Re: [PATCH v3 3/3] PCI: imx6: Add support for i.MX8MQ
From: Rob Herring
Date: Thu Dec 20 2018 - 10:00:19 EST
On Wed, Dec 19, 2018 at 7:22 PM Trent Piepho <tpiepho@xxxxxxxxxx> wrote:
>
> On Wed, 2018-12-19 at 16:47 -0800, Andrey Smirnov wrote:
> >
> > > > This series initially added explicit offsets but I suggested a single
> > > > "controller-id" because:
> > > > * There are multiple bit and byte offsets
> > > > * Other imx8 SOCs also have 2x pcie with other bit/byte offsets
> > > >
> > > > Hiding this behind a compatible string and single "controller-id" seem
> > > > preferable to elaborating register maps in dt bindings. It also makes
> > > > upgrades simpler: if features are added which use other bits there is no
> > > > need to describe them in DT and deal with compatibility headaches.
> > >
> > > You already have an id for the controllers: the address. Use that if
> > > you don't want to put the register offsets in DT.
> > >
> >
> > Lucas, are you on board with this?
>
> Does address here mean the address from the controller's reg property?
Yes.
> How do you map that address to the controller's index? A giant table
> of every soc so the soc type plus controller register address pair than
> can be looked up in the driver?
You only need the 2-Nth instance addresses. A non-matching address can
be instance 0.
> I.e., on iMX8MQ the controller at 0x33800000 is controller 0 and so on
> for every possible SoC address combination?
>
> Not really a fan of that.
Well, this was not my first suggestion.
> The situation here is that some registers for these controllers are
> interleaved, right? I.e., there's one register somewhere where bit 0
> means enable controller 0 and bit 1 means enable controller 1 and so
> on.
So? The only difference here is an additional mapping step.
> Isn't cell-index already the standard device tree property for this
> kind of setup?
>
> I know cell-index was historically also (ab)used in an attempt to
> provide a fixed kernel device enumeration order, something now handled
> better by chosen node aliases.
Don't use cell-index. Consider it a deprecated relic from OF that is
not used on FDT (though there probably are some cases it did get
used).
Rob