[PATCH v5 3/8] mfd: stmpe: preparations for STMPE ADC driver
From: Philippe Schenker
Date: Fri Dec 21 2018 - 08:47:43 EST
From: Stefan Agner <stefan@xxxxxxxx>
This prepares the MFD for the STMPE ADC driver. This commit introduces
devicetree settings that are used by the ADC and adds an init function.
Common ADC settings that are shared with the touchscreen driver can now
reside in the overlying MFD.
Signed-off-by: Stefan Agner <stefan@xxxxxxxx>
Signed-off-by: Max Krummenacher <max.krummenacher@xxxxxxxxxxx>
Signed-off-by: Philippe Schenker <philippe.schenker@xxxxxxxxxxx>
Acked-for-MFD-by: Lee Jones <lee.jones@xxxxxxxxxx>
---
Changes in v5:
- Added Lee Jone's Ack
- Changed author of commit. Previous patch versions author was wrong
by mistake.
Changes in v4:
- New patch: split mfd changes into this precursor patch
- Export the added stmpe811_adc_commmon_init function
- Disabling adc when mfd is removed
Changes in v3: None
Changes in v2:
- Move code to setup ADC to MFD device, as it is used by both drivers
adc and touchscreen
drivers/mfd/Kconfig | 3 +-
drivers/mfd/stmpe.c | 68 +++++++++++++++++++++++++++++++++++++++
include/linux/mfd/stmpe.h | 10 ++++++
3 files changed, 80 insertions(+), 1 deletion(-)
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 8c5dfdce4326..bba159e8eaa4 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1204,7 +1204,7 @@ config MFD_STMPE
Currently supported devices are:
- STMPE811: GPIO, Touchscreen
+ STMPE811: GPIO, Touchscreen, ADC
STMPE1601: GPIO, Keypad
STMPE1801: GPIO, Keypad
STMPE2401: GPIO, Keypad
@@ -1217,6 +1217,7 @@ config MFD_STMPE
GPIO: stmpe-gpio
Keypad: stmpe-keypad
Touchscreen: stmpe-ts
+ ADC: stmpe-adc
menu "STMicroelectronics STMPE Interface Drivers"
depends on MFD_STMPE
diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
index 566caca4efd8..f582531a8f3e 100644
--- a/drivers/mfd/stmpe.c
+++ b/drivers/mfd/stmpe.c
@@ -463,6 +463,28 @@ static const struct mfd_cell stmpe_ts_cell = {
.num_resources = ARRAY_SIZE(stmpe_ts_resources),
};
+/*
+ * ADC (STMPE811)
+ */
+
+static struct resource stmpe_adc_resources[] = {
+ {
+ .name = "STMPE_TEMP_SENS",
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "STMPE_ADC",
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static const struct mfd_cell stmpe_adc_cell = {
+ .name = "stmpe-adc",
+ .of_compatible = "st,stmpe-adc",
+ .resources = stmpe_adc_resources,
+ .num_resources = ARRAY_SIZE(stmpe_adc_resources),
+};
+
/*
* STMPE811 or STMPE610
*/
@@ -497,6 +519,11 @@ static struct stmpe_variant_block stmpe811_blocks[] = {
.irq = STMPE811_IRQ_TOUCH_DET,
.block = STMPE_BLOCK_TOUCHSCREEN,
},
+ {
+ .cell = &stmpe_adc_cell,
+ .irq = STMPE811_IRQ_TEMP_SENS,
+ .block = STMPE_BLOCK_ADC,
+ },
};
static int stmpe811_enable(struct stmpe *stmpe, unsigned int blocks,
@@ -517,6 +544,35 @@ static int stmpe811_enable(struct stmpe *stmpe, unsigned int blocks,
