Re: [PATCH v5 6/6] net: lorawan: List LORAWAN in menuconfig

[Alexander Aring]

On Fri, Dec 28, 2018 at 05:57:53AM +0100, Andreas FÃrber wrote:
> Hi Alexander and Xue Liu,
> 
> Am 24.12.18 um 16:32 schrieb Alexander Aring:
> > On Tue, Dec 18, 2018 at 02:50:58PM +0100, Xue Liu wrote:
> >> On Mon, 17 Dec 2018 at 15:19, Andreas FÃrber <afaerber@xxxxxxx> wrote:
> >>> Am 17.12.18 um 09:50 schrieb Xue Liu:
> >>>> I have a question about the architecture of your module. AFAIK LoRaWAN
> >>>> is already the MAC Layer above the LoRa technology. Why do you want to
> >>>> make a new layer called "maclorawan" ?
> >>>
> >>> I had asked Jian-Hong to separate between his soft-MAC implementation
> >>> and the common bits needed to drive hard-MAC implementations found on
> >>> several of the hardware modules made available to me.
> >>>
> >> As a reference Linux 802.11 uses cfg80211 to talk with hard-MAC devices.
> >> We may also use the name âcfgloraâ for hard-MAC implementation.
> > 
> > There exists also a cfg802154. :-)
> > 
> > Note that cfg80211 is also for providing a backwardscompatibility to the
> > wireless ioctl() interface.
> > 
> > In theory it's simple:
> > 
> > netlink API -> SoftMAC (macFOOBAR layer) -> cfgFOOBAR implementation -> driver layer
> >             \-> HardMAC (driver layer) -> cfgFOOBAR implementation
> 
> So how does cfgFOOBAR relate to nlFOOBAR now? Given that we were told to
> use netlink and pointed to some nl802whatever, I am confused about two
> people now calling for cfg. We have an nllora stubbed in linux-lora.git,
> and I was expecting to see an nllorawan either in this series or on

Why there is a different between two lora technologies? This sounds you
driving into two lora subsystems without one userspace api to access them,
this getting worse.

> top. If you're suggesting to rename them technology-neutral, then please

I am sorry, I actually meant that... People tell me that I can't explain
things all the time.

> say so clearly - otherwise it sounds to me like you didn't actually look
> at the staged code yet or didn't read our previous discussions and lead
> our contributors to reinvent things we already have...
> 

As example for 802.15.4:

nl802154 (which is one netlink interface for doesn't matter what
kind 802.15.4 device is behind) -> callback structure of cfg802154 which
goes to a somehow 802.15.4 device as SoftMAC layer or HardMAC driver.

> We really need to complete the layers from the ground up before we get
> lost in more nice-to-have upper layers: For LoRaWAN that means we need
> to have TX and RX working for LoRa _and_ FSK. sx1276 still has lots of
> hardcoded stuff from my own testing that needs to hook into nllora, and
> FSK exists only as ETH_P_FSK constant so far, with no concept for
> switching modes yet (which as mentioned in my presentation needs to go
> via sleep mode, losing most register settings) nor any netlink support.
> Not all drivers need to be at the same implementation level, of course,
> but we need at least one that's far enough to validate such patches.
> 

Your register behaviour sounds for me like a feature for regmap. Or
either a feature to handle in your subsystem.

> And seeing that I just found a major bug in sx1276 driver's TX path,
> apparently no one apart from me is testing that driver - sx128x and
> sx1301 were not yet complete enough to transmit, and due to the open
> socket address/protocol discussions none can receive yet, so as Jiri
> hinted, this LoRaWAN soft-MAC patch series can't have been
> runtime-tested against any staged driver at all!  => [RFC lora-next v5 6/6]
> 

aha. When I started working on ieee802154 many times I thought nobody
had really tested it. That's somehow the process of upstream
programming, it's growing over the time. The first implementation is
always somehow crappy, but people working on it and get experience over
the time, you cannot have perfect code.

> Therefore I thought in our case some hard-MAC may be easier to validate
> LoRaWAN sockets (patch 1/6), to avoid a dependency on completing the MAC
> implementation first. For example, iM880, RF1276TS and 32001353 are pure
> LoRaWAN modules without raw LoRa support. (Whereas many others support
> both and I'm still looking for input on how to best deal with that -
> currently exposing them as LoRa devices for maximal flexibility.)
> 

So that means you ignore SoftMAC because HardMAC is easier? We actually
go the opposite way to say SoftMAC introduce the most infrastructure and
then say that we will bind HardMAC to it.

Of course binding a socket interface to a datapath is easy.

- Alex