Re: [PATCH v1] arm64: dts: qcom: msm8996: Disable USB2 PHY suspend by core

From: Vivek Gautam
Date: Tue Jan 08 2019 - 01:40:34 EST


On Thu, Jan 3, 2019 at 6:18 PM Manu Gautam <mgautam@xxxxxxxxxxxxxx> wrote:
>
> QUSB2 PHY on msm8996 doesn't work well when autosuspend by
> dwc3 core using USB2PHYCFG register is enabled. One of the
> issue seen is that PHY driver reports PLL lock failure and
> fails phy_init() if dwc3 core has USB2 PHY suspend enabled.
> Fix this by using quirks to disable USB2 PHY LPM/suspend and
> dwc3 core already takes care of explicitly suspending PHY
> during suspend if quirks are specified.
>
> Signed-off-by: Manu Gautam <mgautam@xxxxxxxxxxxxxx>
> ---

This works well for db820c [1].
Tested-by: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>

[1] https://github.com/vivekgautam1/linux/commits/origin/v4.20-rc5/db820c

Best regards
Vivek

> arch/arm64/boot/dts/qcom/msm8996.dtsi | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> index b29fe80d7288..1f14ca35afc2 100644
> --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> @@ -911,6 +911,8 @@
> interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>;
> phys = <&hsusb_phy2>;
> phy-names = "usb2-phy";
> + snps,dis_u2_susphy_quirk;
> + snps,dis_enblslpm_quirk;
> };
> };
>
> @@ -940,6 +942,8 @@
> interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
> phys = <&hsusb_phy1>, <&ssusb_phy_0>;
> phy-names = "usb2-phy", "usb3-phy";
> + snps,dis_u2_susphy_quirk;
> + snps,dis_enblslpm_quirk;
> };
> };
>
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>


--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation