Re: General protection fault in `switch_mm_irqs_off()`

[Borislav Petkov]

On Fri, Jan 04, 2019 at 01:41:25PM +0100, Paul Menzel wrote:
> Dear Linux folks,
> 
> 
> On 01/03/19 22:45, Paul Menzel wrote:
> 
> > On the server board Asus KGPE-D16 with AMD Opteron 6278 processor updating the microcode update in the firmware from 0x0600062e to 0x0600063e seems to cause a general protection fault with Linux 4.14.87 and 4.20-rc7.
> > 
> >> 46.859: [ÂÂÂ 7.573240] microcode: CPU31: patch_level=0x0600063e
> >> 46.859: [ÂÂÂ 7.578507] microcode: Microcode Update Driver: v2.2.
> >> 46.860: [ÂÂÂ 7.578539] sched_clock: Marking stable (6510054745, 1068444659)->(7999876773, -421377369)
> >> 46.860: [ÂÂÂ 7.593013] registered taskstats version 1
> >> 46.861: [ÂÂÂ 7.598091] rtc_cmos 00:00: setting system clock to 2000-01-01 08:01:51 UTC (946713711)
> >> 46.862: [ÂÂÂ 7.606575] ALSA device list:
> >> 46.862: [ÂÂÂ 7.609802]ÂÂ No soundcards found.
> >> 46.865: [ÂÂÂ 7.615887] Freeing unused kernel image memory: 1564K
> >> 46.871: [ÂÂÂ 7.627073] Write protecting the kernel read-only data: 20480k
> >> 46.872: [ÂÂÂ 7.634366] Freeing unused kernel image memory: 2016K
> >> 46.873: [ÂÂÂ 7.640297] Freeing unused kernel image memory: 584K
> >> 46.874: [ÂÂÂ 7.645521] Run /init as init process
> >> 46.877: [ÂÂÂ 7.652262] general protection fault: 0000 [#1] SMP NOPTI
> >> 46.877: [ÂÂÂ 7.657931] CPU: 18 PID: 0 Comm: swapper/18 Not tainted 4.20.0-rc7.mx64.237 #1
> >> 46.877: [ÂÂÂ 7.665514] Hardware name: ASUS KGPE-D16/KGPE-D16, BIOS 4.9-103-g637bef2037 01/02/2019
> >> 46.878: [ÂÂÂ 7.673804] RIP: 0010:switch_mm_irqs_off+0xb2/0x640
> >> 46.878: [ÂÂÂ 7.678948] Code: 48 c1 ef 09 83 e7 01 48 09 c7 65 48 8b 05 8e 34 fc 7e 48 39 c7 74 15 48 09 f8 a8 01 74 0e b9 49 00 00 00 b8 01 00 00 00 31 d2 <0f> 30 65 48 89 3d 6c 34 fc 7e 8b 05 9a ef a7 01 85 c0 0f 8f 41 04
> >> 46.879: [ÂÂÂ 7.698394] RSP: 0018:ffffc90006343e20 EFLAGS: 00010046
> >> 46.879: [ÂÂÂ 7.703844] RAX: 0000000000000001 RBX: ffff88981ca0b800 RCX: 0000000000000049
> >> 46.879: [ÂÂÂ 7.711238] RDX: 0000000000000000 RSI: ffff88981b87cf80 RDI: ffff88981ca0b800
> >> 46.880: [ÂÂÂ 7.718665] RBP: ffffc90006343e70 R08: 00000001c81bec00 R09: 0000000000000000
> >> 46.880: [ÂÂÂ 7.726092] R10: ffffc90006343e88 R11: 0000000000000000 R12: ffffffff82479b40
> >> 46.880: [ÂÂÂ 7.733494] R13: 0000000000000000 R14: 0000000000000012 R15: ffff88981dd50080
> >> 46.881: [ÂÂÂ 7.740853] FS:Â 0000000000000000(0000) GS:ffff88981fa80000(0000) knlGS:0000000000000000
> >> 46.881: [ÂÂÂ 7.749318] CS:Â 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> >> 46.881: [ÂÂÂ 7.755281] CR2: 0000000000000000 CR3: 000000000240a000 CR4: 00000000000406e0
> >> 46.881: [ÂÂÂ 7.762761] Call Trace:
> >> 46.881: [ÂÂÂ 7.765369]Â ? __schedule+0x1b9/0x7b0
> >> 46.882: [ÂÂÂ 7.769253]Â __schedule+0x1b9/0x7b0
> >> 46.882: [ÂÂÂ 7.772930]Â schedule_idle+0x1e/0x40
> >> 46.882: [ÂÂÂ 7.776744]Â do_idle+0x146/0x200
> >> 46.882: [ÂÂÂ 7.780181]Â cpu_startup_entry+0x19/0x20
> >> 46.883: [ÂÂÂ 7.784274]Â start_secondary+0x183/0x1b0
> >> 46.883: [ÂÂÂ 7.788409]Â secondary_startup_64+0xa4/0xb0
> >> 46.883: [ÂÂÂ 7.792766] Modules linked in:
> >> 46.883: [ÂÂÂ 7.796105] ---[ end trace a423e363fe1ecf67 ]---
> >> 46.884: [ÂÂÂ 7.800939] RIP: 0010:switch_mm_irqs_off+0xb2/0x640
> >> 46.884: [ÂÂÂ 7.806048] Code: 48 c1 ef 09 83 e7 01 48 09 c7 65 48 8b 05 8e 34 fc 7e 48 39 c7 74 15 48 09 f8 a8 01 74 0e b9 49 00 00 00 b8 01 00 00 00 31 d2 <0f> 30 65 48 89 3d 6c 34 fc 7e 8b 05 9a ef a7 01 85 c0 0f 8f 41 04
