Re: [Xen-devel] [PATCH v5 2/2] xen/blkback: rework connect_ring() to avoid inconsistent xenstore 'ring-page-order' set by malicious blkfront

[Dongli Zhang]

oops. Please ignore this v5 patch.

I just realized Linus suggested in an old email not use BUG()/BUG_ON() in the code.

I will switch to the WARN() solution and resend again.

Sorry for the junk email.

Dongli Zhang

On 2019/1/8 äå4:15, Dongli Zhang wrote:
> The xenstore 'ring-page-order' is used globally for each blkback queue and
> therefore should be read from xenstore only once. However, it is obtained
> in read_per_ring_refs() which might be called multiple times during the
> initialization of each blkback queue.
> 
> If the blkfront is malicious and the 'ring-page-order' is set in different
> value by blkfront every time before blkback reads it, this may end up at
> the "WARN_ON(i != (XEN_BLKIF_REQS_PER_PAGE * blkif->nr_ring_pages));" in
> xen_blkif_disconnect() when frontend is destroyed.
> 
> This patch reworks connect_ring() to read xenstore 'ring-page-order' only
> once.
> 
> Signed-off-by: Dongli Zhang <dongli.zhang@xxxxxxxxxx>
> ---
> Changed since v1:
>   * change the order of xenstore read in read_per_ring_refs
>   * use xenbus_read_unsigned() in connect_ring()
> 
> Changed since v2:
>   * simplify the condition check as "(err != 1 && nr_grefs > 1)"
>   * avoid setting err as -EINVAL to remove extra one line of code
> 
> Changed since v3:
>   * exit at the beginning if !nr_grefs
>   * change the if statements to avoid test (err != 1) twice
>   * initialize a 'blkif' stack variable (refer to PATCH 1/2)
> 
> Changed since v4:
>   * use BUG_ON() when (nr_grefs == 0) to reminder the developer
>   * set err = -EINVAL before xenbus_dev_fatal()
> 
>  drivers/block/xen-blkback/xenbus.c | 69 ++++++++++++++++++++++----------------
>  1 file changed, 40 insertions(+), 29 deletions(-)
> 
> diff --git a/drivers/block/xen-blkback/xenbus.c b/drivers/block/xen-blkback/xenbus.c
> index a4aadac..f6146cd 100644
> --- a/drivers/block/xen-blkback/xenbus.c
> +++ b/drivers/block/xen-blkback/xenbus.c
> @@ -926,7 +926,7 @@ static int read_per_ring_refs(struct xen_blkif_ring *ring, const char *dir)
>  	int err, i, j;
>  	struct xen_blkif *blkif = ring->blkif;
>  	struct xenbus_device *dev = blkif->be->dev;
> -	unsigned int ring_page_order, nr_grefs, evtchn;
> +	unsigned int nr_grefs, evtchn;
>  
>  	err = xenbus_scanf(XBT_NIL, dir, "event-channel", "%u",
>  			  &evtchn);
> @@ -936,43 +936,39 @@ static int read_per_ring_refs(struct xen_blkif_ring *ring, const char *dir)
>  		return err;
>  	}
>  
> -	err = xenbus_scanf(XBT_NIL, dev->otherend, "ring-page-order", "%u",
> -			  &ring_page_order);
> -	if (err != 1) {
> -		err = xenbus_scanf(XBT_NIL, dir, "ring-ref", "%u", &ring_ref[0]);
> +	nr_grefs = blkif->nr_ring_pages;
> +
> +	BUG_ON(!nr_grefs);
> +
> +	for (i = 0; i < nr_grefs; i++) {
> +		char ring_ref_name[RINGREF_NAME_LEN];
> +
> +		snprintf(ring_ref_name, RINGREF_NAME_LEN, "ring-ref%u", i);
> +		err = xenbus_scanf(XBT_NIL, dir, ring_ref_name,
> +				   "%u", &ring_ref[i]);
> +
>  		if (err != 1) {
> +			if (nr_grefs == 1)
> +				break;
> +
>  			err = -EINVAL;
> -			xenbus_dev_fatal(dev, err, "reading %s/ring-ref", dir);
> +			xenbus_dev_fatal(dev, err, "reading %s/%s",
> +					 dir, ring_ref_name);
>  			return err;
>  		}
> -		nr_grefs = 1;
> -	} else {
> -		unsigned int i;
> +	}
>  
> -		if (ring_page_order > xen_blkif_max_ring_order) {
> +	if (err != 1) {
> +		WARN_ON(nr_grefs != 1);
> +
> +		err = xenbus_scanf(XBT_NIL, dir, "ring-ref", "%u",
> +				   &ring_ref[0]);
> +		if (err != 1) {
>  			err = -EINVAL;
> -			xenbus_dev_fatal(dev, err, "%s/request %d ring page order exceed max:%d",
> -					 dir, ring_page_order,
> -					 xen_blkif_max_ring_order);
> +			xenbus_dev_fatal(dev, err, "reading %s/ring-ref", dir);
>  			return err;
>  		}
> -
> -		nr_grefs = 1 << ring_page_order;
> -		for (i = 0; i < nr_grefs; i++) {
> -			char ring_ref_name[RINGREF_NAME_LEN];
> -
> -			snprintf(ring_ref_name, RINGREF_NAME_LEN, "ring-ref%u", i);
> -			err = xenbus_scanf(XBT_NIL, dir, ring_ref_name,
> -					   "%u", &ring_ref[i]);
> -			if (err != 1) {
> -				err = -EINVAL;
> -				xenbus_dev_fatal(dev, err, "reading %s/%s",
> -						 dir, ring_ref_name);
> -				return err;
> -			}
> -		}
>  	}
> -	blkif->nr_ring_pages = nr_grefs;
>  
>  	for (i = 0; i < nr_grefs * XEN_BLKIF_REQS_PER_PAGE; i++) {
>  		req = kzalloc(sizeof(*req), GFP_KERNEL);
> @@ -1031,6 +1027,7 @@ static int connect_ring(struct backend_info *be)
>  	size_t xspathsize;
>  	const size_t xenstore_path_ext_size = 11; /* sufficient for "/queue-NNN" */
>  	unsigned int requested_num_queues = 0;
> +	unsigned int ring_page_order;
>  
>  	pr_debug("%s %s\n", __func__, dev->otherend);
>  
> @@ -1076,6 +1073,20 @@ static int connect_ring(struct backend_info *be)
>  		 blkif->nr_rings, blkif->blk_protocol, protocol,
>  		 pers_grants ? "persistent grants" : "");
>  
> +	ring_page_order = xenbus_read_unsigned(dev->otherend,
> +					       "ring-page-order", 0);
> +
> +	if (ring_page_order > xen_blkif_max_ring_order) {
> +		err = -EINVAL;
> +		xenbus_dev_fatal(dev, err,
> +				 "requested ring page order %d exceed max:%d",
> +				 ring_page_order,
> +				 xen_blkif_max_ring_order);
> +		return err;
> +	}
> +
> +	blkif->nr_ring_pages = 1 << ring_page_order;
> +
>  	if (blkif->nr_rings == 1)
>  		return read_per_ring_refs(&blkif->rings[0], dev->otherend);
>  	else {
>