Re: [PATCH kernel v7 00/20] powerpc/powernv/npu, vfio: NVIDIA V100 + P9 passthrough

[Michael Ellerman]

Alexey Kardashevskiy <aik@xxxxxxxxx> writes:

> My bad, I was not cc-ing everyone but now with v7 I am, sorry about that.

I've already applied v6, I'll assume this is unchanged from that unless
you tell me otherwise.

cheers

> This is for passing through NVIDIA V100 GPUs on POWER9 systems.
> 20/20 has the details of hardware setup.
>
> This implements support for NVIDIA V100 GPU with coherent memory and
> NPU/ATS support available in the POWER9 CPU. The aim is to support
> unmodified vendor driver in the guest.
>
> This is pushed to (both guest and host kernels):
> https://github.com/aik/linux/tree/nv2
>
> Matching qemu is pushed to github:
> https://github.com/aik/qemu/tree/nv2
>
> Skiboot bits are here:
> https://github.com/aik/skiboot/tree/nv2
>
> The individual patches have changelogs. v7 fixes compile warning
> and updates a VFIO capability comment in 20/20.
>
> Please comment. Thanks.
>
>
>
> Alexey Kardashevskiy (20):
>   powerpc/ioda/npu: Call skiboot's hot reset hook when disabling NPU2
>   powerpc/mm/iommu/vfio_spapr_tce: Change mm_iommu_get to reference a
>     region
>   powerpc/vfio/iommu/kvm: Do not pin device memory
>   powerpc/powernv: Move npu struct from pnv_phb to pci_controller
>   powerpc/powernv/npu: Move OPAL calls away from context manipulation
>   powerpc/pseries/iommu: Use memory@ nodes in max RAM address
>     calculation
>   powerpc/pseries/npu: Enable platform support
>   powerpc/pseries: Remove IOMMU API support for non-LPAR systems
>   powerpc/powernv/pseries: Rework device adding to IOMMU groups
>   powerpc/iommu_api: Move IOMMU groups setup to a single place
>   powerpc/powernv: Reference iommu_table while it is linked to a group
>   powerpc/powernv/npu: Move single TVE handling to NPU PE
>   powerpc/powernv/npu: Convert NPU IOMMU helpers to
>     iommu_table_group_ops
>   powerpc/powernv/npu: Add compound IOMMU groups
>   powerpc/powernv/npu: Add release_ownership hook
>   powerpc/powernv/npu: Check mmio_atsd array bounds when populating
>   powerpc/powernv/npu: Fault user page into the hypervisor's pagetable
>   vfio_pci: Allow mapping extra regions
>   vfio_pci: Allow regions to add own capabilities
>   vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver
>
>  drivers/vfio/pci/Makefile                     |   1 +
>  arch/powerpc/include/asm/iommu.h              |  17 +-
>  arch/powerpc/include/asm/mmu_context.h        |  15 +-
>  arch/powerpc/include/asm/pci-bridge.h         |   1 +
>  arch/powerpc/include/asm/pci.h                |   4 +
>  arch/powerpc/platforms/powernv/pci.h          |  30 +-
>  drivers/vfio/pci/trace.h                      | 102 ++++
>  drivers/vfio/pci/vfio_pci_private.h           |  20 +
>  include/uapi/linux/vfio.h                     |  37 ++
>  arch/powerpc/kernel/iommu.c                   |  69 +--
>  arch/powerpc/kvm/book3s_64_vio.c              |  18 +-
>  arch/powerpc/mm/mmu_context_iommu.c           | 110 +++-
>  arch/powerpc/platforms/powernv/npu-dma.c      | 549 +++++++++++++++---
>  arch/powerpc/platforms/powernv/pci-ioda-tce.c |   3 +-
>  arch/powerpc/platforms/powernv/pci-ioda.c     | 237 ++++----
>  arch/powerpc/platforms/powernv/pci.c          |  43 +-
>  arch/powerpc/platforms/pseries/iommu.c        |  88 ++-
>  arch/powerpc/platforms/pseries/pci.c          |  22 +
>  drivers/vfio/pci/vfio_pci.c                   |  42 +-
>  drivers/vfio/pci/vfio_pci_nvlink2.c           | 482 +++++++++++++++
>  drivers/vfio/vfio_iommu_spapr_tce.c           |  64 +-
>  drivers/vfio/pci/Kconfig                      |   6 +
>  22 files changed, 1569 insertions(+), 391 deletions(-)
>  create mode 100644 drivers/vfio/pci/trace.h
>  create mode 100644 drivers/vfio/pci/vfio_pci_nvlink2.c
>
> -- 
> 2.17.1