Re: [PATCH v2 5/5] usb:cdns3 Add Cadence USB3 DRD Driver

[Randy Dunlap]

Hi,

Here are a few Kconfig text corrections.


On 12/23/18 7:13 AM, Pawel Laszczak wrote:
> diff --git a/drivers/usb/cdns3/Kconfig b/drivers/usb/cdns3/Kconfig
> new file mode 100644
> index 000000000000..4adfd87811e8
> --- /dev/null
> +++ b/drivers/usb/cdns3/Kconfig
> @@ -0,0 +1,44 @@
> +config USB_CDNS3
> +	tristate "Cadence USB3 Dual-Role Controller"
> +	depends on USB_SUPPORT && (USB || USB_GADGET) && HAS_DMA
> +	help
> +	  Say Y here if your system has a cadence USB3 dual-role controller.
> +	  It supports: dual-role switch, Host-only, and Peripheral-only.
> +
> +	  If you choose to build this driver is a dynamically linked

	                                     as

> +	  module, the module will be called cdns3.ko.
> +
> +if USB_CDNS3
> +
> +config USB_CDNS3_GADGET
> +        bool "Cadence USB3 device controller"
> +        depends on USB_GADGET
> +        help
> +          Say Y here to enable device controller functionality of the
> +          cadence USBSS-DEV driver.
> +
> +          This controller supports FF, HS and SS mode. It doesn't support
> +          LS and SSP mode

	                mode.

> +
> +config USB_CDNS3_HOST
> +        bool "Cadence USB3 host controller"
> +        depends on USB_XHCI_HCD
> +        help
> +          Say Y here to enable host controller functionality of the
> +          cadence driver.
> +
> +          Host controller is compliance with XHCI so it will use

	                        compliant

> +          standard XHCI driver.
> +
> +config USB_CDNS3_PCI_WRAP
> +	tristate "Cadence USB3 support on PCIe-based platforms"
> +	depends on USB_PCI && ACPI
> +	default USB_CDNS3
> +	help
> +	  If you're using the USBSS Core IP with a PCIe, please say
> +	  'Y' or 'M' here.
> +
> +	  If you choose to build this driver as module it will
> +	  be dynamically linked and module will be called cdns3-pci.ko
> +
> +endif


g'day.
-- 
~Randy