> >> 46.884: [ÂÂÂ 7.825440] RSP: 0018:ffffc90006343e20 EFLAGS: 00010046
> >> 46.885: [ÂÂÂ 7.830855] RAX: 0000000000000001 RBX: ffff88981ca0b800 RCX: 0000000000000049
> >> 46.885: [ÂÂÂ 7.838230] RDX: 0000000000000000 RSI: ffff88981b87cf80 RDI: ffff88981ca0b800
> >> 46.885: [ÂÂÂ 7.845614] RBP: ffffc90006343e70 R08: 00000001c81bec00 R09: 0000000000000000
> >> 46.886: [ÂÂÂ 7.853047] R10: ffffc90006343e88 R11: 0000000000000000 R12: ffffffff82479b40
> >> 46.886: [ÂÂÂ 7.860427] R13: 0000000000000000 R14: 0000000000000012 R15: ffff88981dd50080
> >> 46.886: [ÂÂÂ 7.867862] FS:Â 0000000000000000(0000) GS:ffff88981fa80000(0000) knlGS:0000000000000000
> >> 46.886: [ÂÂÂ 7.876320] CS:Â 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> >> 46.887: [ÂÂÂ 7.882351] CR2: 0000000000000000 CR3: 000000000240a000 CR4: 00000000000406e0
> >> 46.887: [ÂÂÂ 7.889746] Kernel panic - not syncing: Attempted to kill the idle task!
> >> 46.888: [ÂÂÂ 7.896907] Kernel Offset: disabled
> >> 46.888: [ÂÂÂ 7.900558] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]---
> > 
> > Please find the whole log, including the coreboot messages, attached. The time stamps in the beginning are from the script `readserial.py` from the SeaBIOS repository.
> > 
> > Do you have an idea what is going on, and how to fix it?
> 
> Decoding the code, give the output below.
> 
> ```
> $ scripts/decodecode < /dev/shm/test.log 
> [ 7.806048] Code: 48 c1 ef 09 83 e7 01 48 09 c7 65 48 8b 05 8e 34 fc 7e 48 39 c7 74 15 48 09 f8 a8 01 74 0e b9 49 00 00 00 b8 01 00 00 00 31 d2 <0f> 30 65 48 89 3d 6c 34 fc 7e 8b 05 9a ef a7 01 85 c0 0f 8f 41 04
> All code
> ========
>    0:	48 c1 ef 09          	shr    $0x9,%rdi
>    4:	83 e7 01             	and    $0x1,%edi
>    7:	48 09 c7             	or     %rax,%rdi
>    a:	65 48 8b 05 8e 34 fc 	mov    %gs:0x7efc348e(%rip),%rax        # 0x7efc34a0
>   11:	7e 
>   12:	48 39 c7             	cmp    %rax,%rdi
>   15:	74 15                	je     0x2c
>   17:	48 09 f8             	or     %rdi,%rax
>   1a:	a8 01                	test   $0x1,%al
>   1c:	74 0e                	je     0x2c
>   1e:	b9 49 00 00 00       	mov    $0x49,%ecx
>   23:	b8 01 00 00 00       	mov    $0x1,%eax
>   28:	31 d2                	xor    %edx,%edx
>   2a:*	0f 30                	wrmsr  		<-- trapping instruction
>   2c:	65 48 89 3d 6c 34 fc 	mov    %rdi,%gs:0x7efc346c(%rip)        # 0x7efc34a0
>   33:	7e 
>   34:	8b 05 9a ef a7 01    	mov    0x1a7ef9a(%rip),%eax        # 0x1a7efd4
>   3a:	85 c0                	test   %eax,%eax
>   3c:	0f                   	.byte 0xf
>   3d:	8f 41 04             	popq   0x4(%rcx)
> 
> Code starting with the faulting instruction
> ===========================================
>    0:	0f 30                	wrmsr  
>    2:	65 48 89 3d 6c 34 fc 	mov    %rdi,%gs:0x7efc346c(%rip)        # 0x7efc3476
>    9:	7e 
>    a:	8b 05 9a ef a7 01    	mov    0x1a7ef9a(%rip),%eax        # 0x1a7efaa
>   10:	85 c0                	test   %eax,%eax
>   12:	0f                   	.byte 0xf
>   13:	8f 41 04             	popq   0x4(%rcx)
> ```
> 
> So the problem is with the instruction *wrmsr* [1].
> 
> The content of ECX, which according to [1] is written to, is not
> in the logs though, as far as I can see.

Of course it is:

>   1e:	b9 49 00 00 00       	mov    $0x49,%ecx

which is strange.

Tom, is patch_level=0x0600063e on BD supposed to #GP when writing
MSR_IA32_PRED_CMD...

Thx.

-- 
Regards/Gruss,
    Boris.

ECO tip #101: Trim your mails when you reply.
--