[PATCH 0/2] Add board support for Chameleon96 Board
From: Manivannan Sadhasivam
Date: Fri Dec 14 2018 - 22:02:28 EST
Hello,
This patchset adds board support for Chameleon96 board from Novetech
based on Intel Cyclone V SoC FPGA. This board is one of the Consumer
Edition boards of the 96Boards family and has the following key features:
* SoC - Intel Cyclone V SoC FPGA
* GPU - Graphics based on Intel Video Suite for FPGA
* RAM - 512MB DDR3L
* USB - 2x USB2.0 Host, 1x USB2.0 OTG
* Wireless - Wifi, BT
More information about this board can be found in 96Boards product
page: https://www.96boards.org/product/chameleon96/
This patchset has been tested on Chameleon96 board and the board boots
into a distro on SD card with USB ports working.
Thanks,
Mani
Manivannan Sadhasivam (2):
dt-bindings: vendor-prefixes: Add Novtech Vendor Prefix
ARM: dts: Add support for 96Boards Chameleon96 board
.../devicetree/bindings/vendor-prefixes.txt | 1 +
arch/arm/boot/dts/Makefile | 1 +
.../boot/dts/socfpga_cyclone5_chameleon96.dts | 130 ++++++++++++++++++
3 files changed, 132 insertions(+)
create mode 100644 arch/arm/boot/dts/socfpga_cyclone5_chameleon96.dts
--
2.17.1