = "ti,omap5-cm-core-aon",
> + "simple-bus";
> + reg = <0x0 0x2000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0 0x1000>;
> +
> + cm_core_aon_clocks: clocks {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + cm_core_aon_clockdomains: clockdomains {
> + };
> + };
> + };
> +
> + target-module@8000 { /* 0x4a008000, ap 21 4c.0 */
> + compatible = "ti,sysc-omap4", "ti,sysc";
> + reg = <0x8000 0x4>;
> + reg-names = "rev";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x8000 0x2000>;
> +
> + cm_core: cm_core@0 {
> + compatible = "ti,omap5-cm-core", "simple-bus";
> + reg = <0x0 0x2000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0 0x2000>;
> +
> + cm_core_clocks: clocks {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + cm_core_clockdomains: clockdomains {
> + };
> + };
> + };
> +
> + target-module@20000 { /* 0x4a020000, ap 109 08.0 */
> + compatible = "ti,sysc-omap4", "ti,sysc";
> + ti,hwmods = "usb_otg_ss";
> + reg = <0x20000 0x4>,
> + <0x20010 0x4>;
> + reg-names = "rev", "sysc";
> + ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
> + ti,sysc-midle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>,
> + <SYSC_IDLE_SMART_WKUP>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>,
> + <SYSC_IDLE_SMART_WKUP>;
> + /* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */
> + clocks = <&l3init_clkctrl OMAP5_USB_OTG_SS_CLKCTRL 0>;
> + clock-names = "fck";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x20000 0x20000>;
> +
> + usb3: omap_dwc3@0 {
> + compatible = "ti,dwc3";
> + reg = <0x0 0x10000>;
> + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + utmi-mode = <2>;
> + ranges = <0 0 0x20000>;
> + dwc3: dwc3@4a030000 {
> + compatible = "snps,dwc3";
> + reg = <0x10000 0x10000>;
> + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "peripheral",
> + "host",
> + "otg";
> + phys = <&usb2_phy>, <&usb3_phy>;
> + phy-names = "usb2-phy", "usb3-phy";
> + dr_mode = "peripheral";
> + };
> + };
> + };
> +
> + target-module@56000 { /* 0x4a056000, ap 7 02.0 */
> + compatible = "ti,sysc-omap2", "ti,sysc";
> + ti,hwmods = "dma_system";
> + reg = <0x56000 0x4>,
> + <0x5602c 0x4>,
> + <0x56028 0x4>;
> + reg-names = "rev", "sysc", "syss";
> + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
> + SYSC_OMAP2_EMUFREE |
> + SYSC_OMAP2_SOFTRESET |
> + SYSC_OMAP2_AUTOIDLE)>;
> + ti,sysc-midle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>;
> + ti,syss-mask = <1>;
> + /* Domains (V, P, C): core, core_pwrdm, dma_clkdm */
> + clocks = <&dma_clkctrl OMAP5_DMA_SYSTEM_CLKCTRL 0>;
> + clock-names = "fck";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x56000 0x1000>;
> +
> + sdma: dma-controller@0 {
> + compatible = "ti,omap4430-sdma";
> + reg = <0x0 0x1000>;
> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
> + #dma-cells = <1>;
> + dma-channels = <32>;
> + dma-requests = <127>;
> + };
> + };
> +
> + target-module@58000 { /* 0x4a058000, ap 10 06.0 */
> + compatible = "ti,sysc";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x00000000 0x00058000 0x00001000>,
> + <0x00001000 0x00059000 0x00001000>,
> + <0x00002000 0x0005a000 0x00001000>,
> + <0x00003000 0x0005b000 0x00001000>;
> + };
> +
> + target-module@5e000 { /* 0x4a05e000, ap 69 2a.0 */
> + compatible = "ti,sysc";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x5e000 0x2000>;
> + };
> +
> + target-module@62000 { /* 0x4a062000, ap 11 0e.0 */
> + compatible = "ti,sysc-omap2", "ti,sysc";
> + ti,hwmods = "usb_tll_hs";
> + reg = <0x62000 0x4>,
> + <0x62010 0x4>,
> + <0x62014 0x4>;
> + reg-names = "rev", "sysc", "syss";
> + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
> + SYSC_OMAP2_ENAWAKEUP |
> + SYSC_OMAP2_SOFTRESET |
> + SYSC_OMAP2_AUTOIDLE)>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>;
> + ti,syss-mask = <1>;
> + /* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */
> + clocks = <&l3init_clkctrl OMAP5_USB_TLL_HS_CLKCTRL 0>;
> + clock-names = "fck";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x62000 0x1000>;
> +
> + usbhstll: usbhstll@0 {
> + compatible = "ti,usbhs-tll";
> + reg = <0x0 0x1000>;
> + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
> + };
> + };
> +
> + target-module@64000 { /* 0x4a064000, ap 71 1e.0 */
> + compatible = "ti,sysc-omap4", "ti,sysc";
> + ti,hwmods = "usb_host_hs";
> + reg = <0x64000 0x4>,
> + <0x64010 0x4>;
> + reg-names = "rev", "sysc";
> + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
> + ti,sysc-midle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>,
> + <SYSC_IDLE_SMART_WKUP>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>,
> + <SYSC_IDLE_SMART_WKUP>;
> + /* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */
> + clocks = <&l3init_clkctrl OMAP5_USB_HOST_HS_CLKCTRL 0>;
> + clock-names = "fck";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x64000 0x1000>;
> +
> + usbhshost: usbhshost@0 {
> + compatible = "ti,usbhs-host";
> + reg = <0x0 0x800>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0 0x1000>;
> + clocks = <&l3init_60m_fclk>,
> + <&xclk60mhsp1_ck>,
> + <&xclk60mhsp2_ck>;
> + clock-names = "refclk_60m_int",
> + "refclk_60m_ext_p1",
> + "refclk_60m_ext_p2";
> +
> + usbhsohci: ohci@4a064800 {
> + compatible = "ti,ohci-omap3";
> + reg = <0x800 0x400>;
> + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
> + remote-wakeup-connected;
> + };
> +
> + usbhsehci: ehci@4a064c00 {
> + compatible = "ti,ehci-omap";
> + reg = <0xc00 0x400>;
> + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
> + };
> + };
> + };
> +
> + target-module@66000 { /* 0x4a066000, ap 23 0a.0 */
> + compatible = "ti,sysc-omap2", "ti,sysc";
> + ti,hwmods = "mmu_dsp";
> + reg = <0x66000 0x4>,
> + <0x66010 0x4>,
> + <0x66014 0x4>;
> + reg-names = "rev", "sysc", "syss";
> + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
> + SYSC_OMAP2_SOFTRESET |
> + SYSC_OMAP2_AUTOIDLE)>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>;
> + ti,syss-mask = <1>;
> + /* Domains (V, P, C): mm, dsp_pwrdm, dsp_clkdm */
> + clocks = <&dsp_clkctrl OMAP5_MMU_DSP_CLKCTRL 0>;
> + clock-names = "fck";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x66000 0x1000>;
> +
> + /* mmu_dsp cannot be moved before reset driver */
> + status = "disabled";
> + };
> +
> + target-module@70000 { /* 0x4a070000, ap 79 2e.0 */
> + compatible = "ti,sysc";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x70000 0x4000>;
> + };
> +
> + target-module@75000 { /* 0x4a075000, ap 81 32.0 */
> + compatible = "ti,sysc";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x75000 0x1000>;
> + };
> + };
> +
> + segment@80000 { /* 0x4a080000 */
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x00059000 0x000d9000 0x001000>, /* ap 13 */
> + <0x0005a000 0x000da000 0x001000>, /* ap 14 */
> + <0x0005b000 0x000db000 0x001000>, /* ap 15 */
> + <0x0005c000 0x000dc000 0x001000>, /* ap 16 */
> + <0x0005d000 0x000dd000 0x001000>, /* ap 17 */
> + <0x0005e000 0x000de000 0x001000>, /* ap 18 */
> + <0x00060000 0x000e0000 0x001000>, /* ap 19 */
> + <0x00061000 0x000e1000 0x001000>, /* ap 20 */
> + <0x00074000 0x000f4000 0x001000>, /* ap 25 */
> + <0x00075000 0x000f5000 0x001000>, /* ap 26 */
> + <0x00076000 0x000f6000 0x001000>, /* ap 27 */
> + <0x00077000 0x000f7000 0x001000>, /* ap 28 */
> + <0x00036000 0x000b6000 0x001000>, /* ap 65 */
> + <0x00037000 0x000b7000 0x001000>, /* ap 66 */
> + <0x0004d000 0x000cd000 0x001000>, /* ap 67 */
> + <0x0004e000 0x000ce000 0x001000>, /* ap 68 */
> + <0x00000000 0x00080000 0x004000>, /* ap 83 */
> + <0x00004000 0x00084000 0x001000>, /* ap 84 */
> + <0x00005000 0x00085000 0x001000>, /* ap 85 */
> + <0x00006000 0x00086000 0x001000>, /* ap 86 */
> + <0x00007000 0x00087000 0x001000>, /* ap 87 */
> + <0x00008000 0x00088000 0x001000>, /* ap 88 */
> + <0x00010000 0x00090000 0x004000>, /* ap 89 */
> + <0x00014000 0x00094000 0x001000>, /* ap 90 */
> + <0x00015000 0x00095000 0x001000>, /* ap 91 */
> + <0x00016000 0x00096000 0x001000>, /* ap 92 */
> + <0x00017000 0x00097000 0x001000>, /* ap 93 */
> + <0x00018000 0x00098000 0x001000>, /* ap 94 */
> + <0x00020000 0x000a0000 0x004000>, /* ap 95 */
> + <0x00024000 0x000a4000 0x001000>, /* ap 96 */
> + <0x00025000 0x000a5000 0x001000>, /* ap 97 */
> + <0x00026000 0x000a6000 0x001000>, /* ap 98 */
> + <0x00027000 0x000a7000 0x001000>, /* ap 99 */
> + <0x00028000 0x000a8000 0x001000>; /* ap 100 */
> +
> + target-module@0 { /* 0x4a080000, ap 83 28.0 */
> + compatible = "ti,sysc-omap2", "ti,sysc";
> + ti,hwmods = "ocp2scp1";
> + reg = <0x0 0x4>,
> + <0x10 0x4>,
> + <0x14 0x4>;
> + reg-names = "rev", "sysc", "syss";
> + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
> + SYSC_OMAP2_AUTOIDLE)>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>;
> + ti,syss-mask = <1>;
> + /* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */
> + clocks = <&l3init_clkctrl OMAP5_OCP2SCP1_CLKCTRL 0>;
> + clock-names = "fck";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x00000000 0x00000000 0x00004000>,
> + <0x00004000 0x00004000 0x00001000>,
> + <0x00005000 0x00005000 0x00001000>,
> + <0x00006000 0x00006000 0x00001000>,
> + <0x00007000 0x00007000 0x00001000>;
> +
> + ocp2scp@0 {
> + compatible = "ti,omap-ocp2scp";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0 0x20>;
> + };
> +
> + usb2_phy: usb2phy@4000 {
> + compatible = "ti,omap-usb2";
> + reg = <0x4000 0x7c>;
> + syscon-phy-power = <&scm_conf 0x300>;
> + clocks = <&usb_phy_cm_clk32k>,
> + <&l3init_clkctrl OMAP5_USB_OTG_SS_CLKCTRL 8>;
> + clock-names = "wkupclk", "refclk";
> + #phy-cells = <0>;
> + };
> +
> + usb3_phy: usb3phy@4400 {
> + compatible = "ti,omap-usb3";
> + reg = <0x4400 0x80>,
> + <0x4800 0x64>,
> + <0x4c00 0x40>;
> + reg-names = "phy_rx", "phy_tx", "pll_ctrl";
> + syscon-phy-power = <&scm_conf 0x370>;
> + clocks = <&usb_phy_cm_clk32k>,
> + <&sys_clkin>,
> + <&l3init_clkctrl OMAP5_USB_OTG_SS_CLKCTRL 8>;
> + clock-names = "wkupclk",
> + "sysclk",
> + "refclk";
> + #phy-cells = <0>;
> + };
> + };
> +
> + target-module@10000 { /* 0x4a090000, ap 89 36.0 */
> + compatible = "ti,sysc-omap2", "ti,sysc";
> + ti,hwmods = "ocp2scp3";
> + reg = <0x10000 0x4>,
> + <0x10010 0x4>,
> + <0x10014 0x4>;
> + reg-names = "rev", "sysc", "syss";
> + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
> + SYSC_OMAP2_AUTOIDLE)>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>;
> + ti,syss-mask = <1>;
