[PATCH v2 6/7] Input: tm2-touchkey: Add support for aries touchkey variant
From: PaweÅ Chmiel
Date: Fri Dec 28 2018 - 10:46:48 EST
From: Jonathan Bakker <xc-racer2@xxxxxxx>
The touchkey variant found on aries board is slighty different,
it uses a fixed regulator and writes/read to the same place
Signed-off-by: Jonathan Bakker <xc-racer2@xxxxxxx>
Signed-off-by: PaweÅ Chmiel <pawel.mikolaj.chmiel@xxxxxxxxx>
---
drivers/input/keyboard/tm2-touchkey.c | 53 +++++++++++++++++++++++----
1 file changed, 46 insertions(+), 7 deletions(-)
diff --git a/drivers/input/keyboard/tm2-touchkey.c b/drivers/input/keyboard/tm2-touchkey.c
index c5adb928c6b4..05ad71797e60 100644
--- a/drivers/input/keyboard/tm2-touchkey.c
+++ b/drivers/input/keyboard/tm2-touchkey.c
@@ -28,6 +28,8 @@
#define TM2_TOUCHKEY_DEV_NAME "tm2-touchkey"
+#define ARIES_TOUCHKEY_CMD_LED_ON 0x1
+#define ARIES_TOUCHKEY_CMD_LED_OFF 0x2
#define TM2_TOUCHKEY_CMD_LED_ON 0x10
#define TM2_TOUCHKEY_CMD_LED_OFF 0x20
#define TM2_TOUCHKEY_BIT_PRESS_EV BIT(3)
@@ -38,6 +40,10 @@
struct touchkey_variant {
u8 keycode_reg;
u8 base_reg;
+ u8 cmd_led_on;
+ u8 cmd_led_off;
+ bool no_reg;
+ bool fixed_regulator;
};
struct tm2_touchkey_data {
@@ -54,11 +60,22 @@ struct tm2_touchkey_data {
static const struct touchkey_variant tm2_touchkey_variant = {
.keycode_reg = 0x03,
.base_reg = 0x00,
+ .cmd_led_on = TM2_TOUCHKEY_CMD_LED_ON,
+ .cmd_led_off = TM2_TOUCHKEY_CMD_LED_OFF,
};
static const struct touchkey_variant midas_touchkey_variant = {
.keycode_reg = 0x00,
.base_reg = 0x00,
+ .cmd_led_on = TM2_TOUCHKEY_CMD_LED_ON,
+ .cmd_led_off = TM2_TOUCHKEY_CMD_LED_OFF,
+};
+
+static struct touchkey_variant aries_touchkey_variant = {
+ .no_reg = true,
+ .fixed_regulator = true,
+ .cmd_led_on = ARIES_TOUCHKEY_CMD_LED_ON,
+ .cmd_led_off = ARIES_TOUCHKEY_CMD_LED_OFF,
};
static void tm2_touchkey_led_brightness_set(struct led_classdev *led_dev,
@@ -71,15 +88,20 @@ static void tm2_touchkey_led_brightness_set(struct led_classdev *led_dev,
if (brightness == LED_OFF) {
volt = TM2_TOUCHKEY_LED_VOLTAGE_MIN;
- data = TM2_TOUCHKEY_CMD_LED_OFF;
+ data = touchkey->variant->cmd_led_off;
} else {
volt = TM2_TOUCHKEY_LED_VOLTAGE_MAX;
- data = TM2_TOUCHKEY_CMD_LED_ON;
+ data = touchkey->variant->cmd_led_on;
}
- regulator_set_voltage(touchkey->vdd, volt, volt);
- i2c_smbus_write_byte_data(touchkey->client,
- touchkey->variant->base_reg, data);
+ if (!touchkey->variant->fixed_regulator)
+ regulator_set_voltage(touchkey->vdd, volt, volt);
+
+ if (touchkey->variant->no_reg)
+ i2c_smbus_write_byte(touchkey->client, data);
+ else
+ i2c_smbus_write_byte_data(touchkey->client,
+ touchkey->variant->base_reg, data);
}
static int tm2_touchkey_power_enable(struct tm2_touchkey_data *touchkey)
@@ -112,8 +134,11 @@ static irqreturn_t tm2_touchkey_irq_handler(int irq, void *devid)
int index;
int i;
- data = i2c_smbus_read_byte_data(touchkey->client,
- touchkey->variant->keycode_reg);
+ if (touchkey->variant->no_reg)
+ data = i2c_smbus_read_byte(touchkey->client);
+ else
+ data = i2c_smbus_read_byte_data(touchkey->client,
+ touchkey->variant->keycode_reg);
if (data < 0) {
dev_err(&touchkey->client->dev,
"failed to read i2c data: %d\n", data);
@@ -139,6 +164,14 @@ static irqreturn_t tm2_touchkey_irq_handler(int irq, void *devid)
input_sync(touchkey->input_dev);
out:
+ if (touchkey->variant->fixed_regulator &&
+ data & TM2_TOUCHKEY_BIT_PRESS_EV) {
+ /* touch turns backlight on, so make sure we're in sync */
+ if (touchkey->led_dev.brightness == LED_OFF)
+ tm2_touchkey_led_brightness_set(&touchkey->led_dev,
+ LED_OFF);
+ }
+
return IRQ_HANDLED;
}
@@ -246,6 +279,9 @@ static int tm2_touchkey_probe(struct i2c_client *client,
return error;
}
+ if (touchkey->variant->fixed_regulator)
+ tm2_touchkey_led_brightness_set(&touchkey->led_dev, LED_ON);
+
return 0;
}
@@ -291,6 +327,9 @@ static const struct of_device_id tm2_touchkey_of_match[] = {
}, {
.compatible = "cypress,midas-touchkey",
.data = &midas_touchkey_variant,
+ }, {
+ .compatible = "cypress,aries-touchkey",
+ .data = &aries_touchkey_variant,
},
{ },
};
--
2.17.1