[PATCH] net: dsa: bcm_sf2: Propagate error value from mdio_write

From: Kangjie Lu
Date: Wed Dec 26 2018 - 13:22:53 EST


Both bcm_sf2_sw_indir_rw and mdiobus_write_nested could fail, so let's
return their error codes upstream.

Signed-off-by: Kangjie Lu <kjlu@xxxxxxx>
---
drivers/net/dsa/bcm_sf2.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 2eb68769562c..236815700fba 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -303,11 +303,10 @@ static int bcm_sf2_sw_mdio_write(struct mii_bus *bus, int addr, int regnum,
* send them to our master MDIO bus controller
*/
if (addr == BRCM_PSEUDO_PHY_ADDR && priv->indir_phy_mask & BIT(addr))
- bcm_sf2_sw_indir_rw(priv, 0, addr, regnum, val);
+ return bcm_sf2_sw_indir_rw(priv, 0, addr, regnum, val);
else
- mdiobus_write_nested(priv->master_mii_bus, addr, regnum, val);
-
- return 0;
+ return mdiobus_write_nested(priv->master_mii_bus,
+ addr, regnum, val);
}

static irqreturn_t bcm_sf2_switch_0_isr(int irq, void *dev_id)
--
2.17.2 (Apple Git-113)