> + /* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */
> + clocks = <&l3init_clkctrl OMAP5_OCP2SCP3_CLKCTRL 0>;
> + clock-names = "fck";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x00000000 0x00010000 0x00004000>,
> + <0x00004000 0x00014000 0x00001000>,
> + <0x00005000 0x00015000 0x00001000>,
> + <0x00006000 0x00016000 0x00001000>,
> + <0x00007000 0x00017000 0x00001000>;
> +
> + ocp2scp@0 {
> + compatible = "ti,omap-ocp2scp";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0x0 0x20>;
> + ranges = <0 0 0x4000>;
> + sata_phy: phy@4a096000 {
> + compatible = "ti,phy-pipe3-sata";
> + reg = <0x6000 0x80>, /* phy_rx */
> + <0x4A096400 0x64>, /* phy_tx */
> + <0x4A096800 0x40>; /* pll_ctrl */
> + reg-names = "phy_rx", "phy_tx", "pll_ctrl";
> + syscon-phy-power = <&scm_conf 0x374>;
> + clocks = <&sys_clkin>,
> + <&l3init_clkctrl OMAP5_SATA_CLKCTRL 8>;
> + clock-names = "sysclk", "refclk";
> + #phy-cells = <0>;
> + };
> + };
> + };
> +
> + target-module@20000 { /* 0x4a0a0000, ap 95 50.0 */
> + compatible = "ti,sysc";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x00000000 0x00020000 0x00004000>,
> + <0x00004000 0x00024000 0x00001000>,
> + <0x00005000 0x00025000 0x00001000>,
> + <0x00006000 0x00026000 0x00001000>,
> + <0x00007000 0x00027000 0x00001000>;
> + };
> +
> + target-module@36000 { /* 0x4a0b6000, ap 65 6c.0 */
> + compatible = "ti,sysc";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x36000 0x1000>;
> + };
> +
> + target-module@4d000 { /* 0x4a0cd000, ap 67 64.0 */
> + compatible = "ti,sysc";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x4d000 0x1000>;
> + };
> +
> + target-module@59000 { /* 0x4a0d9000, ap 13 20.0 */
> + compatible = "ti,sysc";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x59000 0x1000>;
> + };
> +
> + target-module@5b000 { /* 0x4a0db000, ap 15 10.0 */
> + compatible = "ti,sysc";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x5b000 0x1000>;
> + };
> +
> + target-module@5d000 { /* 0x4a0dd000, ap 17 18.0 */
> + compatible = "ti,sysc";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x5d000 0x1000>;
> + };
> +
> + target-module@60000 { /* 0x4a0e0000, ap 19 54.0 */
> + compatible = "ti,sysc";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x60000 0x1000>;
> + };
> +
> + target-module@74000 { /* 0x4a0f4000, ap 25 04.0 */
> + compatible = "ti,sysc-omap4", "ti,sysc";
> + ti,hwmods = "mailbox";
> + reg = <0x74000 0x4>,
> + <0x74010 0x4>;
> + reg-names = "rev", "sysc";
> + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>;
> + /* Domains (V, P, C): core, core_pwrdm, l4cfg_clkdm */
> + clocks = <&l4cfg_clkctrl OMAP5_MAILBOX_CLKCTRL 0>;
> + clock-names = "fck";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x74000 0x1000>;
> +
> + mailbox: mailbox@0 {
> + compatible = "ti,omap4-mailbox";
> + reg = <0x0 0x200>;
> + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
> + #mbox-cells = <1>;
> + ti,mbox-num-users = <3>;
> + ti,mbox-num-fifos = <8>;
> + mbox_ipu: mbox_ipu {
> + ti,mbox-tx = <0 0 0>;
> + ti,mbox-rx = <1 0 0>;
> + };
> + mbox_dsp: mbox_dsp {
> + ti,mbox-tx = <3 0 0>;
> + ti,mbox-rx = <2 0 0>;
> + };
> + };
> + };
> +
> + target-module@76000 { /* 0x4a0f6000, ap 27 0c.0 */
> + compatible = "ti,sysc-omap2", "ti,sysc";
> + ti,hwmods = "spinlock";
> + reg = <0x76000 0x4>,
> + <0x76010 0x4>,
> + <0x76014 0x4>;
> + reg-names = "rev", "sysc", "syss";
> + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
> + SYSC_OMAP2_ENAWAKEUP |
> + SYSC_OMAP2_SOFTRESET |
> + SYSC_OMAP2_AUTOIDLE)>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>;
> + ti,syss-mask = <1>;
> + /* Domains (V, P, C): core, core_pwrdm, l4cfg_clkdm */
> + clocks = <&l4cfg_clkctrl OMAP5_SPINLOCK_CLKCTRL 0>;
> + clock-names = "fck";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x76000 0x1000>;
> +
> + hwspinlock: spinlock@0 {
> + compatible = "ti,omap4-hwspinlock";
> + reg = <0x0 0x1000>;
> + #hwlock-cells = <1>;
> + };
> + };
> + };
> +
> + segment@100000 { /* 0x4a100000 */
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x00002000 0x00102000 0x001000>, /* ap 59 */
> + <0x00003000 0x00103000 0x001000>, /* ap 60 */
> + <0x00008000 0x00108000 0x001000>, /* ap 61 */
> + <0x00009000 0x00109000 0x001000>, /* ap 62 */
> + <0x0000a000 0x0010a000 0x001000>, /* ap 63 */
> + <0x0000b000 0x0010b000 0x001000>, /* ap 64 */
> + <0x00040000 0x00140000 0x010000>, /* ap 101 */
> + <0x00050000 0x00150000 0x001000>; /* ap 102 */
> +
> + target-module@2000 { /* 0x4a102000, ap 59 2c.0 */
> + compatible = "ti,sysc";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x2000 0x1000>;
> + };
> +
> + target-module@8000 { /* 0x4a108000, ap 61 26.0 */
> + compatible = "ti,sysc";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x8000 0x1000>;
> + };
> +
> + target-module@a000 { /* 0x4a10a000, ap 63 22.0 */
> + compatible = "ti,sysc";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0xa000 0x1000>;
> + };
> +
> + target-module@40000 { /* 0x4a140000, ap 101 16.0 */
> + compatible = "ti,sysc";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x40000 0x10000>;
> + };
> + };
> +
> + segment@180000 { /* 0x4a180000 */
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + };
> +
> + segment@200000 { /* 0x4a200000 */
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0001e000 0x0021e000 0x001000>, /* ap 29 */
> + <0x0001f000 0x0021f000 0x001000>, /* ap 30 */
> + <0x0000a000 0x0020a000 0x001000>, /* ap 31 */
> + <0x0000b000 0x0020b000 0x001000>, /* ap 32 */
> + <0x00006000 0x00206000 0x001000>, /* ap 33 */
> + <0x00007000 0x00207000 0x001000>, /* ap 34 */
> + <0x00004000 0x00204000 0x001000>, /* ap 35 */
> + <0x00005000 0x00205000 0x001000>, /* ap 36 */
> + <0x00012000 0x00212000 0x001000>, /* ap 37 */
> + <0x00013000 0x00213000 0x001000>, /* ap 38 */
> + <0x0000c000 0x0020c000 0x001000>, /* ap 39 */
> + <0x0000d000 0x0020d000 0x001000>, /* ap 40 */
> + <0x00010000 0x00210000 0x001000>, /* ap 41 */
> + <0x00011000 0x00211000 0x001000>, /* ap 42 */
> + <0x00016000 0x00216000 0x001000>, /* ap 43 */
> + <0x00017000 0x00217000 0x001000>, /* ap 44 */
> + <0x00014000 0x00214000 0x001000>, /* ap 45 */
> + <0x00015000 0x00215000 0x001000>, /* ap 46 */
> + <0x00018000 0x00218000 0x001000>, /* ap 47 */
> + <0x00019000 0x00219000 0x001000>, /* ap 48 */
> + <0x00020000 0x00220000 0x001000>, /* ap 49 */
> + <0x00021000 0x00221000 0x001000>, /* ap 50 */
> + <0x00026000 0x00226000 0x001000>, /* ap 51 */
> + <0x00027000 0x00227000 0x001000>, /* ap 52 */
> + <0x00028000 0x00228000 0x001000>, /* ap 53 */
> + <0x00029000 0x00229000 0x001000>, /* ap 54 */
> + <0x0002a000 0x0022a000 0x001000>, /* ap 55 */
> + <0x0002b000 0x0022b000 0x001000>, /* ap 56 */
> + <0x0001c000 0x0021c000 0x001000>, /* ap 57 */
> + <0x0001d000 0x0021d000 0x001000>, /* ap 58 */
> + <0x0001a000 0x0021a000 0x001000>, /* ap 73 */
> + <0x0001b000 0x0021b000 0x001000>, /* ap 74 */
> + <0x00024000 0x00224000 0x001000>, /* ap 75 */
> + <0x00025000 0x00225000 0x001000>, /* ap 76 */
> + <0x00002000 0x00202000 0x001000>, /* ap 103 */
> + <0x00003000 0x00203000 0x001000>, /* ap 104 */
> + <0x00008000 0x00208000 0x001000>, /* ap 105 */
> + <0x00009000 0x00209000 0x001000>, /* ap 106 */
> + <0x00022000 0x00222000 0x001000>, /* ap 107 */
> + <0x00023000 0x00223000 0x001000>; /* ap 108 */
> +
> + target-module@2000 { /* 0x4a202000, ap 103 3c.0 */
> + compatible = "ti,sysc";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x2000 0x1000>;
> + };
> +
> + target-module@4000 { /* 0x4a204000, ap 35 46.0 */
> + compatible = "ti,sysc";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x4000 0x1000>;
> + };
> +
> + target-module@6000 { /* 0x4a206000, ap 33 4e.0 */
> + compatible = "ti,sysc";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x6000 0x1000>;
> + };
> +
> + target-module@8000 { /* 0x4a208000, ap 105 34.0 */
> + compatible = "ti,sysc";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x8000 0x1000>;
> + };
> +
> + target-module@a000 { /* 0x4a20a000, ap 31 30.0 */
> + compatible = "ti,sysc";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0xa000 0x1000>;
> + };
> +
> + target-module@c000 { /* 0x4a20c000, ap 39 14.0 */
> + compatible = "ti,sysc";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0xc000 0x1000>;
> + };
> +
> + target-module@10000 { /* 0x4a210000, ap 41 56.0 */
> + compatible = "ti,sysc";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x10000 0x1000>;
> + };
> +
> + target-module@12000 { /* 0x4a212000, ap 37 52.0 */
> + compatible = "ti,sysc";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x12000 0x1000>;
> + };
> +
> + target-module@14000 { /* 0x4a214000, ap 45 1c.0 */
> + compatible = "ti,sysc";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x14000 0x1000>;
> + };
> +
> + target-module@16000 { /* 0x4a216000, ap 43 42.0 */
> + compatible = "ti,sysc";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x16000 0x1000>;
> + };
> +
> + target-module@18000 { /* 0x4a218000, ap 47 1a.0 */
> + compatible = "ti,sysc";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x18000 0x1000>;
> + };
> +
> + target-module@1a000 { /* 0x4a21a000, ap 73 3e.0 */
> + compatible = "ti,sysc";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x1a000 0x1000>;
> + };
> +
> + target-module@1c000 { /* 0x4a21c000, ap 57 40.0 */
> + compatible = "ti,sysc";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x1c000 0x1000>;
> + };
> +
> + target-module@1e000 { /* 0x4a21e000, ap 29 12.0 */
> + compatible = "ti,sysc";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x1e000 0x1000>;
> + };
> +
> + target-module@20000 { /* 0x4a220000, ap 49 4a.0 */
> + compatible = "ti,sysc";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x20000 0x1000>;
> + };
> +
> + target-module@22000 { /* 0x4a222000, ap 107 3a.0 */
> + compatible = "ti,sysc";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x22000 0x1000>;
> + };
> +
> + target-module@24000 { /* 0x4a224000, ap 75 48.0 */
> + compatible = "ti,sysc";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x24000 0x1000>;
> + };
> +
> + target-module@26000 { /* 0x4a226000, ap 51 24.0 */
> + compatible = "ti,sysc";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x26000 0x1000>;
> + };
> +
> + target-module@28000 { /* 0x4a228000, ap 53 38.0 */
> + compatible = "ti,sysc";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x28000 0x1000>;
> + };
> +
