[PATCH v4] Staging: iio: adt7316: Add all irq related code in adt7316_irq_setup()

[Shreeya Patel]

ADT7316 driver no more uses platform data and hence use device tree
data instead of platform data for assigning irq_type field and
implement this in adt7316_irq_setup function.
Switch case figures out the type of irq and if it's the default case
then assign the default value to the irq_type i.e.
irq_type = IRQF_TRIGGER_LOW
Move devm_request_threaded_irq() and assignment of chip->config1
into the adt7316_setup_irq() to unclutter the code in probe function.

Signed-off-by: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
---
Changes in v4
  - Merge patches *[1/3 v3], *[2/3 v3] and *[3/3 v3] to make it less
complex to review.

Changes in v3
  - Add a new function for having all interrupt related code.

Changes in v2
  - Make the commit message of patch *[1/5] appropriate.


 drivers/staging/iio/addac/adt7316.c | 52 +++++++++++++++++++++--------
 1 file changed, 38 insertions(+), 14 deletions(-)

diff --git a/drivers/staging/iio/addac/adt7316.c b/drivers/staging/iio/addac/adt7316.c
index 9c72538baf9e..1ca4ee0f30ee 100644
--- a/drivers/staging/iio/addac/adt7316.c
+++ b/drivers/staging/iio/addac/adt7316.c
@@ -1807,6 +1807,43 @@ static irqreturn_t adt7316_event_handler(int irq, void *private)
 	return IRQ_HANDLED;
 }
 
+static int adt7316_setup_irq(struct iio_dev *indio_dev)
+{
+	struct adt7316_chip_info *chip = iio_priv(indio_dev);
+	int irq_type, ret;
+
+	irq_type = irqd_get_trigger_type(irq_get_irq_data(chip->bus.irq));
+
+	switch (irq_type) {
+	case IRQF_TRIGGER_HIGH:
+	case IRQF_TRIGGER_RISING:
+		break;
+	case IRQF_TRIGGER_LOW:
+	case IRQF_TRIGGER_FALLING:
+		break;
+	default:
+		dev_info(&indio_dev->dev, "mode %d unsupported, using IRQF_TRIGGER_LOW\n",
+			 irq_type);
+		irq_type = IRQF_TRIGGER_LOW;
+		break;
+	}
+
+	ret = devm_request_threaded_irq(&indio_dev->dev, chip->bus.irq,
+					NULL, adt7316_event_handler,
+					irq_type | IRQF_ONESHOT,
+					indio_dev->name, indio_dev);
+	if (ret) {
+		dev_err(&indio_dev->dev, "failed to request irq %d\n",
+			chip->bus.irq);
+		return ret;
+	}
+
+	if (irq_type & IRQF_TRIGGER_HIGH)
+		chip->config1 |= ADT7316_INT_POLARITY;
+
+	return 0;
+}
+
 /*
  * Show mask of enabled interrupts in Hex.
  */
@@ -2101,8 +2138,6 @@ int adt7316_probe(struct device *dev, struct adt7316_bus *bus,
 {
 	struct adt7316_chip_info *chip;
 	struct iio_dev *indio_dev;
-	unsigned short *adt7316_platform_data = dev->platform_data;
-	int irq_type = IRQF_TRIGGER_LOW;
 	int ret = 0;
 
 	indio_dev = devm_iio_device_alloc(dev, sizeof(*chip));
@@ -2146,20 +2181,9 @@ int adt7316_probe(struct device *dev, struct adt7316_bus *bus,
 	indio_dev->modes = INDIO_DIRECT_MODE;
 
 	if (chip->bus.irq > 0) {
-		if (adt7316_platform_data[0])
-			irq_type = adt7316_platform_data[0];
-
-		ret = devm_request_threaded_irq(dev, chip->bus.irq,
-						NULL,
-						adt7316_event_handler,
-						irq_type | IRQF_ONESHOT,
-						indio_dev->name,
-						indio_dev);
+		ret = adt7316_setup_irq(indio_dev);
 		if (ret)
 			return ret;
-
-		if (irq_type & IRQF_TRIGGER_HIGH)
-			chip->config1 |= ADT7316_INT_POLARITY;
 	}
 
 	ret = chip->bus.write(chip->bus.client, ADT7316_CONFIG1, chip->config1);
-- 
2.17.1