Re: [PATCH V5 1/2] dt-bindings: iio: light: isl29018: update power supply name

[Jonathan Cameron]

On Tue, 11 Dec 2018 05:02:39 +0000
Anson Huang <anson.huang@xxxxxxx> wrote:

> According to datasheet, the isl29018 has "vddd/vdda" power
> supply, the "vdda" and "vddd" MUST be shorted externally,
> and isl29023/isl29035 ONLY has "vdd" power supply, so just
> one regulator is needed for the driver, update the power
> supply name with "vdd" according to datasheet to avoid
> confusion.
> 
> Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
Given the discussion on v4 I am assuming this should be dropped.
Shout if I'm missing something.

Jonathan

> ---
> ChangeLog since V4:
> 	Since ONLY isl29018 has two power supplies and they are MUST shorted externally, so they can be
> 	treated as one power supply as well, remove "vdda" power supply and ONLY update the "vcc" with
> 	"vdd" according to datasheet.
> ---
>  Documentation/devicetree/bindings/iio/light/isl29018.txt | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/iio/light/isl29018.txt b/Documentation/devicetree/bindings/iio/light/isl29018.txt
> index b9bbde3..c4c4e9e 100644
> --- a/Documentation/devicetree/bindings/iio/light/isl29018.txt
> +++ b/Documentation/devicetree/bindings/iio/light/isl29018.txt
> @@ -15,7 +15,7 @@ Optional properties:
>    Refer to interrupt-controller/interrupts.txt for generic interrupt client
>    node bindings.
>  
> -  - vcc-supply: phandle to the regulator that provides power to the sensor.
> +  - vdd-supply: phandle to the regulator that provides power to the sensor.
>  
>  Example:
>