> + target-module@2a000 { /* 0x4a22a000, ap 55 5a.0 */
> + compatible = "ti,sysc";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x2a000 0x1000>;
> + };
> + };
> +
> + segment@280000 { /* 0x4a280000 */
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + };
> +
> + segment@300000 { /* 0x4a300000 */
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + };
> +};
> +
> +&l4_per { /* 0x48000000 */
> + compatible = "ti,omap5-l4-per", "simple-bus";
> + reg = <0x48000000 0x800>,
> + <0x48000800 0x800>,
> + <0x48001000 0x400>,
> + <0x48001400 0x400>,
> + <0x48001800 0x400>,
> + <0x48001c00 0x400>;
> + reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x00000000 0x48000000 0x200000>, /* segment 0 */
> + <0x00200000 0x48200000 0x200000>; /* segment 1 */
> +
> + segment@0 { /* 0x48000000 */
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
> + <0x00001000 0x00001000 0x000400>, /* ap 1 */
> + <0x00000800 0x00000800 0x000800>, /* ap 2 */
> + <0x00020000 0x00020000 0x001000>, /* ap 3 */
> + <0x00021000 0x00021000 0x001000>, /* ap 4 */
> + <0x00032000 0x00032000 0x001000>, /* ap 5 */
> + <0x00033000 0x00033000 0x001000>, /* ap 6 */
> + <0x00034000 0x00034000 0x001000>, /* ap 7 */
> + <0x00035000 0x00035000 0x001000>, /* ap 8 */
> + <0x00036000 0x00036000 0x001000>, /* ap 9 */
> + <0x00037000 0x00037000 0x001000>, /* ap 10 */
> + <0x0003e000 0x0003e000 0x001000>, /* ap 11 */
> + <0x0003f000 0x0003f000 0x001000>, /* ap 12 */
> + <0x00055000 0x00055000 0x001000>, /* ap 13 */
> + <0x00056000 0x00056000 0x001000>, /* ap 14 */
> + <0x00057000 0x00057000 0x001000>, /* ap 15 */
> + <0x00058000 0x00058000 0x001000>, /* ap 16 */
> + <0x00059000 0x00059000 0x001000>, /* ap 17 */
> + <0x0005a000 0x0005a000 0x001000>, /* ap 18 */
> + <0x0005b000 0x0005b000 0x001000>, /* ap 19 */
> + <0x0005c000 0x0005c000 0x001000>, /* ap 20 */
> + <0x0005d000 0x0005d000 0x001000>, /* ap 21 */
> + <0x0005e000 0x0005e000 0x001000>, /* ap 22 */
> + <0x00060000 0x00060000 0x001000>, /* ap 23 */
> + <0x0006a000 0x0006a000 0x001000>, /* ap 24 */
> + <0x0006b000 0x0006b000 0x001000>, /* ap 25 */
> + <0x0006c000 0x0006c000 0x001000>, /* ap 26 */
> + <0x0006d000 0x0006d000 0x001000>, /* ap 27 */
> + <0x0006e000 0x0006e000 0x001000>, /* ap 28 */
> + <0x0006f000 0x0006f000 0x001000>, /* ap 29 */
> + <0x00070000 0x00070000 0x001000>, /* ap 30 */
> + <0x00071000 0x00071000 0x001000>, /* ap 31 */
> + <0x00072000 0x00072000 0x001000>, /* ap 32 */
> + <0x00073000 0x00073000 0x001000>, /* ap 33 */
> + <0x00061000 0x00061000 0x001000>, /* ap 34 */
> + <0x00053000 0x00053000 0x001000>, /* ap 35 */
> + <0x00054000 0x00054000 0x001000>, /* ap 36 */
> + <0x000b2000 0x000b2000 0x001000>, /* ap 37 */
> + <0x000b3000 0x000b3000 0x001000>, /* ap 38 */
> + <0x00078000 0x00078000 0x001000>, /* ap 39 */
> + <0x00079000 0x00079000 0x001000>, /* ap 40 */
> + <0x00086000 0x00086000 0x001000>, /* ap 41 */
> + <0x00087000 0x00087000 0x001000>, /* ap 42 */
> + <0x00088000 0x00088000 0x001000>, /* ap 43 */
> + <0x00089000 0x00089000 0x001000>, /* ap 44 */
> + <0x00051000 0x00051000 0x001000>, /* ap 45 */
> + <0x00052000 0x00052000 0x001000>, /* ap 46 */
> + <0x00098000 0x00098000 0x001000>, /* ap 47 */
> + <0x00099000 0x00099000 0x001000>, /* ap 48 */
> + <0x0009a000 0x0009a000 0x001000>, /* ap 49 */
> + <0x0009b000 0x0009b000 0x001000>, /* ap 50 */
> + <0x0009c000 0x0009c000 0x001000>, /* ap 51 */
> + <0x0009d000 0x0009d000 0x001000>, /* ap 52 */
> + <0x00068000 0x00068000 0x001000>, /* ap 53 */
> + <0x00069000 0x00069000 0x001000>, /* ap 54 */
> + <0x00090000 0x00090000 0x002000>, /* ap 55 */
> + <0x00092000 0x00092000 0x001000>, /* ap 56 */
> + <0x000a4000 0x000a4000 0x001000>, /* ap 57 */
> + <0x000a6000 0x000a6000 0x001000>, /* ap 58 */
> + <0x000a8000 0x000a8000 0x004000>, /* ap 59 */
> + <0x000ac000 0x000ac000 0x001000>, /* ap 60 */
> + <0x000ad000 0x000ad000 0x001000>, /* ap 61 */
> + <0x000ae000 0x000ae000 0x001000>, /* ap 62 */
> + <0x00066000 0x00066000 0x001000>, /* ap 63 */
> + <0x00067000 0x00067000 0x001000>, /* ap 64 */
> + <0x000b4000 0x000b4000 0x001000>, /* ap 65 */
> + <0x000b5000 0x000b5000 0x001000>, /* ap 66 */
> + <0x000b8000 0x000b8000 0x001000>, /* ap 67 */
> + <0x000b9000 0x000b9000 0x001000>, /* ap 68 */
> + <0x000ba000 0x000ba000 0x001000>, /* ap 69 */
> + <0x000bb000 0x000bb000 0x001000>, /* ap 70 */
> + <0x000d1000 0x000d1000 0x001000>, /* ap 71 */
> + <0x000d2000 0x000d2000 0x001000>, /* ap 72 */
> + <0x000d5000 0x000d5000 0x001000>, /* ap 73 */
> + <0x000d6000 0x000d6000 0x001000>, /* ap 74 */
> + <0x000a2000 0x000a2000 0x001000>, /* ap 75 */
> + <0x000a3000 0x000a3000 0x001000>, /* ap 76 */
> + <0x00001400 0x00001400 0x000400>, /* ap 77 */
> + <0x00001800 0x00001800 0x000400>, /* ap 78 */
> + <0x00001c00 0x00001c00 0x000400>, /* ap 79 */
> + <0x000a5000 0x000a5000 0x001000>, /* ap 80 */
> + <0x0007a000 0x0007a000 0x001000>, /* ap 81 */
> + <0x0007b000 0x0007b000 0x001000>, /* ap 82 */
> + <0x0007c000 0x0007c000 0x001000>, /* ap 83 */
> + <0x0007d000 0x0007d000 0x001000>; /* ap 84 */
> +
> + target-module@20000 { /* 0x48020000, ap 3 04.0 */
> + compatible = "ti,sysc-omap2", "ti,sysc";
> + ti,hwmods = "uart3";
> + reg = <0x20050 0x4>,
> + <0x20054 0x4>,
> + <0x20058 0x4>;
> + reg-names = "rev", "sysc", "syss";
> + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
> + SYSC_OMAP2_SOFTRESET |
> + SYSC_OMAP2_AUTOIDLE)>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>,
> + <SYSC_IDLE_SMART_WKUP>;
> + ti,syss-mask = <1>;
> + ti,no-reset-on-init;
> + ti,no-idle-on-init;
> + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
> + clocks = <&l4per_clkctrl OMAP5_UART3_CLKCTRL 0>;
> + clock-names = "fck";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x20000 0x1000>;
> +
> + uart3: serial@0 {
> + compatible = "ti,omap4-uart";
> + reg = <0x0 0x100>;
> + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
> + clock-frequency = <48000000>;
> + };
> + };
> +
> + target-module@32000 { /* 0x48032000, ap 5 3e.0 */
> + compatible = "ti,sysc-omap4-timer", "ti,sysc";
> + ti,hwmods = "timer2";
> + reg = <0x32000 0x4>,
> + <0x32010 0x4>;
> + reg-names = "rev", "sysc";
> + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
> + SYSC_OMAP4_SOFTRESET)>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>,
> + <SYSC_IDLE_SMART_WKUP>;
> + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
> + clocks = <&l4per_clkctrl OMAP5_TIMER2_CLKCTRL 0>;
> + clock-names = "fck";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x32000 0x1000>;
> +
> + timer2: timer@0 {
> + compatible = "ti,omap5430-timer";
> + reg = <0x0 0x80>;
> + clocks = <&l4per_clkctrl OMAP5_TIMER2_CLKCTRL 24>;
> + clock-names = "fck";
> + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
> + };
> + };
> +
> + target-module@34000 { /* 0x48034000, ap 7 46.0 */
> + compatible = "ti,sysc-omap4-timer", "ti,sysc";
> + ti,hwmods = "timer3";
> + reg = <0x34000 0x4>,
> + <0x34010 0x4>;
> + reg-names = "rev", "sysc";
> + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
> + SYSC_OMAP4_SOFTRESET)>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>,
> + <SYSC_IDLE_SMART_WKUP>;
> + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
> + clocks = <&l4per_clkctrl OMAP5_TIMER3_CLKCTRL 0>;
> + clock-names = "fck";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x34000 0x1000>;
> +
> + timer3: timer@0 {
> + compatible = "ti,omap5430-timer";
> + reg = <0x0 0x80>;
> + clocks = <&l4per_clkctrl OMAP5_TIMER3_CLKCTRL 24>;
> + clock-names = "fck";
> + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
> + };
> + };
> +
> + target-module@36000 { /* 0x48036000, ap 9 4e.0 */
> + compatible = "ti,sysc-omap4-timer", "ti,sysc";
> + ti,hwmods = "timer4";
> + reg = <0x36000 0x4>,
> + <0x36010 0x4>;
> + reg-names = "rev", "sysc";
> + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
> + SYSC_OMAP4_SOFTRESET)>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>,
> + <SYSC_IDLE_SMART_WKUP>;
> + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
> + clocks = <&l4per_clkctrl OMAP5_TIMER4_CLKCTRL 0>;
> + clock-names = "fck";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x36000 0x1000>;
> +
> + timer4: timer@0 {
> + compatible = "ti,omap5430-timer";
> + reg = <0x0 0x80>;
> + clocks = <&l4per_clkctrl OMAP5_TIMER4_CLKCTRL 24>;
> + clock-names = "fck";
> + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
> + };
> + };
> +
> + target-module@3e000 { /* 0x4803e000, ap 11 56.0 */
> + compatible = "ti,sysc-omap4-timer", "ti,sysc";
> + ti,hwmods = "timer9";
> + reg = <0x3e000 0x4>,
> + <0x3e010 0x4>;
> + reg-names = "rev", "sysc";
> + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
> + SYSC_OMAP4_SOFTRESET)>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>,
> + <SYSC_IDLE_SMART_WKUP>;
> + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
> + clocks = <&l4per_clkctrl OMAP5_TIMER9_CLKCTRL 0>;
> + clock-names = "fck";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x3e000 0x1000>;
> +
> + timer9: timer@0 {
> + compatible = "ti,omap5430-timer";
> + reg = <0x0 0x80>;
> + clocks = <&l4per_clkctrl OMAP5_TIMER9_CLKCTRL 24>;
> + clock-names = "fck";
> + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
> + ti,timer-pwm;
> + };
> + };
> +
> + target-module@51000 { /* 0x48051000, ap 45 2e.0 */
> + compatible = "ti,sysc-omap2", "ti,sysc";
> + ti,hwmods = "gpio7";
> + reg = <0x51000 0x4>,
> + <0x51010 0x4>,
> + <0x51114 0x4>;
> + reg-names = "rev", "sysc", "syss";
> + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
> + SYSC_OMAP2_SOFTRESET |
> + SYSC_OMAP2_AUTOIDLE)>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>,
> + <SYSC_IDLE_SMART_WKUP>;
> + ti,syss-mask = <1>;
> + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
> + clocks = <&l4per_clkctrl OMAP5_GPIO7_CLKCTRL 0>,
> + <&l4per_clkctrl OMAP5_GPIO7_CLKCTRL 8>;
> + clock-names = "fck", "dbclk";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x51000 0x1000>;
> +
> + gpio7: gpio@0 {
> + compatible = "ti,omap4-gpio";
> + reg = <0x0 0x200>;
> + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> + };
> +
> + target-module@53000 { /* 0x48053000, ap 35 36.0 */
> + compatible = "ti,sysc-omap2", "ti,sysc";
> + ti,hwmods = "gpio8";
> + reg = <0x53000 0x4>,
> + <0x53010 0x4>,
> + <0x53114 0x4>;
> + reg-names = "rev", "sysc", "syss";
> + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
