[PATCH] media: dt-bindings: rcar-vin: Add R8A774C0 support

From: Fabrizio Castro
Date: Thu Dec 13 2018 - 15:27:12 EST


Add the compatible string for RZ/G2E (a.k.a. R8A774C0) to the list
of SoCs supported by rcar-vin driver.

Signed-off-by: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/media/rcar_vin.txt | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt b/Documentation/devicetree/bindings/media/rcar_vin.txt
index 7c878ca..34dcd28 100644
--- a/Documentation/devicetree/bindings/media/rcar_vin.txt
+++ b/Documentation/devicetree/bindings/media/rcar_vin.txt
@@ -7,12 +7,13 @@ family of devices.
Each VIN instance has a single parallel input that supports RGB and YUV video,
with both external synchronization and BT.656 synchronization for the latter.
Depending on the instance the VIN input is connected to external SoC pins, or
-on Gen3 platforms to a CSI-2 receiver.
+on Gen3 and RZ/G2 platforms to a CSI-2 receiver.

- compatible: Must be one or more of the following
- "renesas,vin-r8a7743" for the R8A7743 device
- "renesas,vin-r8a7744" for the R8A7744 device
- "renesas,vin-r8a7745" for the R8A7745 device
+ - "renesas,vin-r8a774c0" for the R8A774C0 device
- "renesas,vin-r8a7778" for the R8A7778 device
- "renesas,vin-r8a7779" for the R8A7779 device
- "renesas,vin-r8a7790" for the R8A7790 device
@@ -60,10 +61,10 @@ The per-board settings Gen2 platforms:
- data-enable-active: polarity of CLKENB signal, see [1] for
description. Default is active high.

-The per-board settings Gen3 platforms:
+The per-board settings Gen3 and RZ/G2 platforms:

-Gen3 platforms can support both a single connected parallel input source
-from external SoC pins (port@0) and/or multiple parallel input sources
+Gen3 and RZ/G2 platforms can support both a single connected parallel input
+source from external SoC pins (port@0) and/or multiple parallel input sources
from local SoC CSI-2 receivers (port@1) depending on SoC.

- renesas,id - ID number of the VIN, VINx in the documentation.
--
2.7.4