[PATCH 13/25] clocksource/drivers/timer-imx-tpm: Convert the driver to timer-of
From: Daniel Lezcano
Date: Tue Dec 18 2018 - 16:30:35 EST
From: Anson Huang <anson.huang@xxxxxxx>
Convert the driver to use the timer_of helpers. This allows to handle
timer base, clock and irq using common timer_of driver and it
simplifies the code.
Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
Signed-off-by: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
---
drivers/clocksource/timer-imx-tpm.c | 136 +++++++++++-----------------
1 file changed, 55 insertions(+), 81 deletions(-)
diff --git a/drivers/clocksource/timer-imx-tpm.c b/drivers/clocksource/timer-imx-tpm.c
index b7aa2b817078..c3dd4d2f2a6e 100644
--- a/drivers/clocksource/timer-imx-tpm.c
+++ b/drivers/clocksource/timer-imx-tpm.c
@@ -12,6 +12,8 @@
#include <linux/of_irq.h>
#include <linux/sched_clock.h>
+#include "timer-of.h"
+
#define TPM_PARAM 0x4
#define TPM_PARAM_WIDTH_SHIFT 16
#define TPM_PARAM_WIDTH_MASK (0xff << 16)
@@ -33,9 +35,7 @@
#define TPM_C0V 0x24
static int counter_width;
-static int rating;
static void __iomem *timer_base;
-static struct clock_event_device clockevent_tpm;
static inline void tpm_timer_disable(void)
{
@@ -80,19 +80,6 @@ static u64 notrace tpm_read_sched_clock(void)
return tpm_read_counter();
}
-static int __init tpm_clocksource_init(unsigned long rate)
-{
- tpm_delay_timer.read_current_timer = &tpm_read_current_timer;
- tpm_delay_timer.freq = rate;
- register_current_timer_delay(&tpm_delay_timer);
-
- sched_clock_register(tpm_read_sched_clock, counter_width, rate);
-
- return clocksource_mmio_init(timer_base + TPM_CNT, "imx-tpm",
- rate, rating, counter_width,
- clocksource_mmio_readl_up);
-}
-
static int tpm_set_next_event(unsigned long delta,
struct clock_event_device *evt)
{
@@ -137,74 +124,77 @@ static irqreturn_t tpm_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct clock_event_device clockevent_tpm = {
- .name = "i.MX7ULP TPM Timer",
- .features = CLOCK_EVT_FEAT_ONESHOT,
- .set_state_oneshot = tpm_set_state_oneshot,
- .set_next_event = tpm_set_next_event,
- .set_state_shutdown = tpm_set_state_shutdown,
+static struct timer_of to_tpm = {
+ .flags = TIMER_OF_IRQ | TIMER_OF_BASE | TIMER_OF_CLOCK,
+ .clkevt = {
+ .name = "i.MX7ULP TPM Timer",
+ .rating = 200,
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .set_state_shutdown = tpm_set_state_shutdown,
+ .set_state_oneshot = tpm_set_state_oneshot,
+ .set_next_event = tpm_set_next_event,
+ .cpumask = cpu_possible_mask,
+ },
+ .of_irq = {
+ .handler = tpm_timer_interrupt,
+ .flags = IRQF_TIMER | IRQF_IRQPOLL,
+ },
};
-static int __init tpm_clockevent_init(unsigned long rate, int irq)
+static int __init tpm_clocksource_init(void)
{
- int ret;
+ tpm_delay_timer.read_current_timer = &tpm_read_current_timer;
+ tpm_delay_timer.freq = timer_of_rate(&to_tpm) >> 3;
+ register_current_timer_delay(&tpm_delay_timer);
- ret = request_irq(irq, tpm_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
- "i.MX7ULP TPM Timer", &clockevent_tpm);