> + SYSC_OMAP2_SOFTRESET |
> + SYSC_OMAP2_AUTOIDLE)>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>,
> + <SYSC_IDLE_SMART_WKUP>;
> + ti,syss-mask = <1>;
> + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
> + clocks = <&l4per_clkctrl OMAP5_GPIO8_CLKCTRL 0>,
> + <&l4per_clkctrl OMAP5_GPIO8_CLKCTRL 8>;
> + clock-names = "fck", "dbclk";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x53000 0x1000>;
> +
> + gpio8: gpio@0 {
> + compatible = "ti,omap4-gpio";
> + reg = <0x0 0x200>;
> + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> + };
> +
> + target-module@55000 { /* 0x48055000, ap 13 0e.0 */
> + compatible = "ti,sysc-omap2", "ti,sysc";
> + ti,hwmods = "gpio2";
> + reg = <0x55000 0x4>,
> + <0x55010 0x4>,
> + <0x55114 0x4>;
> + reg-names = "rev", "sysc", "syss";
> + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
> + SYSC_OMAP2_SOFTRESET |
> + SYSC_OMAP2_AUTOIDLE)>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>,
> + <SYSC_IDLE_SMART_WKUP>;
> + ti,syss-mask = <1>;
> + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
> + clocks = <&l4per_clkctrl OMAP5_GPIO2_CLKCTRL 0>,
> + <&l4per_clkctrl OMAP5_GPIO2_CLKCTRL 8>;
> + clock-names = "fck", "dbclk";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x55000 0x1000>;
> +
> + gpio2: gpio@0 {
> + compatible = "ti,omap4-gpio";
> + reg = <0x0 0x200>;
> + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> + };
> +
> + target-module@57000 { /* 0x48057000, ap 15 06.0 */
> + compatible = "ti,sysc-omap2", "ti,sysc";
> + ti,hwmods = "gpio3";
> + reg = <0x57000 0x4>,
> + <0x57010 0x4>,
> + <0x57114 0x4>;
> + reg-names = "rev", "sysc", "syss";
> + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
> + SYSC_OMAP2_SOFTRESET |
> + SYSC_OMAP2_AUTOIDLE)>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>,
> + <SYSC_IDLE_SMART_WKUP>;
> + ti,syss-mask = <1>;
> + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
> + clocks = <&l4per_clkctrl OMAP5_GPIO3_CLKCTRL 0>,
> + <&l4per_clkctrl OMAP5_GPIO3_CLKCTRL 8>;
> + clock-names = "fck", "dbclk";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x57000 0x1000>;
> +
> + gpio3: gpio@0 {
> + compatible = "ti,omap4-gpio";
> + reg = <0x0 0x200>;
> + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> + };
> +
> + target-module@59000 { /* 0x48059000, ap 17 16.0 */
> + compatible = "ti,sysc-omap2", "ti,sysc";
> + ti,hwmods = "gpio4";
> + reg = <0x59000 0x4>,
> + <0x59010 0x4>,
> + <0x59114 0x4>;
> + reg-names = "rev", "sysc", "syss";
> + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
> + SYSC_OMAP2_SOFTRESET |
> + SYSC_OMAP2_AUTOIDLE)>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>,
> + <SYSC_IDLE_SMART_WKUP>;
> + ti,syss-mask = <1>;
> + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
> + clocks = <&l4per_clkctrl OMAP5_GPIO4_CLKCTRL 0>,
> + <&l4per_clkctrl OMAP5_GPIO4_CLKCTRL 8>;
> + clock-names = "fck", "dbclk";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x59000 0x1000>;
> +
> + gpio4: gpio@0 {
> + compatible = "ti,omap4-gpio";
> + reg = <0x0 0x200>;
> + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> + };
> +
> + target-module@5b000 { /* 0x4805b000, ap 19 1e.0 */
> + compatible = "ti,sysc-omap2", "ti,sysc";
> + ti,hwmods = "gpio5";
> + reg = <0x5b000 0x4>,
> + <0x5b010 0x4>,
> + <0x5b114 0x4>;
> + reg-names = "rev", "sysc", "syss";
> + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
> + SYSC_OMAP2_SOFTRESET |
> + SYSC_OMAP2_AUTOIDLE)>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>,
> + <SYSC_IDLE_SMART_WKUP>;
> + ti,syss-mask = <1>;
> + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
> + clocks = <&l4per_clkctrl OMAP5_GPIO5_CLKCTRL 0>,
> + <&l4per_clkctrl OMAP5_GPIO5_CLKCTRL 8>;
> + clock-names = "fck", "dbclk";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x5b000 0x1000>;
> +
> + gpio5: gpio@0 {
> + compatible = "ti,omap4-gpio";
> + reg = <0x0 0x200>;
> + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> + };
> +
> + target-module@5d000 { /* 0x4805d000, ap 21 26.0 */
> + compatible = "ti,sysc-omap2", "ti,sysc";
> + ti,hwmods = "gpio6";
> + reg = <0x5d000 0x4>,
> + <0x5d010 0x4>,
> + <0x5d114 0x4>;
> + reg-names = "rev", "sysc", "syss";
> + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
> + SYSC_OMAP2_SOFTRESET |
> + SYSC_OMAP2_AUTOIDLE)>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>,
> + <SYSC_IDLE_SMART_WKUP>;
> + ti,syss-mask = <1>;
> + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
> + clocks = <&l4per_clkctrl OMAP5_GPIO6_CLKCTRL 0>,
> + <&l4per_clkctrl OMAP5_GPIO6_CLKCTRL 8>;
> + clock-names = "fck", "dbclk";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x5d000 0x1000>;
> +
> + gpio6: gpio@0 {
> + compatible = "ti,omap4-gpio";
> + reg = <0x0 0x200>;
> + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> + };
> +
> + target-module@60000 { /* 0x48060000, ap 23 24.0 */
> + compatible = "ti,sysc-omap2", "ti,sysc";
> + ti,hwmods = "i2c3";
> + reg = <0x60000 0x8>,
> + <0x60010 0x8>,
> + <0x60090 0x8>;
> + reg-names = "rev", "sysc", "syss";
> + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
> + SYSC_OMAP2_ENAWAKEUP |
> + SYSC_OMAP2_SOFTRESET |
> + SYSC_OMAP2_AUTOIDLE)>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>,
> + <SYSC_IDLE_SMART_WKUP>;
> + ti,syss-mask = <1>;
> + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
> + clocks = <&l4per_clkctrl OMAP5_I2C3_CLKCTRL 0>;
> + clock-names = "fck";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x60000 0x1000>;
> +
> + i2c3: i2c@0 {
> + compatible = "ti,omap4-i2c";
> + reg = <0x0 0x100>;
> + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + };
> +
> + target-module@66000 { /* 0x48066000, ap 63 4c.0 */
> + compatible = "ti,sysc-omap2", "ti,sysc";
> + ti,hwmods = "uart5";
> + reg = <0x66050 0x4>,
> + <0x66054 0x4>,
> + <0x66058 0x4>;
> + reg-names = "rev", "sysc", "syss";
> + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
> + SYSC_OMAP2_SOFTRESET |
> + SYSC_OMAP2_AUTOIDLE)>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>,
> + <SYSC_IDLE_SMART_WKUP>;
> + ti,syss-mask = <1>;
> + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
> + clocks = <&l4per_clkctrl OMAP5_UART5_CLKCTRL 0>;
> + clock-names = "fck";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x66000 0x1000>;
> +
> + uart5: serial@0 {
> + compatible = "ti,omap4-uart";
> + reg = <0x0 0x100>;
> + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
> + clock-frequency = <48000000>;
> + };
> + };
> +
> + target-module@68000 { /* 0x48068000, ap 53 54.0 */
> + compatible = "ti,sysc-omap2", "ti,sysc";
> + ti,hwmods = "uart6";
> + reg = <0x68050 0x4>,
> + <0x68054 0x4>,
> + <0x68058 0x4>;
> + reg-names = "rev", "sysc", "syss";
> + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
> + SYSC_OMAP2_SOFTRESET |
> + SYSC_OMAP2_AUTOIDLE)>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>,
> + <SYSC_IDLE_SMART_WKUP>;
> + ti,syss-mask = <1>;
> + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
> + clocks = <&l4per_clkctrl OMAP5_UART6_CLKCTRL 0>;
> + clock-names = "fck";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x68000 0x1000>;
> +
> + uart6: serial@0 {
> + compatible = "ti,omap4-uart";
> + reg = <0x0 0x100>;
> + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
> + clock-frequency = <48000000>;
> + };
> + };
> +
> + target-module@6a000 { /* 0x4806a000, ap 24 0a.0 */
> + compatible = "ti,sysc-omap2", "ti,sysc";
> + ti,hwmods = "uart1";
> + reg = <0x6a050 0x4>,
> + <0x6a054 0x4>,
> + <0x6a058 0x4>;
> + reg-names = "rev", "sysc", "syss";
> + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
> + SYSC_OMAP2_SOFTRESET |
> + SYSC_OMAP2_AUTOIDLE)>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>,
> + <SYSC_IDLE_SMART_WKUP>;
> + ti,syss-mask = <1>;
> + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
> + clocks = <&l4per_clkctrl OMAP5_UART1_CLKCTRL 0>;
> + clock-names = "fck";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x6a000 0x1000>;
> +
> + uart1: serial@0 {
> + compatible = "ti,omap4-uart";
> + reg = <0x0 0x100>;
> + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
> + clock-frequency = <48000000>;
> + };
> + };
> +
> + target-module@6c000 { /* 0x4806c000, ap 26 22.0 */
> + compatible = "ti,sysc-omap2", "ti,sysc";
> + ti,hwmods = "uart2";
> + reg = <0x6c050 0x4>,
> + <0x6c054 0x4>,
> + <0x6c058 0x4>;
> + reg-names = "rev", "sysc", "syss";
> + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
> + SYSC_OMAP2_SOFTRESET |
> + SYSC_OMAP2_AUTOIDLE)>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>,
> + <SYSC_IDLE_SMART_WKUP>;
> + ti,syss-mask = <1>;
> + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
> + clocks = <&l4per_clkctrl OMAP5_UART2_CLKCTRL 0>;
> + clock-names = "fck";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x6c000 0x1000>;
> +
> + uart2: serial@0 {
> + compatible = "ti,omap4-uart";
> + reg = <0x0 0x100>;
> + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
> + clock-frequency = <48000000>;
> + };
> + };
> +
> + target-module@6e000 { /* 0x4806e000, ap 28 44.1 */
> + compatible = "ti,sysc-omap2", "ti,sysc";
> + ti,hwmods = "uart4";
> + reg = <0x6e050 0x4>,
> + <0x6e054 0x4>,
> + <0x6e058 0x4>;
> + reg-names = "rev", "sysc", "syss";
> + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
> + SYSC_OMAP2_SOFTRESET |
> + SYSC_OMAP2_AUTOIDLE)>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>,
> + <SYSC_IDLE_SMART_WKUP>;
> + ti,syss-mask = <1>;
> + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
> + clocks = <&l4per_clkctrl OMAP5_UART4_CLKCTRL 0>;
> + clock-names = "fck";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x6e000 0x1000>;
> +
> + uart4: serial@0 {
> + compatible = "ti,omap4-uart";
> + reg = <0x0 0x100>;
> + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
> + clock-frequency = <48000000>;
> + };
> + };
> +
> + target-module@70000 { /* 0x48070000, ap 30 14.0 */
> + compatible = "ti,sysc-omap2", "ti,sysc";
> + ti,hwmods = "i2c1";
> + reg = <0x70000 0x8>,
> + <0x70010 0x8>,
> + <0x70090 0x8>;
> + reg-names = "rev", "sysc", "syss";
> + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
> + SYSC_OMAP2_ENAWAKEUP |
> + SYSC_OMAP2_SOFTRESET |
> + SYSC_OMAP2_AUTOIDLE)>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>,
> + <SYSC_IDLE_SMART_WKUP>;
> + ti,syss-mask = <1>;
> + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
