[PATCH] dsa: return error code upstream

[Kangjie Lu]

Both bcm_sf2_sw_indir_rw and mdiobus_write_nested could fail, so let's
return their error codes upstream.

Signed-off-by: Kangjie Lu <kjlu@xxxxxxx>
---
 drivers/net/dsa/bcm_sf2.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 2eb68769562c..441fea57a7ea 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -303,11 +303,10 @@ static int bcm_sf2_sw_mdio_write(struct mii_bus *bus, int addr, int regnum,
 	 * send them to our master MDIO bus controller
 	 */
 	if (addr == BRCM_PSEUDO_PHY_ADDR && priv->indir_phy_mask & BIT(addr))
-		bcm_sf2_sw_indir_rw(priv, 0, addr, regnum, val);
+		return bcm_sf2_sw_indir_rw(priv, 0, addr, regnum, val);
 	else
-		mdiobus_write_nested(priv->master_mii_bus, addr, regnum, val);
-
-	return 0;
+		return mdiobus_write_nested(priv->master_mii_bus, addr,
+				regnum, val);
 }
 
 static irqreturn_t bcm_sf2_switch_0_isr(int irq, void *dev_id)
-- 
2.17.2 (Apple Git-113)