Re: [PATCH] usb: gadget: musb: fix short isoc packets with inventra dma for pandaboard es

[Bin Liu]

On Mon, Jan 07, 2019 at 11:45:24PM -0500, Paul Elder wrote:
> Hi Bin,
> 
> On Mon, Jan 07, 2019 at 01:11:57PM -0600, Bin Liu wrote:
> > Hi Paul,
> > 
> > Sorry for the delay on reviewing it.
> 
> Thanks for the review.
> 
> > For the subject, can you please use
> > 
> > 	usb: musb: gadget: fix short isoc packets with inventra dma
> 
> ack
> 
> > On Tue, Oct 09, 2018 at 02:32:20AM -0400, Paul Elder wrote:
> > > Handling short packets (length < max packet size) in the Inventra DMA
> > > engine in the MUSB driver causes the MUSB DMA controller to hang. An
> > > example of a problem that is caused by this problem is when streaming
> > > video out of a UVC gadget, only the first video frame is transferred.
> > > 
> > > For short packets (mode-0 or mode-1 DMA), MUSB_TXCSR_TXPKTRDY must be
> > > set manually by the driver. This was previously done in musb_g_tx
> > > (musb_gadget.c), but incorrectly (all csr flags were cleared, and only
> > > MUSB_TXCSR_MODE and MUSB_TXCSR_TXPKTRDY). Fixing that problem allows
> > > some requests to be transferred correctly, but multiple requests were
> > > often put together in one USB packet, and caused problems if the packet
> > > size was not a multiple of 4.
> > > 
> > > Instead, MUSB_TXCSR_TXPKTRDY is set in dma_controller_irq (musbhsdma.c),
> > > just like host mode transfers, then musb_g_tx forces the packet to be
> > > flushed, by setting MUSB_TXCSR_FLUSHFIFO.

This should be reworded, since we don't set MUSB_TXCSR_FLUSHFIFO in the
code.

> > > 
> > > This topic was originally tackled by Nicolas Boichat [0] [1] and is discussed
> > 
> > this line is longer than 75 chars.
> 
> ack
> 
> > > further at [2] as part of his GSoC project [3].
> > > 
> > > [0] https://groups.google.com/forum/?hl=en#!topic/beagleboard-gsoc/k8Azwfp75CU
> > > [1] https://gitorious.org/beagleboard-usbsniffer/beagleboard-usbsniffer-kernel/commit/b0be3b6cc195ba732189b04f1d43ec843c3e54c9?p=beagleboard-usbsniffer:beagleboard-usbsniffer-kernel.git;a=patch;h=b0be3b6cc195ba732189b04f1d43ec843c3e54c9
> > > [2] http://beagleboard-usbsniffer.blogspot.com/2010/07/musb-isochronous-transfers-fixed.html
> > > [3] http://elinux.org/BeagleBoard/GSoC/USBSniffer
> > > 
> > > I have forward-ported this patch from 2.6.34 to 4.19-rc1.
> > 
> > this line is irrelevant to the commit message, please move it down to
> > under '---'.
> 
> ack
> 
> > > 
> > > Signed-off-by: Paul Elder <paul.elder@xxxxxxxxxxxxxxxx>
> > > ---
> > >  drivers/usb/musb/musb_gadget.c | 21 ++++++++++++++-------
> > >  drivers/usb/musb/musbhsdma.c   | 21 +++++++++++----------
> > >  2 files changed, 25 insertions(+), 17 deletions(-)
> > > 
> > > diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
> > > index eae8b1b1b45b..d3f33f449445 100644
> > > --- a/drivers/usb/musb/musb_gadget.c
> > > +++ b/drivers/usb/musb/musb_gadget.c
> > > @@ -479,11 +479,16 @@ void musb_g_tx(struct musb *musb, u8 epnum)
> > >  			&& (request->actual == request->length))
> > >  				short_packet = true;
> > >  
> > > -		if ((musb_dma_inventra(musb) || musb_dma_ux500(musb)) &&
> > > -			(is_dma && (!dma->desired_mode ||
> > > -				(request->actual &
> > > -					(musb_ep->packet_sz - 1)))))
> > > -				short_packet = true;
> > > +		if (is_dma && (musb_dma_inventra(musb) || musb_dma_ux500(musb))) {
> > 
> > more than 80 chars.
> >
> > > +			if (!dma->desired_mode ||
> > 
> > I understand you forward-port Nicolas' patch, but do you have a specific
> > readon to re-write this 'if' condition? I'd like to see minimum code
> > change in bug fixes,
> >
> > > +					request->actual % musb_ep->packet_sz) {
> > 
> > but I like this version though, easier to read.
> > 
> > > +				musb_dbg(musb, "%s Flushing (FIFO) EP : KPB\n",
> > 
> > what is 'KPB'? the message could be more meaningful?
> > 
> > > +						musb_ep->end_point.name);
> > > +				musb_writew(epio, MUSB_TXCSR,
> > > +						csr | MUSB_TXCSR_FLUSHFIFO);
> > 
> > What if without this line? The short packet doesn't send out?  setting
> > TXSCR_TXPKTRDY in the dma driver is not sufficient?  TXSCR_FLUSHFIFO is
> > only used for aborting cases.
> 
> I just tested this and you are right, it does work without this line.
> Since this is the only significant line in this very complex if block,
> I'll just remove this entire block too.
> 
> > > +				return;
> > > +			}
> > > +		}
> > >  
> > >  		if (short_packet) {
> > >  			/*
> > > @@ -493,8 +498,10 @@ void musb_g_tx(struct musb *musb, u8 epnum)
> > >  			if (csr & MUSB_TXCSR_TXPKTRDY)
> > >  				return;
> > >  
> > > -			musb_writew(epio, MUSB_TXCSR, MUSB_TXCSR_MODE
> > > -					| MUSB_TXCSR_TXPKTRDY);
> > > +			musb_dbg(musb, "sending zero pkt (zero=%d, length=%d, actual=%d, dma->desired_mode=%d)\n",