> + clocks = <&l4per_clkctrl OMAP5_I2C1_CLKCTRL 0>;
> + clock-names = "fck";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x70000 0x1000>;
> +
> + i2c1: i2c@0 {
> + compatible = "ti,omap4-i2c";
> + reg = <0x0 0x100>;
> + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + };
> +
> + target-module@72000 { /* 0x48072000, ap 32 1c.0 */
> + compatible = "ti,sysc-omap2", "ti,sysc";
> + ti,hwmods = "i2c2";
> + reg = <0x72000 0x8>,
> + <0x72010 0x8>,
> + <0x72090 0x8>;
> + reg-names = "rev", "sysc", "syss";
> + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
> + SYSC_OMAP2_ENAWAKEUP |
> + SYSC_OMAP2_SOFTRESET |
> + SYSC_OMAP2_AUTOIDLE)>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>,
> + <SYSC_IDLE_SMART_WKUP>;
> + ti,syss-mask = <1>;
> + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
> + clocks = <&l4per_clkctrl OMAP5_I2C2_CLKCTRL 0>;
> + clock-names = "fck";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x72000 0x1000>;
> +
> + i2c2: i2c@0 {
> + compatible = "ti,omap4-i2c";
> + reg = <0x0 0x100>;
> + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + };
> +
> + target-module@78000 { /* 0x48078000, ap 39 12.0 */
> + compatible = "ti,sysc";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x78000 0x1000>;
> + };
> +
> + target-module@7a000 { /* 0x4807a000, ap 81 2c.0 */
> + compatible = "ti,sysc-omap2", "ti,sysc";
> + ti,hwmods = "i2c4";
> + reg = <0x7a000 0x8>,
> + <0x7a010 0x8>,
> + <0x7a090 0x8>;
> + reg-names = "rev", "sysc", "syss";
> + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
> + SYSC_OMAP2_ENAWAKEUP |
> + SYSC_OMAP2_SOFTRESET |
> + SYSC_OMAP2_AUTOIDLE)>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>,
> + <SYSC_IDLE_SMART_WKUP>;
> + ti,syss-mask = <1>;
> + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
> + clocks = <&l4per_clkctrl OMAP5_I2C4_CLKCTRL 0>;
> + clock-names = "fck";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x7a000 0x1000>;
> +
> + i2c4: i2c@0 {
> + compatible = "ti,omap4-i2c";
> + reg = <0x0 0x100>;
> + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + };
> +
> + target-module@7c000 { /* 0x4807c000, ap 83 34.0 */
> + compatible = "ti,sysc-omap2", "ti,sysc";
> + ti,hwmods = "i2c5";
> + reg = <0x7c000 0x8>,
> + <0x7c010 0x8>,
> + <0x7c090 0x8>;
> + reg-names = "rev", "sysc", "syss";
> + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
> + SYSC_OMAP2_ENAWAKEUP |
> + SYSC_OMAP2_SOFTRESET |
> + SYSC_OMAP2_AUTOIDLE)>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>,
> + <SYSC_IDLE_SMART_WKUP>;
> + ti,syss-mask = <1>;
> + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
> + clocks = <&l4per_clkctrl OMAP5_I2C5_CLKCTRL 0>;
> + clock-names = "fck";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x7c000 0x1000>;
> +
> + i2c5: i2c@0 {
> + compatible = "ti,omap4-i2c";
> + reg = <0x0 0x100>;
> + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + };
> +
> + target-module@86000 { /* 0x48086000, ap 41 5e.0 */
> + compatible = "ti,sysc-omap4-timer", "ti,sysc";
> + ti,hwmods = "timer10";
> + reg = <0x86000 0x4>,
> + <0x86010 0x4>;
> + reg-names = "rev", "sysc";
> + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
> + SYSC_OMAP4_SOFTRESET)>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>,
> + <SYSC_IDLE_SMART_WKUP>;
> + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
> + clocks = <&l4per_clkctrl OMAP5_TIMER10_CLKCTRL 0>;
> + clock-names = "fck";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x86000 0x1000>;
> +
> + timer10: timer@0 {
> + compatible = "ti,omap5430-timer";
> + reg = <0x0 0x80>;
> + clocks = <&l4per_clkctrl OMAP5_TIMER10_CLKCTRL 24>;
> + clock-names = "fck";
> + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
> + ti,timer-pwm;
> + };
> + };
> +
> + target-module@88000 { /* 0x48088000, ap 43 66.0 */
> + compatible = "ti,sysc-omap4-timer", "ti,sysc";
> + ti,hwmods = "timer11";
> + reg = <0x88000 0x4>,
> + <0x88010 0x4>;
> + reg-names = "rev", "sysc";
> + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
> + SYSC_OMAP4_SOFTRESET)>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>,
> + <SYSC_IDLE_SMART_WKUP>;
> + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
> + clocks = <&l4per_clkctrl OMAP5_TIMER11_CLKCTRL 0>;
> + clock-names = "fck";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x88000 0x1000>;
> +
> + timer11: timer@0 {
> + compatible = "ti,omap5430-timer";
> + reg = <0x0 0x80>;
> + clocks = <&l4per_clkctrl OMAP5_TIMER11_CLKCTRL 24>;
> + clock-names = "fck";
> + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
> + ti,timer-pwm;
> + };
> + };
> +
> + target-module@90000 { /* 0x48090000, ap 55 1a.0 */
> + compatible = "ti,sysc";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x90000 0x2000>;
> + };
> +
> + target-module@98000 { /* 0x48098000, ap 47 08.0 */
> + compatible = "ti,sysc-omap4", "ti,sysc";
> + ti,hwmods = "mcspi1";
> + reg = <0x98000 0x4>,
> + <0x98010 0x4>;
> + reg-names = "rev", "sysc";
> + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
> + SYSC_OMAP4_SOFTRESET)>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>,
> + <SYSC_IDLE_SMART_WKUP>;
> + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
> + clocks = <&l4per_clkctrl OMAP5_MCSPI1_CLKCTRL 0>;
> + clock-names = "fck";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x98000 0x1000>;
> +
> + mcspi1: spi@0 {
> + compatible = "ti,omap4-mcspi";
> + reg = <0x0 0x200>;
> + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + ti,spi-num-cs = <4>;
> + dmas = <&sdma 35>,
> + <&sdma 36>,
> + <&sdma 37>,
> + <&sdma 38>,
> + <&sdma 39>,
> + <&sdma 40>,
> + <&sdma 41>,
> + <&sdma 42>;
> + dma-names = "tx0", "rx0", "tx1", "rx1",
> + "tx2", "rx2", "tx3", "rx3";
> + };
> + };
> +
> + target-module@9a000 { /* 0x4809a000, ap 49 10.0 */
> + compatible = "ti,sysc-omap4", "ti,sysc";
> + ti,hwmods = "mcspi2";
> + reg = <0x9a000 0x4>,
> + <0x9a010 0x4>;
> + reg-names = "rev", "sysc";
> + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
> + SYSC_OMAP4_SOFTRESET)>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>,
> + <SYSC_IDLE_SMART_WKUP>;
> + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
> + clocks = <&l4per_clkctrl OMAP5_MCSPI2_CLKCTRL 0>;
> + clock-names = "fck";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x9a000 0x1000>;
> +
> + mcspi2: spi@0 {
> + compatible = "ti,omap4-mcspi";
> + reg = <0x0 0x200>;
> + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + ti,spi-num-cs = <2>;
> + dmas = <&sdma 43>,
> + <&sdma 44>,
> + <&sdma 45>,
> + <&sdma 46>;
> + dma-names = "tx0", "rx0", "tx1", "rx1";
> + };
> + };
> +
> + target-module@9c000 { /* 0x4809c000, ap 51 3a.0 */
> + compatible = "ti,sysc-omap4", "ti,sysc";
> + ti,hwmods = "mmc1";
> + reg = <0x9c000 0x4>,
> + <0x9c010 0x4>;
> + reg-names = "rev", "sysc";
> + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
> + SYSC_OMAP4_SOFTRESET)>;
> + ti,sysc-midle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>,
> + <SYSC_IDLE_SMART_WKUP>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>,
> + <SYSC_IDLE_SMART_WKUP>;
> + /* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */
> + clocks = <&l3init_clkctrl OMAP5_MMC1_CLKCTRL 0>;
> + clock-names = "fck";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x9c000 0x1000>;
> +
> + mmc1: mmc@0 {
> + compatible = "ti,omap4-hsmmc";
> + reg = <0x0 0x400>;
> + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> + ti,dual-volt;
> + ti,needs-special-reset;
> + dmas = <&sdma 61>, <&sdma 62>;
> + dma-names = "tx", "rx";
> + pbias-supply = <&pbias_mmc_reg>;
> + };
> + };
> +
> + target-module@a2000 { /* 0x480a2000, ap 75 02.0 */
> + compatible = "ti,sysc";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0xa2000 0x1000>;
> + };
> +
> + target-module@a4000 { /* 0x480a4000, ap 57 3c.0 */
> + compatible = "ti,sysc";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x00000000 0x000a4000 0x00001000>,
> + <0x00001000 0x000a5000 0x00001000>;
> + };
> +
> + target-module@a8000 { /* 0x480a8000, ap 59 2a.0 */
> + compatible = "ti,sysc";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0xa8000 0x4000>;
> + };
> +
> + target-module@ad000 { /* 0x480ad000, ap 61 20.0 */
> + compatible = "ti,sysc-omap4", "ti,sysc";
> + ti,hwmods = "mmc3";
> + reg = <0xad000 0x4>,
> + <0xad010 0x4>;
> + reg-names = "rev", "sysc";
> + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
> + SYSC_OMAP4_SOFTRESET)>;
> + ti,sysc-midle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>,
> + <SYSC_IDLE_SMART_WKUP>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>,
> + <SYSC_IDLE_SMART_WKUP>;
> + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
> + clocks = <&l4per_clkctrl OMAP5_MMC3_CLKCTRL 0>;
> + clock-names = "fck";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0xad000 0x1000>;
> +
> + mmc3: mmc@0 {
> + compatible = "ti,omap4-hsmmc";
> + reg = <0x0 0x400>;
> + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
> + ti,needs-special-reset;
> + dmas = <&sdma 77>, <&sdma 78>;
> + dma-names = "tx", "rx";
> + };
> + };
> +
> + target-module@b2000 { /* 0x480b2000, ap 37 0c.0 */
> + compatible = "ti,sysc";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0xb2000 0x1000>;
> + };
> +
> + target-module@b4000 { /* 0x480b4000, ap 65 42.0 */
> + compatible = "ti,sysc-omap4", "ti,sysc";
> + ti,hwmods = "mmc2";
> + reg = <0xb4000 0x4>,
> + <0xb4010 0x4>;
> + reg-names = "rev", "sysc";
> + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
> + SYSC_OMAP4_SOFTRESET)>;
> + ti,sysc-midle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>,
> + <SYSC_IDLE_SMART_WKUP>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>,
> + <SYSC_IDLE_SMART_WKUP>;
> + /* Domains (V, P, C): core, l3init_pwrdm, l3init_clkdm */
> + clocks = <&l3init_clkctrl OMAP5_MMC2_CLKCTRL 0>;
> + clock-names = "fck";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0xb4000 0x1000>;
> +
> + mmc2: mmc@0 {
> + compatible = "ti,omap4-hsmmc";
> + reg = <0x0 0x400>;
> + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
> + ti,needs-special-reset;
> + dmas = <&sdma 47>, <&sdma 48>;
> + dma-names = "tx", "rx";
> + };
> + };
> +
> + target-module@b8000 { /* 0x480b8000, ap 67 32.0 */
> + compatible = "ti,sysc-omap4", "ti,sysc";
> + ti,hwmods = "mcspi3";
> + reg = <0xb8000 0x4>,
> + <0xb8010 0x4>;
> + reg-names = "rev", "sysc";
> + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
