Re: [PATCH net-next 3/3] vhost: access vq metadata through kernel virtual address

From: Michael S. Tsirkin
Date: Mon Dec 24 2018 - 13:10:31 EST


On Mon, Dec 24, 2018 at 03:53:16PM +0800, Jason Wang wrote:
>
> On 2018/12/14 äå8:36, Michael S. Tsirkin wrote:
> > On Fri, Dec 14, 2018 at 11:57:35AM +0800, Jason Wang wrote:
> > > On 2018/12/13 äå11:44, Michael S. Tsirkin wrote:
> > > > On Thu, Dec 13, 2018 at 06:10:22PM +0800, Jason Wang wrote:
> > > > > It was noticed that the copy_user() friends that was used to access
> > > > > virtqueue metdata tends to be very expensive for dataplane
> > > > > implementation like vhost since it involves lots of software check,
> > > > > speculation barrier, hardware feature toggling (e.g SMAP). The
> > > > > extra cost will be more obvious when transferring small packets.
> > > > >
> > > > > This patch tries to eliminate those overhead by pin vq metadata pages
> > > > > and access them through vmap(). During SET_VRING_ADDR, we will setup
> > > > > those mappings and memory accessors are modified to use pointers to
> > > > > access the metadata directly.
> > > > >
> > > > > Note, this was only done when device IOTLB is not enabled. We could
> > > > > use similar method to optimize it in the future.
> > > > >
> > > > > Tests shows about ~24% improvement on TX PPS when using virtio-user +
> > > > > vhost_net + xdp1 on TAP (CONFIG_HARDENED_USERCOPY is not enabled):
> > > > >
> > > > > Before: ~5.0Mpps
> > > > > After: ~6.1Mpps
> > > > >
> > > > > Signed-off-by: Jason Wang<jasowang@xxxxxxxxxx>
> > > > > ---
> > > > > drivers/vhost/vhost.c | 178 ++++++++++++++++++++++++++++++++++++++++++
> > > > > drivers/vhost/vhost.h | 11 +++
> > > > > 2 files changed, 189 insertions(+)
> > > > >
> > > > > diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
> > > > > index bafe39d2e637..1bd24203afb6 100644
> > > > > --- a/drivers/vhost/vhost.c
> > > > > +++ b/drivers/vhost/vhost.c
> > > > > @@ -443,6 +443,9 @@ void vhost_dev_init(struct vhost_dev *dev,
> > > > > vq->indirect = NULL;
> > > > > vq->heads = NULL;
> > > > > vq->dev = dev;
> > > > > + memset(&vq->avail_ring, 0, sizeof(vq->avail_ring));
> > > > > + memset(&vq->used_ring, 0, sizeof(vq->used_ring));
> > > > > + memset(&vq->desc_ring, 0, sizeof(vq->desc_ring));
> > > > > mutex_init(&vq->mutex);
> > > > > vhost_vq_reset(dev, vq);
> > > > > if (vq->handle_kick)
> > > > > @@ -614,6 +617,102 @@ static void vhost_clear_msg(struct vhost_dev *dev)
> > > > > spin_unlock(&dev->iotlb_lock);
> > > > > }
> > > > > +static int vhost_init_vmap(struct vhost_vmap *map, unsigned long uaddr,
> > > > > + size_t size, int write)
> > > > > +{
> > > > > + struct page **pages;
> > > > > + int npages = DIV_ROUND_UP(size, PAGE_SIZE);
> > > > > + int npinned;
> > > > > + void *vaddr;
> > > > > +
> > > > > + pages = kmalloc_array(npages, sizeof(struct page *), GFP_KERNEL);
> > > > > + if (!pages)
> > > > > + return -ENOMEM;
> > > > > +
> > > > > + npinned = get_user_pages_fast(uaddr, npages, write, pages);
> > > > > + if (npinned != npages)
> > > > > + goto err;
> > > > > +
> > > > As I said I have doubts about the whole approach, but this
> > > > implementation in particular isn't a good idea
> > > > as it keeps the page around forever.
>
>
> The pages wil be released during set features.
>
>
> > > > So no THP, no NUMA rebalancing,
>
>
> For THP, we will probably miss 2 or 4 pages, but does this really matter
> consider the gain we have?

We as in vhost? networking isn't the only thing guest does.
We don't even know if this guest does a lot of networking.
You don't
know what else is in this huge page. Can be something very important
that guest touches all the time.

> For NUMA rebalancing, I'm even not quite sure if
> it can helps for the case of IPC (vhost). It looks to me the worst case it
> may cause page to be thrash between nodes if vhost and userspace are running
> in two nodes.


So again it's a gain for vhost but has a completely unpredictable effect on
other functionality of the guest.

That's what bothers me with this approach.




>
> > >
> > > This is the price of all GUP users not only vhost itself.
> > Yes. GUP is just not a great interface for vhost to use.
>
>
> Zerocopy codes (enabled by defualt) use them for years.

But only for TX and temporarily. We pin, read, unpin.

Your patch is different

- it writes into memory and GUP has known issues with file
backed memory
- it keeps pages pinned forever



>
> >
> > > What's more
> > > important, the goal is not to be left too much behind for other backends
> > > like DPDK or AF_XDP (all of which are using GUP).
> >
> > So these guys assume userspace knows what it's doing.
> > We can't assume that.
>
>
> What kind of assumption do you they have?
>
>
> >
> > > > userspace-controlled
> > > > amount of memory locked up and not accounted for.
> > >
> > > It's pretty easy to add this since the slow path was still kept. If we
> > > exceeds the limitation, we can switch back to slow path.
> > >
> > > > Don't get me wrong it's a great patch in an ideal world.
> > > > But then in an ideal world no barriers smap etc are necessary at all.
> > >
> > > Again, this is only for metadata accessing not the data which has been used
> > > for years for real use cases.
> > >
> > > For SMAP, it makes senses for the address that kernel can not forcast. But
> > > it's not the case for the vhost metadata since we know the address will be
> > > accessed very frequently. For speculation barrier, it helps nothing for the
> > > data path of vhost which is a kthread.
> > I don't see how a kthread makes any difference. We do have a validation
> > step which makes some difference.
>
>
> The problem is not kthread but the address of userspace address. The
> addresses of vq metadata tends to be consistent for a while, and vhost knows
> they will be frequently. SMAP doesn't help too much in this case.
>
> Thanks.

It's true for a real life applications but a malicious one
can call the setup ioctls any number of times. And SMAP is
all about malcious applications.

>
> >
> > > Packet or AF_XDP benefit from
> > > accessing metadata directly, we should do it as well.
> > >
> > > Thanks