Doing goto just to return is unneccessarily complex, simplify code a
bit.
Drop dev_err()s that can be triggered by user.
Signed-off-by: Pavel Machek <pavel@xxxxxx>
diff --git a/drivers/leds/leds-lm3642.c b/drivers/leds/leds-lm3642.c
index cada084..62fc752 100644
--- a/drivers/leds/leds-lm3642.c
+++ b/drivers/leds/leds-lm3642.c
@@ -110,7 +110,7 @@ static int lm3642_control(struct lm3642_chip_data *chip,
ret = regmap_read(chip->regmap, REG_FLAG, &chip->last_flag);
if (ret < 0) {
dev_err(chip->dev, "Failed to read REG_FLAG Register\n");
- goto out;
+ return ret;
}
if (chip->last_flag)
@@ -150,11 +150,11 @@ static int lm3642_control(struct lm3642_chip_data *chip,
break;
default:
- return ret;
+ return -EINVAL;
}
if (ret < 0) {
dev_err(chip->dev, "Failed to write REG_I_CTRL Register\n");
- goto out;
+ return ret;
}
if (chip->tx_pin)
@@ -163,13 +163,12 @@ static int lm3642_control(struct lm3642_chip_data *chip,
ret = regmap_update_bits(chip->regmap, REG_ENABLE,
MODE_BITS_MASK << MODE_BITS_SHIFT,
opmode << MODE_BITS_SHIFT);
-out:
return ret;
}
/* torch */
-/* torch pin config for lm3642*/
+/* torch pin config for lm3642 */
static ssize_t lm3642_torch_pin_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t size)
@@ -182,7 +181,7 @@ static ssize_t lm3642_torch_pin_store(struct device *dev,
ret = kstrtouint(buf, 10, &state);
if (ret)
- goto out_strtoint;
+ return ret;
if (state != 0)
state = 0x01 << TORCH_PIN_EN_SHIFT;
@@ -190,16 +189,12 @@ static ssize_t lm3642_torch_pin_store(struct device *dev,
ret = regmap_update_bits(chip->regmap, REG_ENABLE,
TORCH_PIN_EN_MASK << TORCH_PIN_EN_SHIFT,
state);
- if (ret < 0)
- goto out;
+ if (ret < 0) {
+ dev_err(chip->dev, "%s:i2c access fail to register\n", __func__);
+ return ret;
+ }
return size;
-out:
- dev_err(chip->dev, "%s:i2c access fail to register\n", __func__);
- return ret;
-out_strtoint:
- dev_err(chip->dev, "%s: fail to change str to int\n", __func__);
- return ret;
}
static DEVICE_ATTR(torch_pin, S_IWUSR, NULL, lm3642_torch_pin_store);
@@ -233,7 +228,7 @@ static ssize_t lm3642_strobe_pin_store(struct device *dev,
ret = kstrtouint(buf, 10, &state);
if (ret)
- goto out_strtoint;
+ return ret;
if (state != 0)
state = 0x01 << STROBE_PIN_EN_SHIFT;
@@ -241,16 +236,12 @@ static ssize_t lm3642_strobe_pin_store(struct device *dev,
ret = regmap_update_bits(chip->regmap, REG_ENABLE,
STROBE_PIN_EN_MASK << STROBE_PIN_EN_SHIFT,
state);
- if (ret < 0)
- goto out;
+ if (ret < 0) {
+ dev_err(chip->dev, "%s:i2c access fail to register\n", __func__);
+ return ret;
+ }
return size;
-out:
- dev_err(chip->dev, "%s:i2c access fail to register\n", __func__);
- return ret;
-out_strtoint:
- dev_err(chip->dev, "%s: fail to change str to int\n", __func__);
- return ret;
}
static DEVICE_ATTR(strobe_pin, S_IWUSR, NULL, lm3642_strobe_pin_store);