Re: [PATCH] arm64: dts: hikey: Give wifi some time after power-on

From: Ulf Hansson
Date: Thu Jan 03 2019 - 16:33:16 EST


On Wed, 2 Jan 2019 at 23:21, John Stultz <john.stultz@xxxxxxxxxx> wrote:
>
> Adding a few folks to cc from the thread here:
> https://patchwork.kernel.org/patch/10734021/
>
> As this sounds like a very similar issue.
> thanks
> -john

John, thanks for looping me in.

>
> On Sun, Dec 30, 2018 at 3:38 AM Jan Kiszka <jan.kiszka@xxxxxx> wrote:
> >
> > From: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
> >
> > Somewhere along recent changes to power control of the wl1835, power-on
> > became very unreliable on the hikey, failing like this:
> >
> > wl1271_sdio: probe of mmc2:0001:1 failed with error -16
> > wl1271_sdio: probe of mmc2:0001:2 failed with error -16
> >
> > After playing with some dt parameters and comparing to other users of
> > this chip, it turned out we need some power-on delay to make things
> > stable again. In contrast to those other users which define 200 ms, the
> > hikey is already very happy with 1 ms.

According to the discussions we had so far, this doesn't sound like
the correct solution.

I am intending to post patch soon, however, I am not sure exactly what
solution to pick yet. I will keep you on cc - and of course I
appreciate if you could help to test.

Kind regards
Uffe

> >
> > Signed-off-by: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
> > ---
> >
> > Tested with 4.19 and linus/master.
> >
> > arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 1 +
> > 1 file changed, 1 insertion(+)
> >
> > diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> > b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> > index f4964bee6a1a..1e771bf201b9 100644
> > --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> > +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> > @@ -118,6 +118,7 @@
> > reset-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
> > clocks = <&pmic>;
> > clock-names = "ext_clock";
> > + post-power-on-delay-ms = <1>;
> > power-off-delay-us = <10>;
> > };
> >
> > --
> > 2.16.4