[PATCH 4.19 017/170] net: phy: Fix the issue that netif always links up after resuming
From: Greg Kroah-Hartman
Date: Mon Jan 07 2019 - 07:47:27 EST
4.19-stable review patch. If anyone has any objections, please let me know.
From: Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>
[ Upstream commit 8742beb50f2db903d3b6d69ddd81d67ce9914453 ]
Even though the link is down before entering hibernation,
there is an issue that the network interface always links up after resuming
If the link is still down before enabling the network interface,
and after resuming from hibernation, the phydev->state is forcibly set
to PHY_UP in mdio_bus_phy_restore(), and the link becomes up.
In suspend sequence, only if the PHY is attached, mdio_bus_phy_suspend()
calls phy_stop_machine(), and mdio_bus_phy_resume() calls
In resume sequence, it's enough to do the same as mdio_bus_phy_resume()
because the state has been preserved.
This patch fixes the issue by calling phy_start_machine() in
mdio_bus_phy_restore() in the same way as mdio_bus_phy_resume().
Fixes: bc87922ff59d ("phy: Move PHY PM operations into phy_device")
Suggested-by: Heiner Kallweit <hkallweit1@xxxxxxxxx>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
drivers/net/phy/phy_device.c | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
@@ -164,11 +164,8 @@ static int mdio_bus_phy_restore(struct d
if (ret < 0)
- /* The PHY needs to renegotiate. */
- phydev->link = 0;
- phydev->state = PHY_UP;
+ if (phydev->attached_dev && phydev->adjust_link)