[RFC PATCH v2 2/3] powerpc/32: Move early_init() in a separate file

[Christophe Leroy]

In preparation of KASAN, move early_init() into a separate
file in order to allow deactivation of KASAN for that function.

Signed-off-by: Christophe Leroy <christophe.leroy@xxxxxx>
---
 arch/powerpc/kernel/Makefile   |  2 +-
 arch/powerpc/kernel/early_32.c | 35 +++++++++++++++++++++++++++++++++++
 arch/powerpc/kernel/setup_32.c | 26 --------------------------
 3 files changed, 36 insertions(+), 27 deletions(-)
 create mode 100644 arch/powerpc/kernel/early_32.c

diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index a5a6a243f3cf..e9a9419b98b6 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -93,7 +93,7 @@ extra-y				+= vmlinux.lds
 
 obj-$(CONFIG_RELOCATABLE)	+= reloc_$(BITS).o
 
-obj-$(CONFIG_PPC32)		+= entry_32.o setup_32.o
+obj-$(CONFIG_PPC32)		+= entry_32.o setup_32.o early_32.o
 obj-$(CONFIG_PPC64)		+= dma-iommu.o iommu.o
 obj-$(CONFIG_KGDB)		+= kgdb.o
 obj-$(CONFIG_BOOTX_TEXT)	+= btext.o
diff --git a/arch/powerpc/kernel/early_32.c b/arch/powerpc/kernel/early_32.c
new file mode 100644
index 000000000000..b3e40d6d651c
--- /dev/null
+++ b/arch/powerpc/kernel/early_32.c
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * Early init before relocation
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/setup.h>
+#include <asm/sections.h>
+
+/*
+ * We're called here very early in the boot.
+ *
+ * Note that the kernel may be running at an address which is different
+ * from the address that it was linked at, so we must use RELOC/PTRRELOC
+ * to access static data (including strings).  -- paulus
+ */
+notrace unsigned long __init early_init(unsigned long dt_ptr)
+{
+	unsigned long offset = reloc_offset();
+
+	/* First zero the BSS */
+	memset(PTRRELOC(&__bss_start), 0, __bss_stop - __bss_start);
+
+	/*
+	 * Identify the CPU type and fix up code sections
+	 * that depend on which cpu we have.
+	 */
+	identify_cpu(offset, mfspr(SPRN_PVR));
+
+	apply_feature_fixups();
+
+	return KERNELBASE + offset;
+}
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 00b8f54fed29..62efe32d890d 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -64,32 +64,6 @@ EXPORT_SYMBOL(DMA_MODE_READ);
 EXPORT_SYMBOL(DMA_MODE_WRITE);
 
 /*
- * We're called here very early in the boot.
- *
- * Note that the kernel may be running at an address which is different
- * from the address that it was linked at, so we must use RELOC/PTRRELOC
- * to access static data (including strings).  -- paulus
- */
-notrace unsigned long __init early_init(unsigned long dt_ptr)
-{
-	unsigned long offset = reloc_offset();
-
-	/* First zero the BSS */
-	memset(PTRRELOC(&__bss_start), 0, __bss_stop - __bss_start);
-
-	/*
-	 * Identify the CPU type and fix up code sections
-	 * that depend on which cpu we have.
-	 */
-	identify_cpu(offset, mfspr(SPRN_PVR));
-
-	apply_feature_fixups();
-
-	return KERNELBASE + offset;
-}
-
-
-/*
  * This is run before start_kernel(), the kernel has been relocated
  * and we are running with enough of the MMU enabled to have our
  * proper kernel virtual addresses
-- 
2.13.3