enable ? 0 : mask);
}
+int stmpe811_adc_common_init(struct stmpe *stmpe)
+{
+ int ret;
+ u8 adc_ctrl1, adc_ctrl1_mask;
+
+ adc_ctrl1 = STMPE_SAMPLE_TIME(stmpe->sample_time) |
+ STMPE_MOD_12B(stmpe->mod_12b) |
+ STMPE_REF_SEL(stmpe->ref_sel);
+ adc_ctrl1_mask = STMPE_SAMPLE_TIME(0xff) | STMPE_MOD_12B(0xff) |
+ STMPE_REF_SEL(0xff);
+
+ ret = stmpe_set_bits(stmpe, STMPE811_REG_ADC_CTRL1,
+ adc_ctrl1_mask, adc_ctrl1);
+ if (ret) {
+ dev_err(stmpe->dev, "Could not setup ADC\n");
+ return ret;
+ }
+
+ ret = stmpe_set_bits(stmpe, STMPE811_REG_ADC_CTRL2,
+ STMPE_ADC_FREQ(0xff), STMPE_ADC_FREQ(stmpe->adc_freq));
+ if (ret) {
+ dev_err(stmpe->dev, "Could not setup ADC\n");
+ return ret;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(stmpe811_adc_common_init);
+
static int stmpe811_get_altfunc(struct stmpe *stmpe, enum stmpe_block block)
{
/* 0 for touchscreen, 1 for GPIO */
@@ -1325,6 +1381,7 @@ int stmpe_probe(struct stmpe_client_info *ci, enum stmpe_partnum partnum)
struct device_node *np = ci->dev->of_node;
struct stmpe *stmpe;
int ret;
+ u32 val;
pdata = devm_kzalloc(ci->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
@@ -1342,6 +1399,15 @@ int stmpe_probe(struct stmpe_client_info *ci, enum stmpe_partnum partnum)
mutex_init(&stmpe->irq_lock);
mutex_init(&stmpe->lock);
+ if (!of_property_read_u32(np, "st,sample-time", &val))
+ stmpe->sample_time = val;
+ if (!of_property_read_u32(np, "st,mod-12b", &val))
+ stmpe->mod_12b = val;
+ if (!of_property_read_u32(np, "st,ref-sel", &val))
+ stmpe->ref_sel = val;
+ if (!of_property_read_u32(np, "st,adc-freq", &val))
+ stmpe->adc_freq = val;
+
stmpe->dev = ci->dev;
stmpe->client = ci->client;
stmpe->pdata = pdata;
@@ -1433,6 +1499,8 @@ int stmpe_remove(struct stmpe *stmpe)
if (!IS_ERR(stmpe->vcc))
regulator_disable(stmpe->vcc);
+ __stmpe_disable(stmpe, STMPE_BLOCK_ADC);
+
mfd_remove_devices(stmpe->dev);
return 0;
diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h
index c0353f6431f9..07f55aac9390 100644
--- a/include/linux/mfd/stmpe.h
+++ b/include/linux/mfd/stmpe.h
@@ -21,6 +21,9 @@
#define STMPE_I_DRIVE(x) (x & 0x1)
#define STMPE_OP_MODE(x) ((x & 0x7) << 1)
+#define STMPE811_REG_ADC_CTRL1 0x20
+#define STMPE811_REG_ADC_CTRL2 0x21
+
struct device;
struct regulator;
@@ -134,6 +137,12 @@ struct stmpe {
u8 ier[2];
u8 oldier[2];
struct stmpe_platform_data *pdata;
+
+ /* For devices that use an ADC */
+ u8 sample_time;
+ u8 mod_12b;
+ u8 ref_sel;
+ u8 adc_freq;
};
extern int stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 data);
@@ -147,6 +156,7 @@ extern int stmpe_set_altfunc(struct stmpe *stmpe, u32 pins,
enum stmpe_block block);
extern int stmpe_enable(struct stmpe *stmpe, unsigned int blocks);
extern int stmpe_disable(struct stmpe *stmpe, unsigned int blocks);
+extern int stmpe811_adc_common_init(struct stmpe *stmpe);
#define STMPE_GPIO_NOREQ_811_TOUCH (0xf0)
--
2.19.2