[PATCH v4 00/13] Add support for TISCI irqchip drivers
From: Lokesh Vutla
Date: Thu Dec 27 2018 - 01:09:36 EST
TI AM65x SoC based on K3 architecture, introduced support for Events
which are message based interrupts with minimal latency. These events
are not compatible with regular interrupts and are valid only through
an event transport lane. An Interrupt Aggregator(INTA) is introduced
to convert these events to interrupts. INTA can also group 64 events
into a single interrupt. Now the SoC has many peripherals and a large
number of event sources (time sync or DMA), the use of events is
completely dependent on a user's specific application, which drives a
need for maximum flexibility in which event sources are used in the
system. It is also completely up to software control as to how the
events are serviced.
Because of the huge flexibility there are certain standard peripherals
(like GPIO etc)where all interrupts cannot be directly corrected to host
interrupt controller. For this purpose, Interrupt Router(INTR) is
introduced in the SoC. INTR just does a classic interrupt redirection.
So the SoC has 3 types of interrupt controllers:
- GIC500
- Interrupt Router
- Interrupt Aggregator
Below is a diagrammatic view of how SoC integration of these interrupt
controllers:(https://pastebin.ubuntu.com/p/9ngV3jdGj2/)
Device Index-x Device Index-y
| |
| |
....
\ /
\ /
\ (global events) /
+---------------------------+ +---------+
| | | |
| INTA | | GPIO |
| | | |
+---------------------------+ +---------+
| (vint) |
| |
\|/ |
+---------------------------+ |
| |<-------+
| INTR |
| |
+---------------------------+
|
|
\|/ (gic irq)
+---------------------------+
| |
| GIC |
| |
+---------------------------+
While at it, TISCI abstracts the handling of all above IRQ routes where
interrupt sources are not directly connected to host interrupt controller.
That would be configuration of Interrupt Aggregator and Interrupt Router.
This series adds support for:
- TISCI commands needed for IRQ configuration
- Interrupt Router(INTR) and Interrupt Aggregator(INTA) drivers
Changes since v3:
- Fix documentation for Interrupt Router driver
- Rebased on top of latest next.
- Fully tested with DMA(using out of tree patches)
- Fixed a build error with allmodconfig
Grygorii Strashko (1):
firmware: ti_sci: Add support to get TISCI handle using of_phandle
Lokesh Vutla (11):
firmware: ti_sci: Add support for RM core ops
firmware: ti_sci: Add support for IRQ management
firmware: ti_sci: Add helper apis to manage resources
dt-bindings: irqchip: Introduce TISCI Interrupt router bindings
irqchip: ti-sci-intr: Add support for Interrupt Router driver
genirq/msi: Add support for allocating single MSI for a device
genirq/msi: Add support for .msi_unprepare callback
soc: ti: Add MSI domain support for K3 Interrupt Aggregator
dt-bindings: irqchip: Introduce TISCI Interrupt Aggregator bindings
irqchip: ti-sci-inta: Add support for Interrupt Aggregator driver
soc: ti: am6: Enable interrupt controller drivers
Peter Ujfalusi (1):
firmware: ti_sci: Add RM mapping table for am654
.../bindings/arm/keystone/ti,sci.txt | 3 +-
.../interrupt-controller/ti,sci-inta.txt | 74 ++
.../interrupt-controller/ti,sci-intr.txt | 85 ++
MAINTAINERS | 4 +
drivers/firmware/ti_sci.c | 848 ++++++++++++++++++
drivers/firmware/ti_sci.h | 102 +++
drivers/irqchip/Kconfig | 23 +
drivers/irqchip/Makefile | 2 +
drivers/irqchip/irq-ti-sci-inta.c | 561 ++++++++++++
drivers/irqchip/irq-ti-sci-intr.c | 310 +++++++
drivers/soc/ti/Kconfig | 11 +
drivers/soc/ti/Makefile | 1 +
drivers/soc/ti/k3_inta_msi.c | 193 ++++
include/linux/irqdomain.h | 1 +
include/linux/msi.h | 12 +
include/linux/soc/ti/k3_inta_msi.h | 22 +
include/linux/soc/ti/ti_sci_protocol.h | 169 ++++
kernel/irq/msi.c | 72 +-
18 files changed, 2470 insertions(+), 23 deletions(-)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.txt
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt
create mode 100644 drivers/irqchip/irq-ti-sci-inta.c
create mode 100644 drivers/irqchip/irq-ti-sci-intr.c
create mode 100644 drivers/soc/ti/k3_inta_msi.c
create mode 100644 include/linux/soc/ti/k3_inta_msi.h
--
2.19.2