Re: [RFC RESEND PATCH 2/7] dt-bindings: soc: Add opp table on scpsys bindings

[Henry Chen]

On Thu, 2019-01-03 at 12:45 -0600, Rob Herring wrote:
> On Wed, Jan 2, 2019 at 8:10 AM Henry Chen <henryc.chen@xxxxxxxxxxxx> wrote:
> >
> > Add opp table on scpsys dt-bindings for Mediatek SoC.
> >
> > Signed-off-by: Henry Chen <henryc.chen@xxxxxxxxxxxx>
> > ---
> >  Documentation/devicetree/bindings/opp/mtk-opp.txt  | 24 +++++++++++++
> >  .../devicetree/bindings/soc/mediatek/scpsys.txt    | 42 ++++++++++++++++++++++
> >  2 files changed, 66 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/opp/mtk-opp.txt
> >
> > diff --git a/Documentation/devicetree/bindings/opp/mtk-opp.txt b/Documentation/devicetree/bindings/opp/mtk-opp.txt
> > new file mode 100644
> > index 0000000..036be1c
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/opp/mtk-opp.txt
> > @@ -0,0 +1,24 @@
> > +Mediatek OPP bindings to descibe OPP nodes with level values
> > +
> > +OPP tables for devices on Mediatek platforms require an additional
> > +platform specific level value to be specified.
> > +This value is passed on to the mediatek Power Management Unit by the
> > +CPU, which then takes the necessary actions to set a voltage rail
> > +to an appropriate voltage based on the value passed.
> > +
> > +The bindings are based on top of the operating-points-v2 bindings
> > +described in Documentation/devicetree/bindings/opp/opp.txt
> > +Additional properties are described below.
> > +
> > +* OPP Table Node
> > +
> > +Required properties:
> > +- compatible: Allow OPPs to express their compatibility. It should be:
> > +  "operating-points-v2-mtk-level"
> > +
> > +* OPP Node
> > +
> > +Required properties:
> > +- mtk,level: On Mediatek platforms an OPP node can describe a positive value
> > +representing a level that's communicated with a our power management hardware
> > +which then translates it into a certain voltage on a voltage rail.
> 
> Work with the Qcom folks and create a common level property.
> 
> Rob

Ok, I see the reply from Rajendra on
https://lore.kernel.org/patchwork/patch/1027082/
I will follow the new common property, thanks.