[PATCH v2 1/3] dt-bindings: ASoC: xlnx,audio-formatter: Document audio formatter bindings

[Maruthi Srinivas Bayyavarapu]

Added documentation for audio formatter IP core DT bindings.

Signed-off-by: Maruthi Srinivas Bayyavarapu <maruthi.srinivas.bayyavarapu@xxxxxxxxxx>
---
 .../bindings/sound/xlnx,audio-formatter.txt        | 29 ++++++++++++++++++++++
 1 file changed, 29 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/xlnx,audio-formatter.txt

diff --git a/Documentation/devicetree/bindings/sound/xlnx,audio-formatter.txt b/Documentation/devicetree/bindings/sound/xlnx,audio-formatter.txt
new file mode 100644
index 0000000..cbc93c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/xlnx,audio-formatter.txt
@@ -0,0 +1,29 @@
+Device-Tree bindings for Xilinx PL audio formatter
+
+The IP core supports DMA, data formatting(AES<->PCM conversion)
+of audio samples.
+
+Required properties:
+ - compatible: "xlnx,audio-formatter-1.0"
+ - interrupt-names: Names specified to list of interrupts in same
+		    order mentioned under "interrupts".
+		    List of supported interrupt names are:
+		    "irq_mm2s" : interrupt from MM2S block
+		    "irq_s2mm" : interrupt from S2MM block
+ - interrupts-parent: Phandle for interrupt controller.
+ - interrupts: List of Interrupt numbers.
+ - reg: Base address and size of the IP core instance.
+ - clock-names: List of input clocks.
+   Required elements: "s_axi_lite_aclk", "aud_mclk"
+ - clocks: Input clock specifier. Refer to common clock bindings.
+
+Example:
+	audio_ss_0_audio_formatter_0: audio_formatter@80010000 {
+		compatible = "xlnx,audio-formatter-1.0";
+		interrupt-names = "irq_mm2s", "irq_s2mm";
+		interrupt-parent = <&gic>;
+		interrupts = <0 104 4>, <0 105 4>;
+		reg = <0x0 0x80010000 0x0 0x1000>;
+		clock-names = "s_axi_lite_aclk", "aud_mclk";
+		clocks = <&clk 71>, <&clk_wiz_1 0>;
+	};
-- 
2.7.4