actually this is not a 'zero' packet, it is a short packet.

> > > +				 request->zero, request->length, request->actual,
> > 
> > more than 80 chars.
> 
> The format string or the parameters?

Never mind. I meant the parameters, but it is only 1 char longer, just
leave it like this.

> 
> > 
> > > +				 dma->desired_mode);
> > > +			musb_writew(epio, MUSB_TXCSR, csr | MUSB_TXCSR_TXPKTRDY);
> > 
> > more than 80 chars.
> 
> It's only by 1 character. Should I still put the last argument on a new
> line?

same here, never mind my comment.

> 
> > 
> > >  			request->zero = 0;
> > >  		}
> > >  
> > > diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
> > > index a688f7f87829..e514d4700a6b 100644
> > > --- a/drivers/usb/musb/musbhsdma.c
> > > +++ b/drivers/usb/musb/musbhsdma.c
> > > @@ -346,12 +346,10 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data)
> > >  				channel->status = MUSB_DMA_STATUS_FREE;
> > >  
> > >  				/* completed */
> > > -				if ((devctl & MUSB_DEVCTL_HM)
> > > -					&& (musb_channel->transmit)
> > > -					&& ((channel->desired_mode == 0)
> > > -					    || (channel->actual_len &
> > > -					    (musb_channel->max_packet_sz - 1)))
> > > -				    ) {
> > > +				if (musb_channel->transmit &&
> > > +				    (!channel->desired_mode ||
> > > +				     (channel->actual_len %
> > > +				      musb_channel->max_packet_sz))) {
> > 
> > improper indentation.
> 
> ack. You don't think this is more readable than if everything was lined
> up?

The original version has 4-chars indentation, I think it is clearer.

> 
> > >  					u8  epnum  = musb_channel->epnum;
> > >  					int offset = musb->io.ep_offset(epnum,
> > >  								    MUSB_TXCSR);
> > > @@ -363,11 +361,14 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data)
> > >  					 */
> > >  					musb_ep_select(mbase, epnum);
> > >  					txcsr = musb_readw(mbase, offset);
> > > -					txcsr &= ~(MUSB_TXCSR_DMAENAB
> > > +					if (channel->desired_mode == 1) {
> > > +						txcsr &= ~(MUSB_TXCSR_DMAENAB
> > >  							| MUSB_TXCSR_AUTOSET);
> > > -					musb_writew(mbase, offset, txcsr);
> > > -					/* Send out the packet */
> > > -					txcsr &= ~MUSB_TXCSR_DMAMODE;
> > > +						musb_writew(mbase, offset, txcsr);
> > 
> > more than 80 chars.
> 
> This is also only by 2 characters; do you still want just the last
> argument on a new line?

never mind my comment.

Regards,
-Bin.