> + SYSC_OMAP4_SOFTRESET)>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>,
> + <SYSC_IDLE_SMART_WKUP>;
> + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
> + clocks = <&l4per_clkctrl OMAP5_MCSPI3_CLKCTRL 0>;
> + clock-names = "fck";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0xb8000 0x1000>;
> +
> + mcspi3: spi@0 {
> + compatible = "ti,omap4-mcspi";
> + reg = <0x0 0x200>;
> + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + ti,spi-num-cs = <2>;
> + dmas = <&sdma 15>, <&sdma 16>;
> + dma-names = "tx0", "rx0";
> + };
> + };
> +
> + target-module@ba000 { /* 0x480ba000, ap 69 18.0 */
> + compatible = "ti,sysc-omap4", "ti,sysc";
> + ti,hwmods = "mcspi4";
> + reg = <0xba000 0x4>,
> + <0xba010 0x4>;
> + reg-names = "rev", "sysc";
> + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
> + SYSC_OMAP4_SOFTRESET)>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>,
> + <SYSC_IDLE_SMART_WKUP>;
> + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
> + clocks = <&l4per_clkctrl OMAP5_MCSPI4_CLKCTRL 0>;
> + clock-names = "fck";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0xba000 0x1000>;
> +
> + mcspi4: spi@0 {
> + compatible = "ti,omap4-mcspi";
> + reg = <0x0 0x200>;
> + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + ti,spi-num-cs = <1>;
> + dmas = <&sdma 70>, <&sdma 71>;
> + dma-names = "tx0", "rx0";
> + };
> + };
> +
> + target-module@d1000 { /* 0x480d1000, ap 71 28.0 */
> + compatible = "ti,sysc-omap4", "ti,sysc";
> + ti,hwmods = "mmc4";
> + reg = <0xd1000 0x4>,
> + <0xd1010 0x4>;
> + reg-names = "rev", "sysc";
> + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
> + SYSC_OMAP4_SOFTRESET)>;
> + ti,sysc-midle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>,
> + <SYSC_IDLE_SMART_WKUP>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>,
> + <SYSC_IDLE_SMART_WKUP>;
> + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
> + clocks = <&l4per_clkctrl OMAP5_MMC4_CLKCTRL 0>;
> + clock-names = "fck";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0xd1000 0x1000>;
> +
> + mmc4: mmc@0 {
> + compatible = "ti,omap4-hsmmc";
> + reg = <0x0 0x400>;
> + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
> + ti,needs-special-reset;
> + dmas = <&sdma 57>, <&sdma 58>;
> + dma-names = "tx", "rx";
> + };
> + };
> +
> + target-module@d5000 { /* 0x480d5000, ap 73 30.0 */
> + compatible = "ti,sysc-omap4", "ti,sysc";
> + ti,hwmods = "mmc5";
> + reg = <0xd5000 0x4>,
> + <0xd5010 0x4>;
> + reg-names = "rev", "sysc";
> + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
> + SYSC_OMAP4_SOFTRESET)>;
> + ti,sysc-midle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>,
> + <SYSC_IDLE_SMART_WKUP>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>,
> + <SYSC_IDLE_SMART_WKUP>;
> + /* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
> + clocks = <&l4per_clkctrl OMAP5_MMC5_CLKCTRL 0>;
> + clock-names = "fck";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0xd5000 0x1000>;
> +
> + mmc5: mmc@0 {
> + compatible = "ti,omap4-hsmmc";
> + reg = <0x0 0x400>;
> + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
> + ti,needs-special-reset;
> + dmas = <&sdma 59>, <&sdma 60>;
> + dma-names = "tx", "rx";
> + };
> + };
> + };
> +
> + segment@200000 { /* 0x48200000 */
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + };
> +};
> +
> +&l4_wkup { /* 0x4ae00000 */
> + compatible = "ti,omap5-l4-wkup", "simple-bus";
> + reg = <0x4ae00000 0x800>,
> + <0x4ae00800 0x800>,
> + <0x4ae01000 0x1000>;
> + reg-names = "ap", "la", "ia0";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x00000000 0x4ae00000 0x010000>, /* segment 0 */
> + <0x00010000 0x4ae10000 0x010000>, /* segment 1 */
> + <0x00020000 0x4ae20000 0x010000>; /* segment 2 */
> +
> + segment@0 { /* 0x4ae00000 */
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
> + <0x00001000 0x00001000 0x001000>, /* ap 1 */
> + <0x00000800 0x00000800 0x000800>, /* ap 2 */
> + <0x00006000 0x00006000 0x002000>, /* ap 3 */
> + <0x00008000 0x00008000 0x001000>, /* ap 4 */
> + <0x0000a000 0x0000a000 0x001000>, /* ap 15 */
> + <0x0000b000 0x0000b000 0x001000>, /* ap 16 */
> + <0x00004000 0x00004000 0x001000>, /* ap 17 */
> + <0x00005000 0x00005000 0x001000>, /* ap 18 */
> + <0x0000c000 0x0000c000 0x001000>, /* ap 19 */
> + <0x0000d000 0x0000d000 0x001000>; /* ap 20 */
> +
> + target-module@4000 { /* 0x4ae04000, ap 17 20.0 */
> + compatible = "ti,sysc-omap2", "ti,sysc";
> + ti,hwmods = "counter_32k";
> + reg = <0x4000 0x4>,
> + <0x4010 0x4>;
> + reg-names = "rev", "sysc";
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>;
> + /* Domains (V, P, C): wkup, wkupaon_pwrdm, wkupaon_clkdm */
> + clocks = <&wkupaon_clkctrl OMAP5_COUNTER_32K_CLKCTRL 0>;
> + clock-names = "fck";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x4000 0x1000>;
> +
> + counter32k: counter@0 {
> + compatible = "ti,omap-counter32k";
> + reg = <0x0 0x40>;
> + };
> + };
> +
> + target-module@6000 { /* 0x4ae06000, ap 3 08.0 */
> + compatible = "ti,sysc-omap4", "ti,sysc";
> + reg = <0x6000 0x4>;
> + reg-names = "rev";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x6000 0x2000>;
> +
> + prm: prm@0 {
> + compatible = "ti,omap5-prm", "simple-bus";
> + reg = <0x0 0x2000>;
> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0 0x2000>;
> +
> + prm_clocks: clocks {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + prm_clockdomains: clockdomains {
> + };
> + };
> + };
> +
> + target-module@a000 { /* 0x4ae0a000, ap 15 2c.0 */
> + compatible = "ti,sysc-omap4", "ti,sysc";
> + reg = <0xa000 0x4>;
> + reg-names = "rev";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0xa000 0x1000>;
> +
> + scrm: scrm@0 {
> + compatible = "ti,omap5-scrm";
> + reg = <0x0 0x1000>;
> +
> + scrm_clocks: clocks {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + scrm_clockdomains: clockdomains {
> + };
> + };
> + };
> +
> + target-module@c000 { /* 0x4ae0c000, ap 19 28.0 */
> + compatible = "ti,sysc-omap4", "ti,sysc";
> + reg = <0xc000 0x4>;
> + reg-names = "rev";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0xc000 0x1000>;
> +
> + omap5_pmx_wkup: pinmux@840 {
> + compatible = "ti,omap5-padconf",
> + "pinctrl-single";
> + reg = <0x840 0x003c>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #pinctrl-cells = <1>;
> + #interrupt-cells = <1>;
> + interrupt-controller;
> + pinctrl-single,register-width = <16>;
> + pinctrl-single,function-mask = <0x7fff>;
> + };
> +
> + omap5_scm_wkup_pad_conf: omap5_scm_wkup_pad_conf@da0 {
> + compatible = "ti,omap5-scm-wkup-pad-conf",
> + "simple-bus";
> + reg = <0xda0 0x60>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0 0x60>;
> +
> + scm_wkup_pad_conf: scm_conf@0 {
> + compatible = "syscon", "simple-bus";
> + reg = <0x0 0x60>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0x0 0x60>;
> +
> + scm_wkup_pad_conf_clocks: clocks@0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + };
> + };
> + };
> + };
> +
> + segment@10000 { /* 0x4ae10000 */
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x00000000 0x00010000 0x001000>, /* ap 5 */
> + <0x00001000 0x00011000 0x001000>, /* ap 6 */
> + <0x00004000 0x00014000 0x001000>, /* ap 7 */
> + <0x00005000 0x00015000 0x001000>, /* ap 8 */
> + <0x00008000 0x00018000 0x001000>, /* ap 9 */
> + <0x00009000 0x00019000 0x001000>, /* ap 10 */
> + <0x0000c000 0x0001c000 0x001000>, /* ap 11 */
> + <0x0000d000 0x0001d000 0x001000>; /* ap 12 */
> +
> + target-module@0 { /* 0x4ae10000, ap 5 10.0 */
> + compatible = "ti,sysc-omap2", "ti,sysc";
> + ti,hwmods = "gpio1";
> + reg = <0x0 0x4>,
> + <0x10 0x4>,
> + <0x114 0x4>;
> + reg-names = "rev", "sysc", "syss";
> + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
> + SYSC_OMAP2_SOFTRESET |
> + SYSC_OMAP2_AUTOIDLE)>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>,
> + <SYSC_IDLE_SMART_WKUP>;
> + ti,syss-mask = <1>;
> + /* Domains (V, P, C): wkup, wkupaon_pwrdm, wkupaon_clkdm */
> + clocks = <&wkupaon_clkctrl OMAP5_GPIO1_CLKCTRL 0>,
> + <&wkupaon_clkctrl OMAP5_GPIO1_CLKCTRL 8>;
> + clock-names = "fck", "dbclk";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x0 0x1000>;
> +
> + gpio1: gpio@0 {
> + compatible = "ti,omap4-gpio";
> + reg = <0x0 0x200>;
> + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
> + ti,gpio-always-on;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> + };
> +
> + target-module@4000 { /* 0x4ae14000, ap 7 14.0 */
> + compatible = "ti,sysc-omap2", "ti,sysc";
> + ti,hwmods = "wd_timer2";
> + reg = <0x4000 0x4>,
> + <0x4010 0x4>,
> + <0x4014 0x4>;
> + reg-names = "rev", "sysc", "syss";
> + ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
> + SYSC_OMAP2_SOFTRESET)>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>,
> + <SYSC_IDLE_SMART_WKUP>;
> + ti,syss-mask = <1>;
> + /* Domains (V, P, C): wkup, wkupaon_pwrdm, wkupaon_clkdm */
> + clocks = <&wkupaon_clkctrl OMAP5_WD_TIMER2_CLKCTRL 0>;
> + clock-names = "fck";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x4000 0x1000>;
> +
> + wdt2: wdt@0 {
> + compatible = "ti,omap5-wdt", "ti,omap3-wdt";
> + reg = <0x0 0x80>;
> + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
> + };
> + };
> +
> + target-module@8000 { /* 0x4ae18000, ap 9 18.0 */
> + compatible = "ti,sysc-omap4-timer", "ti,sysc";
> + ti,hwmods = "timer1";
> + reg = <0x8000 0x4>,
> + <0x8010 0x4>;
> + reg-names = "rev", "sysc";
> + ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
> + SYSC_OMAP4_SOFTRESET)>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>,
> + <SYSC_IDLE_SMART_WKUP>;
> + /* Domains (V, P, C): wkup, wkupaon_pwrdm, wkupaon_clkdm */
> + clocks = <&wkupaon_clkctrl OMAP5_TIMER1_CLKCTRL 0>;
> + clock-names = "fck";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x8000 0x1000>;
> +
> + timer1: timer@0 {
> + compatible = "ti,omap5430-timer";
> + reg = <0x0 0x80>;
> + clocks = <&wkupaon_clkctrl OMAP5_TIMER1_CLKCTRL 24>;
> + clock-names = "fck";
> + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
> + ti,timer-alwon;
> + };
> + };
> +
> + target-module@c000 { /* 0x4ae1c000, ap 11 1c.0 */
> + compatible = "ti,sysc-omap2", "ti,sysc";
> + ti,hwmods = "kbd";
> + reg = <0xc000 0x4>,
> + <0xc010 0x4>;
> + reg-names = "rev", "sysc";
> + ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
> + SYSC_OMAP2_SOFTRESET)>;
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>;
> + /* Domains (V, P, C): wkup, wkupaon_pwrdm, wkupaon_clkdm */
