Re: [PATCH] arm64: dts: qcom: sdm845: Add Q6V5 MSS node

[Sibi Sankar]

Hi Doug,
Thanks for the review!

On 2018-12-14 03:47, Doug Anderson wrote:
> Hi,
>
> On Tue, Nov 27, 2018 at 12:58 AM Sibi Sankar <sibis@xxxxxxxxxxxxxx> 
> wrote:
> > This patch adds Q6V5 MSS remoteproc node for SDM845 SoCs.
> >
> > Signed-off-by: Sibi Sankar <sibis@xxxxxxxxxxxxxx>
> > ---
> >
> > The remoteproc mss node depends on the following bindings:
> > https://patchwork.kernel.org/patch/10490559/ - rpmhp dt bindings
>
> This is an older version of the patch.  Now at v7 at
> <https://patchwork.kernel.org/patch/10725801/>
>
>
> > https://patchwork.kernel.org/patch/10678301/ - AOP QMP dt bindings
> > https://patchwork.kernel.org/patch/10691215/ - mss power-domain dt 
> > bindings
> > https://patchwork.kernel.org/patch/10691213/ - shutdown-ack dt 
> > bindings
> >
> > It also depends on the mpss and mba memory regions and pdc reset node.
> > https://patchwork.kernel.org/patch/10662089/
> > https://patchwork.kernel.org/patch/10657325/
> >
> >  arch/arm64/boot/dts/qcom/sdm845.dtsi | 63 
> > ++++++++++++++++++++++++++++
> >  1 file changed, 63 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi 
> > b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> > index 58870273dbc9..df16ee464872 100644
> > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> > @@ -1095,6 +1095,69 @@
> >                         };
> >                 };
> >
> > +               remoteproc@4080000 {
> > +                       compatible = "qcom,sdm845-mss-pil";
> > +                       reg = <0x04080000 0x408>, <0x04180000 0x48>;
>
> s/0x04080000/0x4080000 to appease the DT folks.

as you said in the other thread will leave the
padding untouched

> > +                       reg-names = "qdsp6", "rmb";
> > +
> > +                       interrupts-extended =
> > +                               <&intc GIC_SPI 266 
> > IRQ_TYPE_EDGE_RISING>,
> > +                               <&modem_smp2p_in 0 
> > IRQ_TYPE_EDGE_RISING>,
> > +                               <&modem_smp2p_in 1 
> > IRQ_TYPE_EDGE_RISING>,
> > +                               <&modem_smp2p_in 2 
> > IRQ_TYPE_EDGE_RISING>,
> > +                               <&modem_smp2p_in 3 
> > IRQ_TYPE_EDGE_RISING>,
> > +                               <&modem_smp2p_in 7 
> > IRQ_TYPE_EDGE_RISING>;
> > +
> > +                       interrupt-names = "wdog", "fatal", "ready",
> > +                                         "handover", "stop-ack",
> > +                                         "shutdown-ack";
>
> nit: maybe remove blank line between "interrupts-extended" and
> "interrupt-names".  Nice to keep -names close to the things they're
> naming.

sure will do that.. I guess I'll have to remove
the blank line in clock-names as well

> > +                       clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
> > +                                <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>,
> > +                                <&gcc GCC_BOOT_ROM_AHB_CLK>,
> > +                                <&gcc GCC_MSS_GPLL0_DIV_CLK_SRC>,
> > +                                <&gcc GCC_MSS_SNOC_AXI_CLK>,
> > +                                <&gcc GCC_MSS_MFAB_AXIS_CLK>,
> > +                                <&gcc GCC_PRNG_AHB_CLK>,
> > +                                <&rpmhcc RPMH_CXO_CLK>;
> > +
> > +                       clock-names = "iface", "bus", "mem", 
> > "gpll0_mss",
> > +                                     "snoc_axi", "mnoc_axi", "prng", 
> > "xo";
>
> Bindings list clock-names as "iface", "bus", "mem".  You have "iface",
> "bus", "mem", "gpll0_mss", "snoc_axi", "mnoc_axi", "prng", "xo".  It
> looks like these extra clocks were added in commit 231f67d1fb2f
> ("remoteproc: q6v5: Add support for mss remoteproc on SDM845") but you
> forgot to update the bindings.  Looking in that patch I also see an
> "axis2" which you seem to be missing.  Do you need it?

yes missed adding them..will add them in the next respin

> > +                       qcom,smem-states = <&modem_smp2p_out 0>;
> > +                       qcom,smem-state-names = "stop";
> > +
> > +                       resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
> > +                                <&pdc_reset PDC_MODEM_SYNC_RESET>;
> > +                       reset-names = "mss_restart", "pdc_reset";
> > +
> > +                       qcom,halt-regs = <&tcsr_mutex_regs
> > +                                               0x23000 0x25000 
> > 0x24000>;
> > +
> > +                       power-domains = <&aoss_qmp_pd 
> > AOSS_QMP_LS_MODEM>,
> > +                                       <&rpmhpd SDM845_CX>,
> > +                                       <&rpmhpd SDM845_MX>,
> > +                                       <&rpmhpd SDM845_MSS>;
> > +                       power-domain-names = "aop", "cx", "mx", "mss";
> > +
> > +                       mba {
> > +                               memory-region = <&mba_region>;
> > +                       };
> > +
> > +                       mpss {
> > +                               memory-region = <&mpss_region>;
> > +                       };
> > +
> > +                       glink-edge {
> > +                               interrupts = <GIC_SPI 449 
> > IRQ_TYPE_EDGE_RISING>;
> > +                               label = "modem";
> > +                               qcom,remote-pid = <1>;
>
> The "qcom,remote-pid" property isn't documented for "glink-edge".  Do
> you need it?  ...if you do, please send a patch to update the
> bindings.

yes glink seems to be missing the remote-pid..
I will add that as well in v2

> -Doug

--
-- Sibi Sankar --
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project.