[PATCH] ASoC: sdm845: set jack only for a specific backend
From: Rohit kumar
Date: Fri Dec 14 2018 - 05:01:43 EST
Headset codec is connected over PRIMARY_MI2S interface. Call
set_jack for codec associated with Primary Mi2s interface.
Also, set_jack to NULL when jack is freed.
Signed-off-by: Rohit kumar <rohitkr@xxxxxxxxxxxxxx>
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
---
sound/soc/qcom/sdm845.c | 31 ++++++++++++++++++++++---------
1 file changed, 22 insertions(+), 9 deletions(-)
diff --git a/sound/soc/qcom/sdm845.c b/sound/soc/qcom/sdm845.c
index 1db8ef668223..6f66a58e23ca 100644
--- a/sound/soc/qcom/sdm845.c
+++ b/sound/soc/qcom/sdm845.c
@@ -158,17 +158,24 @@ static int sdm845_snd_hw_params(struct snd_pcm_substream *substream,
return ret;
}
+static void sdm845_jack_free(struct snd_jack *jack)
+{
+ struct snd_soc_component *component = jack->private_data;
+
+ snd_soc_component_set_jack(component, NULL, NULL);
+}
+
static int sdm845_dai_init(struct snd_soc_pcm_runtime *rtd)
{
struct snd_soc_component *component;
- struct snd_soc_dai_link *dai_link = rtd->dai_link;
struct snd_soc_card *card = rtd->card;
+ struct snd_soc_dai *codec_dai = rtd->codec_dai;
+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
struct sdm845_snd_data *pdata = snd_soc_card_get_drvdata(card);
- int i, rval;
+ struct snd_jack *jack;
+ int rval;
if (!pdata->jack_setup) {
- struct snd_jack *jack;
-
rval = snd_soc_card_jack_new(card, "Headset Jack",
SND_JACK_HEADSET |
SND_JACK_HEADPHONE |
@@ -190,16 +197,22 @@ static int sdm845_dai_init(struct snd_soc_pcm_runtime *rtd)
pdata->jack_setup = true;
}
- for (i = 0 ; i < dai_link->num_codecs; i++) {
- struct snd_soc_dai *dai = rtd->codec_dais[i];
+ switch (cpu_dai->id) {
+ case PRIMARY_MI2S_RX:
+ jack = pdata->jack.jack;
+ component = codec_dai->component;
- component = dai->component;
- rval = snd_soc_component_set_jack(
- component, &pdata->jack, NULL);
+ jack->private_data = component;
+ jack->private_free = sdm845_jack_free;
+ rval = snd_soc_component_set_jack(component,
+ &pdata->jack, NULL);
if (rval != 0 && rval != -ENOTSUPP) {
dev_warn(card->dev, "Failed to set jack: %d\n", rval);
return rval;
}
+ break;
+ default:
+ break;
}
return 0;
--
2.19.0.rc2