> + clocks = <&wkupaon_clkctrl OMAP5_KBD_CLKCTRL 0>;
> + clock-names = "fck";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0xc000 0x1000>;
> +
> + keypad: keypad@0 {
> + compatible = "ti,omap4-keypad";
> + reg = <0x0 0x400>;
> + };
> + };
> + };
> +
> + segment@20000 { /* 0x4ae20000 */
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x00006000 0x00026000 0x001000>, /* ap 13 */
> + <0x0000a000 0x0002a000 0x001000>, /* ap 14 */
> + <0x00000000 0x00020000 0x001000>, /* ap 21 */
> + <0x00001000 0x00021000 0x001000>, /* ap 22 */
> + <0x00002000 0x00022000 0x001000>, /* ap 23 */
> + <0x00003000 0x00023000 0x001000>, /* ap 24 */
> + <0x00007000 0x00027000 0x000400>, /* ap 25 */
> + <0x00008000 0x00028000 0x000800>, /* ap 26 */
> + <0x00009000 0x00029000 0x000100>, /* ap 27 */
> + <0x00008800 0x00028800 0x000200>, /* ap 28 */
> + <0x00008a00 0x00028a00 0x000100>; /* ap 29 */
> +
> + target-module@0 { /* 0x4ae20000, ap 21 04.0 */
> + compatible = "ti,sysc";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x0 0x1000>;
> + };
> +
> + target-module@2000 { /* 0x4ae22000, ap 23 0c.0 */
> + compatible = "ti,sysc";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x2000 0x1000>;
> + };
> +
> + target-module@6000 { /* 0x4ae26000, ap 13 24.0 */
> + compatible = "ti,sysc";
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x00000000 0x00006000 0x00001000>,
> + <0x00001000 0x00007000 0x00000400>,
> + <0x00002000 0x00008000 0x00000800>,
> + <0x00002800 0x00008800 0x00000200>,
> + <0x00002a00 0x00008a00 0x00000100>,
> + <0x00003000 0x00009000 0x00000100>;
> + };
> + };
> +};
> +
> diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
> --- a/arch/arm/boot/dts/omap5.dtsi
> +++ b/arch/arm/boot/dts/omap5.dtsi
> @@ -7,6 +7,7 @@
> * Based on "omap4.dtsi"
> */
>
> +#include <dt-bindings/bus/ti-sysc.h>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> #include <dt-bindings/pinctrl/omap.h>
> @@ -151,178 +152,13 @@
> interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
>
> - l4_cfg: l4@4a000000 {
> - compatible = "ti,omap5-l4-cfg", "simple-bus";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges = <0 0x4a000000 0x22a000>;
> -
> - scm_core: scm@2000 {
> - compatible = "ti,omap5-scm-core", "simple-bus";
> - reg = <0x2000 0x1000>;
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges = <0 0x2000 0x800>;
> -
> - scm_conf: scm_conf@0 {
> - compatible = "syscon";
> - reg = <0x0 0x800>;
> - #address-cells = <1>;
> - #size-cells = <1>;
> - };
> - };
> -
> - scm_padconf_core: scm@2800 {
> - compatible = "ti,omap5-scm-padconf-core",
> - "simple-bus";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges = <0 0x2800 0x800>;
> -
> - omap5_pmx_core: pinmux@40 {
> - compatible = "ti,omap5-padconf",
> - "pinctrl-single";
> - reg = <0x40 0x01b6>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - #pinctrl-cells = <1>;
> - #interrupt-cells = <1>;
> - interrupt-controller;
> - pinctrl-single,register-width = <16>;
> - pinctrl-single,function-mask = <0x7fff>;
> - };
> -
> - omap5_padconf_global: omap5_padconf_global@5a0 {
> - compatible = "syscon",
> - "simple-bus";
> - reg = <0x5a0 0xec>;
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges = <0 0x5a0 0xec>;
> -
> - pbias_regulator: pbias_regulator@60 {
> - compatible = "ti,pbias-omap5", "ti,pbias-omap";
> - reg = <0x60 0x4>;
> - syscon = <&omap5_padconf_global>;
> - pbias_mmc_reg: pbias_mmc_omap5 {
> - regulator-name = "pbias_mmc_omap5";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <3300000>;
> - };
> - };
> - };
> - };
> -
> - cm_core_aon: cm_core_aon@4000 {
> - compatible = "ti,omap5-cm-core-aon",
> - "simple-bus";
> - reg = <0x4000 0x2000>;
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges = <0 0x4000 0x2000>;
> -
> - cm_core_aon_clocks: clocks {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - };
> -
> - cm_core_aon_clockdomains: clockdomains {
> - };
> - };
> -
> - cm_core: cm_core@8000 {
> - compatible = "ti,omap5-cm-core", "simple-bus";
> - reg = <0x8000 0x3000>;
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges = <0 0x8000 0x3000>;
> -
> - cm_core_clocks: clocks {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - };
> -
> - cm_core_clockdomains: clockdomains {
> - };
> - };
> + l4_wkup: interconnect@4ae00000 {
> };
>
> - l4_wkup: l4@4ae00000 {
> - compatible = "ti,omap5-l4-wkup", "simple-bus";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges = <0 0x4ae00000 0x2b000>;
> -
> - counter32k: counter@4000 {
> - compatible = "ti,omap-counter32k";
> - reg = <0x4000 0x40>;
> - ti,hwmods = "counter_32k";
> - };
> -
> - prm: prm@6000 {
> - compatible = "ti,omap5-prm", "simple-bus";
> - reg = <0x6000 0x3000>;
> - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges = <0 0x6000 0x3000>;
> -
> - prm_clocks: clocks {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - };
> -
> - prm_clockdomains: clockdomains {
> - };
> - };
> -
> - scrm: scrm@a000 {
> - compatible = "ti,omap5-scrm";
> - reg = <0xa000 0x2000>;
> -
> - scrm_clocks: clocks {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - };
> -
> - scrm_clockdomains: clockdomains {
> - };
> - };
> -
> - omap5_pmx_wkup: pinmux@c840 {
> - compatible = "ti,omap5-padconf",
> - "pinctrl-single";
> - reg = <0xc840 0x003c>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - #pinctrl-cells = <1>;
> - #interrupt-cells = <1>;
> - interrupt-controller;
> - pinctrl-single,register-width = <16>;
> - pinctrl-single,function-mask = <0x7fff>;
> - };
> -
> - omap5_scm_wkup_pad_conf: omap5_scm_wkup_pad_conf@cda0 {
> - compatible = "ti,omap5-scm-wkup-pad-conf",
> - "simple-bus";
> - reg = <0xcda0 0x60>;
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges = <0 0xcda0 0x60>;
> -
> - scm_wkup_pad_conf: scm_conf@0 {
> - compatible = "syscon", "simple-bus";
> - reg = <0x0 0x60>;
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges = <0 0x0 0x60>;
> + l4_cfg: interconnect@4a000000 {
> + };
>
> - scm_wkup_pad_conf_clocks: clocks@0 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - };
> - };
> - };
> + l4_per: interconnect@48000000 {
> };
>
> ocmcram: ocmcram@40300000 {
> @@ -330,108 +166,6 @@
> reg = <0x40300000 0x20000>; /* 128k */
> };
>
> - sdma: dma-controller@4a056000 {
> - compatible = "ti,omap4430-sdma";
> - reg = <0x4a056000 0x1000>;
> - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
> - #dma-cells = <1>;
> - dma-channels = <32>;
> - dma-requests = <127>;
> - ti,hwmods = "dma_system";
> - };
> -
> - gpio1: gpio@4ae10000 {
> - compatible = "ti,omap4-gpio";
> - reg = <0x4ae10000 0x200>;
> - interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
> - ti,hwmods = "gpio1";
> - ti,gpio-always-on;
> - gpio-controller;
> - #gpio-cells = <2>;
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - };
> -
> - gpio2: gpio@48055000 {
> - compatible = "ti,omap4-gpio";
> - reg = <0x48055000 0x200>;
> - interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
> - ti,hwmods = "gpio2";
> - gpio-controller;
> - #gpio-cells = <2>;
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - };
> -
> - gpio3: gpio@48057000 {
> - compatible = "ti,omap4-gpio";
> - reg = <0x48057000 0x200>;
> - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
> - ti,hwmods = "gpio3";
> - gpio-controller;
> - #gpio-cells = <2>;
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - };
> -
> - gpio4: gpio@48059000 {
> - compatible = "ti,omap4-gpio";
> - reg = <0x48059000 0x200>;
> - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> - ti,hwmods = "gpio4";
> - gpio-controller;
> - #gpio-cells = <2>;
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - };
> -
> - gpio5: gpio@4805b000 {
> - compatible = "ti,omap4-gpio";
> - reg = <0x4805b000 0x200>;
> - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> - ti,hwmods = "gpio5";
> - gpio-controller;
> - #gpio-cells = <2>;
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - };
> -
> - gpio6: gpio@4805d000 {
> - compatible = "ti,omap4-gpio";
> - reg = <0x4805d000 0x200>;
> - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> - ti,hwmods = "gpio6";
> - gpio-controller;
> - #gpio-cells = <2>;
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - };
> -
> - gpio7: gpio@48051000 {
> - compatible = "ti,omap4-gpio";
> - reg = <0x48051000 0x200>;
> - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
> - ti,hwmods = "gpio7";
> - gpio-controller;
> - #gpio-cells = <2>;
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - };
> -
> - gpio8: gpio@48053000 {
> - compatible = "ti,omap4-gpio";
> - reg = <0x48053000 0x200>;
> - interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
> - ti,hwmods = "gpio8";
> - gpio-controller;
> - #gpio-cells = <2>;
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - };
> -
> gpmc: gpmc@50000000 {
> compatible = "ti,omap4430-gpmc";
> reg = <0x50000000 0x1000>;
> @@ -451,217 +185,6 @@
> #gpio-cells = <2>;
> };
>
> - i2c1: i2c@48070000 {
> - compatible = "ti,omap4-i2c";
> - reg = <0x48070000 0x100>;
> - interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - ti,hwmods = "i2c1";
> - };
> -
> - i2c2: i2c@48072000 {
> - compatible = "ti,omap4-i2c";
> - reg = <0x48072000 0x100>;
> - interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - ti,hwmods = "i2c2";
> - };
> -
> - i2c3: i2c@48060000 {
> - compatible = "ti,omap4-i2c";
> - reg = <0x48060000 0x100>;
> - interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - ti,hwmods = "i2c3";
> - };
> -
> - i2c4: i2c@4807a000 {
> - compatible = "ti,omap4-i2c";
> - reg = <0x4807a000 0x100>;
> - interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - ti,hwmods = "i2c4";
> - };
> -
> - i2c5: i2c@4807c000 {
> - compatible = "ti,omap4-i2c";
> - reg = <0x4807c000 0x100>;
> - interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - ti,hwmods = "i2c5";
> - };
> -
> - hwspinlock: spinlock@4a0f6000 {
> - compatible = "ti,omap4-hwspinlock";
> - reg = <0x4a0f6000 0x1000>;
> - ti,hwmods = "spinlock";
> - #hwlock-cells = <1>;
> - };
> -
> - mcspi1: spi@48098000 {
> - compatible = "ti,omap4-mcspi";
> - reg = <0x48098000 0x200>;
> - interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - ti,hwmods = "mcspi1";
> - ti,spi-num-cs = <4>;
> - dmas = <&sdma 35>,
> - <&sdma 36>,
> - <&sdma 37>,
> - <&sdma 38>,
> - <&sdma 39>,
> - <&sdma 40>,
> - <&sdma 41>,
> - <&sdma 42>;
> - dma-names = "tx0", "rx0", "tx1", "rx1",
> - "tx2", "rx2", "tx3", "rx3";
> - };
> -
