[PATCH 1/4] dt-bindings: usb: musb: Add support for MediaTek musb controller
From: min.guo
Date: Thu Dec 27 2018 - 02:35:05 EST
From: Min Guo <min.guo@xxxxxxxxxxxx>
This adds support for MediaTek musb controller in
host, peripheral and otg mode
Signed-off-by: Min Guo <min.guo@xxxxxxxxxxxx>
---
.../devicetree/bindings/usb/mediatek,musb.txt | 49 ++++++++++++++++++++++
1 file changed, 49 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/mediatek,musb.txt
diff --git a/Documentation/devicetree/bindings/usb/mediatek,musb.txt b/Documentation/devicetree/bindings/usb/mediatek,musb.txt
new file mode 100644
index 0000000..e899c9b
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/mediatek,musb.txt
@@ -0,0 +1,49 @@
+MediaTek musb DRC/OTG controller
+-------------------------------------------
+
+Required properties:
+ - compatible : should be "mediatek,<soc-model>-musb",
+ "mediatek,mtk-musb", soc-model is the name of SoC, such as
+ mt2701, when using "mediatek,mtk-musb" compatible string, you
+ need SoC specific ones in addition, one of:
+ - "mediatek,mt2701-musb"
+ - reg : specifies physical base address and size of
+ the registers
+ - interrupts : interrupt used by musb controller
+ - interrupt-names : must be "mc"
+ - phys : PHY specifier for the OTG phy
+ - phy-names : should be "usb2-phy"
+ - dr_mode : should be one of "host", "peripheral" or "otg",
+ refer to usb/generic.txt
+ - clocks : a list of phandle + clock-specifier pairs, one for
+ each entry in clock-names
+ - clock-names : must contain "main","mcu","univpll"
+ for clocks of controller
+
+Optional properties:
+ - extcon : external connector for VBUS and IDPIN changes detection,
+ needed when supports dual-role mode.
+ - vbus-supply : reference to the VBUS regulator, needed when supports
+ dual-role mode.
+ - power-domains : a phandle to USB power domain node to control USB's
+ MTCMOS
+
+Example:
+
+usb2: usb@11200000 {
+ compatible = "mediatek,mt2701-musb";
+ "mediatek,mtk-musb";
+ reg = <0 0x11200000 0 0x1000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "mc";
+ phys = <&u2port2 PHY_TYPE_USB2>;
+ phy-names = "usb2-phy";
+ vbus-supply = <&usb_vbus>;
+ extcon = <&extcon_usb>;
+ dr_mode = "otg";
+ clocks = <&pericfg CLK_PERI_USB0>,
+ <&pericfg CLK_PERI_USB0_MCU>,
+ <&pericfg CLK_PERI_USB_SLV>;
+ clock-names = "main","mcu","univpll";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
+};
--
1.9.1