Re: [PATCH v3 7/7] arm64: dts: qcom: apq8016-sbc: Standardize LED labels

[Manivannan Sadhasivam]

On Mon, Oct 29, 2018 at 03:12:45PM +0530, Manivannan Sadhasivam wrote:
> For all 96Boards, the following standard is used for onboard LEDs.
> 
> green:user1  default-trigger: heartbeat
> green:user2  default-trigger: mmc0/disk-activity(onboard-storage)
> green:user3  default-trigger: mmc1 (SD-card)
> green:user4  default-trigger: none, panic-indicator
> yellow:wlan  default-trigger: phy0tx
> blue:bt      default-trigger: hci0-power
> 
> So lets adopt the same for APQ8016 SBC (Dragonboard410c), which is
> one of the 96Boards CE platform.
>

Hello,

Any update on this patch?

Regards,
Mani

> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> Acked-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> index 46feedf7c989..35f95154316b 100644
> --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> @@ -300,28 +300,28 @@
>  			compatible = "gpio-leds";
>  
>  			led@1 {
> -				label = "apq8016-sbc:green:user1";
> +				label = "green:user1";
>  				gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>;
>  				linux,default-trigger = "heartbeat";
>  				default-state = "off";
>  			};
>  
>  			led@2 {
> -				label = "apq8016-sbc:green:user2";
> +				label = "green:user2";
>  				gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>;
>  				linux,default-trigger = "mmc0";
>  				default-state = "off";
>  			};
>  
>  			led@3 {
> -				label = "apq8016-sbc:green:user3";
> +				label = "green:user3";
>  				gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>;
>  				linux,default-trigger = "mmc1";
>  				default-state = "off";
>  			};
>  
>  			led@4 {
> -				label = "apq8016-sbc:green:user4";
> +				label = "green:user4";
>  				gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>;
>  				linux,default-trigger = "none";
>  				panic-indicator;
> @@ -329,14 +329,14 @@
>  			};
>  
>  			led@5 {
> -				label = "apq8016-sbc:yellow:wlan";
> +				label = "yellow:wlan";
>  				gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>;
>  				linux,default-trigger = "phy0tx";
>  				default-state = "off";
>  			};
>  
>  			led@6 {
> -				label = "apq8016-sbc:blue:bt";
> +				label = "blue:bt";
>  				gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>;
>  				linux,default-trigger = "bluetooth-power";
>  				default-state = "off";
> -- 
> 2.17.1
>