> - mcspi2: spi@4809a000 {
> - compatible = "ti,omap4-mcspi";
> - reg = <0x4809a000 0x200>;
> - interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - ti,hwmods = "mcspi2";
> - ti,spi-num-cs = <2>;
> - dmas = <&sdma 43>,
> - <&sdma 44>,
> - <&sdma 45>,
> - <&sdma 46>;
> - dma-names = "tx0", "rx0", "tx1", "rx1";
> - };
> -
> - mcspi3: spi@480b8000 {
> - compatible = "ti,omap4-mcspi";
> - reg = <0x480b8000 0x200>;
> - interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - ti,hwmods = "mcspi3";
> - ti,spi-num-cs = <2>;
> - dmas = <&sdma 15>, <&sdma 16>;
> - dma-names = "tx0", "rx0";
> - };
> -
> - mcspi4: spi@480ba000 {
> - compatible = "ti,omap4-mcspi";
> - reg = <0x480ba000 0x200>;
> - interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - ti,hwmods = "mcspi4";
> - ti,spi-num-cs = <1>;
> - dmas = <&sdma 70>, <&sdma 71>;
> - dma-names = "tx0", "rx0";
> - };
> -
> - uart1: serial@4806a000 {
> - compatible = "ti,omap4-uart";
> - reg = <0x4806a000 0x100>;
> - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
> - ti,hwmods = "uart1";
> - clock-frequency = <48000000>;
> - };
> -
> - uart2: serial@4806c000 {
> - compatible = "ti,omap4-uart";
> - reg = <0x4806c000 0x100>;
> - interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
> - ti,hwmods = "uart2";
> - clock-frequency = <48000000>;
> - };
> -
> - uart3: serial@48020000 {
> - compatible = "ti,omap4-uart";
> - reg = <0x48020000 0x100>;
> - interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
> - ti,hwmods = "uart3";
> - clock-frequency = <48000000>;
> - };
> -
> - uart4: serial@4806e000 {
> - compatible = "ti,omap4-uart";
> - reg = <0x4806e000 0x100>;
> - interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
> - ti,hwmods = "uart4";
> - clock-frequency = <48000000>;
> - };
> -
> - uart5: serial@48066000 {
> - compatible = "ti,omap4-uart";
> - reg = <0x48066000 0x100>;
> - interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
> - ti,hwmods = "uart5";
> - clock-frequency = <48000000>;
> - };
> -
> - uart6: serial@48068000 {
> - compatible = "ti,omap4-uart";
> - reg = <0x48068000 0x100>;
> - interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
> - ti,hwmods = "uart6";
> - clock-frequency = <48000000>;
> - };
> -
> - mmc1: mmc@4809c000 {
> - compatible = "ti,omap4-hsmmc";
> - reg = <0x4809c000 0x400>;
> - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> - ti,hwmods = "mmc1";
> - ti,dual-volt;
> - ti,needs-special-reset;
> - dmas = <&sdma 61>, <&sdma 62>;
> - dma-names = "tx", "rx";
> - pbias-supply = <&pbias_mmc_reg>;
> - };
> -
> - mmc2: mmc@480b4000 {
> - compatible = "ti,omap4-hsmmc";
> - reg = <0x480b4000 0x400>;
> - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
> - ti,hwmods = "mmc2";
> - ti,needs-special-reset;
> - dmas = <&sdma 47>, <&sdma 48>;
> - dma-names = "tx", "rx";
> - };
> -
> - mmc3: mmc@480ad000 {
> - compatible = "ti,omap4-hsmmc";
> - reg = <0x480ad000 0x400>;
> - interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
> - ti,hwmods = "mmc3";
> - ti,needs-special-reset;
> - dmas = <&sdma 77>, <&sdma 78>;
> - dma-names = "tx", "rx";
> - };
> -
> - mmc4: mmc@480d1000 {
> - compatible = "ti,omap4-hsmmc";
> - reg = <0x480d1000 0x400>;
> - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
> - ti,hwmods = "mmc4";
> - ti,needs-special-reset;
> - dmas = <&sdma 57>, <&sdma 58>;
> - dma-names = "tx", "rx";
> - };
> -
> - mmc5: mmc@480d5000 {
> - compatible = "ti,omap4-hsmmc";
> - reg = <0x480d5000 0x400>;
> - interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
> - ti,hwmods = "mmc5";
> - ti,needs-special-reset;
> - dmas = <&sdma 59>, <&sdma 60>;
> - dma-names = "tx", "rx";
> - };
> -
> mmu_dsp: mmu@4a066000 {
> compatible = "ti,omap4-iommu";
> reg = <0x4a066000 0x100>;
> @@ -679,12 +202,6 @@
> ti,iommu-bus-err-back;
> };
>
> - keypad: keypad@4ae1c000 {
> - compatible = "ti,omap4-keypad";
> - reg = <0x4ae1c000 0x400>;
> - ti,hwmods = "kbd";
> - };
> -
> mcpdm: mcpdm@40132000 {
> compatible = "ti,omap4-mcpdm";
> reg = <0x40132000 0x7f>, /* MPU private access */
> @@ -755,55 +272,6 @@
> status = "disabled";
> };
>
> - mailbox: mailbox@4a0f4000 {
> - compatible = "ti,omap4-mailbox";
> - reg = <0x4a0f4000 0x200>;
> - interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
> - ti,hwmods = "mailbox";
> - #mbox-cells = <1>;
> - ti,mbox-num-users = <3>;
> - ti,mbox-num-fifos = <8>;
> - mbox_ipu: mbox_ipu {
> - ti,mbox-tx = <0 0 0>;
> - ti,mbox-rx = <1 0 0>;
> - };
> - mbox_dsp: mbox_dsp {
> - ti,mbox-tx = <3 0 0>;
> - ti,mbox-rx = <2 0 0>;
> - };
> - };
> -
> - timer1: timer@4ae18000 {
> - compatible = "ti,omap5430-timer";
> - reg = <0x4ae18000 0x80>;
> - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
> - ti,hwmods = "timer1";
> - ti,timer-alwon;
> - clocks = <&wkupaon_clkctrl OMAP5_TIMER1_CLKCTRL 24>;
> - clock-names = "fck";
> - };
> -
> - timer2: timer@48032000 {
> - compatible = "ti,omap5430-timer";
> - reg = <0x48032000 0x80>;
> - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
> - ti,hwmods = "timer2";
> - };
> -
> - timer3: timer@48034000 {
> - compatible = "ti,omap5430-timer";
> - reg = <0x48034000 0x80>;
> - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
> - ti,hwmods = "timer3";
> - };
> -
> - timer4: timer@48036000 {
> - compatible = "ti,omap5430-timer";
> - reg = <0x48036000 0x80>;
> - interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
> - ti,hwmods = "timer4";
> - };
> -
> timer5: timer@40138000 {
> compatible = "ti,omap5430-timer";
> reg = <0x40138000 0x80>,
> @@ -843,37 +311,6 @@
> ti,timer-pwm;
> };
>
> - timer9: timer@4803e000 {
> - compatible = "ti,omap5430-timer";
> - reg = <0x4803e000 0x80>;
> - interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
> - ti,hwmods = "timer9";
> - ti,timer-pwm;
> - };
> -
> - timer10: timer@48086000 {
> - compatible = "ti,omap5430-timer";
> - reg = <0x48086000 0x80>;
> - interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
> - ti,hwmods = "timer10";
> - ti,timer-pwm;
> - };
> -
> - timer11: timer@48088000 {
> - compatible = "ti,omap5430-timer";
> - reg = <0x48088000 0x80>;
> - interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
> - ti,hwmods = "timer11";
> - ti,timer-pwm;
> - };
> -
> - wdt2: wdt@4ae14000 {
> - compatible = "ti,omap5-wdt", "ti,omap3-wdt";
> - reg = <0x4ae14000 0x80>;
> - interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
> - ti,hwmods = "wd_timer2";
> - };
> -
> dmm@4e000000 {
> compatible = "ti,omap5-dmm";
> reg = <0x4e000000 0x800>;
> @@ -905,99 +342,6 @@
> hw-caps-temp-alert;
> };
>
> - usb3: omap_dwc3@4a020000 {
> - compatible = "ti,dwc3";
> - ti,hwmods = "usb_otg_ss";
> - reg = <0x4a020000 0x10000>;
> - interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
> - #address-cells = <1>;
> - #size-cells = <1>;
> - utmi-mode = <2>;
> - ranges;
> - dwc3: dwc3@4a030000 {
> - compatible = "snps,dwc3";
> - reg = <0x4a030000 0x10000>;
> - interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-names = "peripheral",
> - "host",
> - "otg";
> - phys = <&usb2_phy>, <&usb3_phy>;
> - phy-names = "usb2-phy", "usb3-phy";
> - dr_mode = "peripheral";
> - };
> - };
> -
> - ocp2scp@4a080000 {
> - compatible = "ti,omap-ocp2scp";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - reg = <0x4a080000 0x20>;
> - ranges;
> - ti,hwmods = "ocp2scp1";
> - usb2_phy: usb2phy@4a084000 {
> - compatible = "ti,omap-usb2";
> - reg = <0x4a084000 0x7c>;
> - syscon-phy-power = <&scm_conf 0x300>;
> - clocks = <&usb_phy_cm_clk32k>,
> - <&l3init_clkctrl OMAP5_USB_OTG_SS_CLKCTRL 8>;
> - clock-names = "wkupclk", "refclk";
> - #phy-cells = <0>;
> - };
> -
> - usb3_phy: usb3phy@4a084400 {
> - compatible = "ti,omap-usb3";
> - reg = <0x4a084400 0x80>,
> - <0x4a084800 0x64>,
> - <0x4a084c00 0x40>;
> - reg-names = "phy_rx", "phy_tx", "pll_ctrl";
> - syscon-phy-power = <&scm_conf 0x370>;
> - clocks = <&usb_phy_cm_clk32k>,
> - <&sys_clkin>,
> - <&l3init_clkctrl OMAP5_USB_OTG_SS_CLKCTRL 8>;
> - clock-names = "wkupclk",
> - "sysclk",
> - "refclk";
> - #phy-cells = <0>;
> - };
> - };
> -
> - usbhstll: usbhstll@4a062000 {
> - compatible = "ti,usbhs-tll";
> - reg = <0x4a062000 0x1000>;
> - interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
> - ti,hwmods = "usb_tll_hs";
> - };
> -
> - usbhshost: usbhshost@4a064000 {
> - compatible = "ti,usbhs-host";
> - reg = <0x4a064000 0x800>;
> - ti,hwmods = "usb_host_hs";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges;
> - clocks = <&l3init_60m_fclk>,
> - <&xclk60mhsp1_ck>,
> - <&xclk60mhsp2_ck>;
> - clock-names = "refclk_60m_int",
> - "refclk_60m_ext_p1",
> - "refclk_60m_ext_p2";
> -
> - usbhsohci: ohci@4a064800 {
> - compatible = "ti,ohci-omap3";
> - reg = <0x4a064800 0x400>;
> - interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
> - remote-wakeup-connected;
> - };
> -
> - usbhsehci: ehci@4a064c00 {
> - compatible = "ti,ehci-omap";
> - reg = <0x4a064c00 0x400>;
> - interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
> - };
> - };
> -
> bandgap: bandgap@4a0021e0 {
> reg = <0x4a0021e0 0xc
> 0x4a00232c 0xc
> @@ -1010,27 +354,6 @@
> };
>
> /* OCP2SCP3 */
> - ocp2scp@4a090000 {
> - compatible = "ti,omap-ocp2scp";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - reg = <0x4a090000 0x20>;
> - ranges;
> - ti,hwmods = "ocp2scp3";
> - sata_phy: phy@4a096000 {
> - compatible = "ti,phy-pipe3-sata";
> - reg = <0x4A096000 0x80>, /* phy_rx */
> - <0x4A096400 0x64>, /* phy_tx */
> - <0x4A096800 0x40>; /* pll_ctrl */
> - reg-names = "phy_rx", "phy_tx", "pll_ctrl";
> - syscon-phy-power = <&scm_conf 0x374>;
> - clocks = <&sys_clkin>,
> - <&l3init_clkctrl OMAP5_SATA_CLKCTRL 8>;
> - clock-names = "sysclk", "refclk";
> - #phy-cells = <0>;
> - };
> - };
> -
> sata: sata@4a141100 {
> compatible = "snps,dwc-ahci";
> reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
> @@ -1184,6 +507,7 @@
> coefficients = <65 (-1791)>;
> };
>
> +#include "omap5-l4.dtsi"
> #include "omap54xx-clocks.dtsi"
>
> &gpu_thermal {
>

- PÃter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

Next message: Chao Yu: "[PATCH 1/3] f2fs: fix to reorder set_page_dirty and wait_on_page_writeback"
Previous message: Jan Kara: "Re: [PATCH 2/3] filemap: pass vm_fault to the mmap ra helpers"
Next in thread: Peter Ujfalusi: "Re: [PATCH] ARM: dts: omap5: Add l4 interconnect hierarchy and ti-sysc data"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]