Re: [PATCH v2 2/9] dt/bindings: drm/komeda: Add DT bindings for ARM display processor D71

[Rob Herring]

On Wed, Dec 19, 2018 at 6:33 AM james qian wang (Arm Technology China)
<james.qian.wang@xxxxxxx> wrote:
>
> Add DT bindings documentation for the ARM display processor D71 and later
> IPs.
>
> Signed-off-by: James (Qian) Wang <james.qian.wang@xxxxxxx>
> ---
>  .../bindings/display/arm/arm,komeda.txt       | 87 +++++++++++++++++++
>  1 file changed, 87 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/arm/arm,komeda.txt
>
> diff --git a/Documentation/devicetree/bindings/display/arm/arm,komeda.txt b/Documentation/devicetree/bindings/display/arm/arm,komeda.txt
> new file mode 100644
> index 000000000000..d4b53c11b2a2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/arm/arm,komeda.txt
> @@ -0,0 +1,87 @@
> +Device Tree bindings for ARM Komeda display driver
> +
> +Required properties:
> +- compatible: Should be "arm,mali-d71"
> +- reg: Physical base address and length of the registers in the system
> +- interrupts: the interrupt line numbers of the device in the system

How many?

> +- interrupt-names: contains the names of the IRQs in the order they were
> +    provided in the "interrupts" property. Must contain: "DPU".

There's no point in *-names when there is only one entry.

> +- clocks: A list of phandle + clock-specifier pairs, one for each entry
> +    in 'clock-names'
> +- clock-names: A list of clock names. It should contain:
> +      - "pclk": for the APB interface clock
> +      - "mclk": for the main processor clock

The order here doesn't match the example.

> +- #address-cells: Must be 1
> +- #size-cells: Must be 0
> +
> +Required properties for sub-node: pipeline@nq
> +Each device contains one or two pipeline sub-nodes (at least one), each
> +pipeline node should provide properties:
> +- reg: Zero-indexed identifier for the pipeline
> +- clocks: A list of phandle + clock-specifier pairs, one for each entry
> +    in 'clock-names'
> +- clock-names: should contain:
> +      - "aclk": AXI interface clock
> +      - "pxclk": pixel clock

The order here doesn't match the example.

> +
> +- port: each pipeline connect to an encoder input port. The connection is
> +    modelled using the OF graph bindings specified in

modeled

> +    Documentation/devicetree/bindings/graph.txt
> +
> +Optional properties:
> +  - memory-region: phandle to a node describing memory (see
> +    Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
> +    to be used for the framebuffer; if not present, the framebuffer may
> +    be located anywhere in memory.
> +
> +Example:
> +/ {
> +       ...
> +
> +       dp0: display@c00000 {
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +               compatible = "arm,mali-d71";
> +               reg = <0xc00000 0x20000>;
> +               interrupts = <0 168 4>;
> +               interrupt-names = "DPU";
> +               clocks = <&dpu_mclk>, <&dpu_aclk>;
> +               clock-names = "mclk", "pclk";
> +
> +               pl0: pipeline@0 {
> +                       clocks = <&fpgaosc2>, <&dpu_aclk>;
> +                       clock-names = "pxclk", "aclk";
> +                       reg = <0>;

Is there a register range for each pipeline? If so, using that here
would be better than index.

> +
> +                       ports {
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +
> +                               port@0 {
> +                                       reg = <0>;

You can drop 'ports' moving port up a level. And for a single port,
you don't need reg.

> +                                       dp0_pl0_out: endpoint {
> +                                               remote-endpoint = <&db_dvi0_in>;
> +                                       };
> +                               };
> +                       };
> +               };
> +               pl1: pipeline@1 {
> +                       clocks = <&fpgaosc2>, <&dpu_aclk>;
> +                       clock-names = "pxclk", "aclk";
> +                       reg = <1>;
> +
> +                       ports {
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +
> +                               port@0 {
> +                                       reg = <0>;
> +                                       dp0_pl1_out: endpoint {
> +                                               remote-endpoint = <&db_dvi1_in>;
> +                                       };
> +                               };
> +                       };
> +               };
> +       };
> +       ...
> +};
> --
> 2.17.1
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/dri-devel