+ sched_clock_register(tpm_read_sched_clock, counter_width,
+ timer_of_rate(&to_tpm) >> 3);
- clockevent_tpm.rating = rating;
- clockevent_tpm.cpumask = cpumask_of(0);
- clockevent_tpm.irq = irq;
- clockevents_config_and_register(&clockevent_tpm, rate, 300,
- GENMASK(counter_width - 1, 1));
+ return clocksource_mmio_init(timer_base + TPM_CNT,
+ "imx-tpm",
+ timer_of_rate(&to_tpm) >> 3,
+ to_tpm.clkevt.rating,
+ counter_width,
+ clocksource_mmio_readl_up);
+}
- return ret;
+static void __init tpm_clockevent_init(void)
+{
+ clockevents_config_and_register(&to_tpm.clkevt,
+ timer_of_rate(&to_tpm) >> 3,
+ 300,
+ GENMASK(counter_width - 1,
+ 1));
}
static int __init tpm_timer_init(struct device_node *np)
{
- struct clk *ipg, *per;
- int irq, ret;
- u32 rate;
-
- timer_base = of_iomap(np, 0);
- if (!timer_base) {
- pr_err("tpm: failed to get base address\n");
- return -ENXIO;
- }
-
- irq = irq_of_parse_and_map(np, 0);
- if (!irq) {
- pr_err("tpm: failed to get irq\n");
- ret = -ENOENT;
- goto err_iomap;
- }
+ struct clk *ipg;
+ int ret;
ipg = of_clk_get_by_name(np, "ipg");
- per = of_clk_get_by_name(np, "per");
- if (IS_ERR(ipg) || IS_ERR(per)) {
- pr_err("tpm: failed to get ipg or per clk\n");
- ret = -ENODEV;
- goto err_clk_get;
+ if (IS_ERR(ipg)) {
+ pr_err("tpm: failed to get ipg clk\n");
+ return -ENODEV;
}
-
/* enable clk before accessing registers */
ret = clk_prepare_enable(ipg);
if (ret) {
pr_err("tpm: ipg clock enable failed (%d)\n", ret);
- goto err_clk_get;
+ clk_put(ipg);
+ return ret;
}
- ret = clk_prepare_enable(per);
- if (ret) {
- pr_err("tpm: per clock enable failed (%d)\n", ret);
- goto err_per_clk_enable;
- }
+ ret = timer_of_init(np, &to_tpm);
+ if (ret)
+ return ret;
+
+ timer_base = timer_of_base(&to_tpm);
- counter_width = (readl(timer_base + TPM_PARAM) & TPM_PARAM_WIDTH_MASK)
- >> TPM_PARAM_WIDTH_SHIFT;
+ counter_width = (readl(timer_base + TPM_PARAM)
+ & TPM_PARAM_WIDTH_MASK) >> TPM_PARAM_WIDTH_SHIFT;
/* use rating 200 for 32-bit counter and 150 for 16-bit counter */
- rating = counter_width == 0x20 ? 200 : 150;
+ to_tpm.clkevt.rating = counter_width == 0x20 ? 200 : 150;
/*
* Initialize tpm module to a known state
@@ -229,29 +219,13 @@ static int __init tpm_timer_init(struct device_node *np)
writel(TPM_SC_CMOD_INC_PER_CNT |
(counter_width == 0x20 ?
TPM_SC_CMOD_DIV_DEFAULT : TPM_SC_CMOD_DIV_MAX),
- timer_base + TPM_SC);
+ timer_base + TPM_SC);
/* set MOD register to maximum for free running mode */
writel(GENMASK(counter_width - 1, 0), timer_base + TPM_MOD);
- rate = clk_get_rate(per) >> 3;
- ret = tpm_clocksource_init(rate);
- if (ret)
- goto err_per_clk_enable;
-
- ret = tpm_clockevent_init(rate, irq);
- if (ret)
- goto err_per_clk_enable;
-
- return 0;
+ tpm_clockevent_init();
-err_per_clk_enable:
- clk_disable_unprepare(ipg);
-err_clk_get:
- clk_put(per);
- clk_put(ipg);
-err_iomap:
- iounmap(timer_base);
- return ret;
+ return tpm_clocksource_init();
}
TIMER_OF_DECLARE(imx7ulp, "fsl,imx7ulp-tpm", tpm_timer_init);
--
2.17.1