[RFC 4/4] media: ds90ub954: new driver for TI DS90UB954-Q1 video deserializer
From: Luca Ceresoli
Date: Tue Jan 08 2019 - 18:08:37 EST
LIMITATIONS / TODO:
* Only I2C forwarding is quite complete. Most other features are
only stubbed or not implemented at all. Remote GPIOs have a very
naive implementation, where devicetree contains the values to
write into registers. V4L2 callbacks are almost empty.
* Testing is equally incomplete.
* Only single camera and single flow is currently (partially)
implemented
* Interrupt handler not implemented: interrupts are polled in a
kthread at the moment
* The 'status' sysfs file is not sysfs compliant (contains multiple
values). It was initially used to test the code and it should be
rewritten differently.
* In ds90_rxport_remove_serializer remove only 1 adapter, not all!
(Needs work in i2c-mux)
* The port registers are paged, we need to select the port each time
and to use a lock to keep it selected. Make the driver simpler and
more efficient by using a separate I2C address for each port (see
datasheet, 7.5.1.2 Device Address).
* Some registers are paged, thus regmap usage is probably wrong.
3 solutions:
- use a different I2C address for each rxport (see above)
- use a regmap per port and one for the common registers
- don't use regmap
* Instantiate the remote serializer under the mux adapter? See
comment in ds90_rxport_add_serializer()
Signed-off-by: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
---
drivers/media/Kconfig | 1 +
drivers/media/Makefile | 2 +-
drivers/media/serdes/Kconfig | 13 +
drivers/media/serdes/Makefile | 1 +
drivers/media/serdes/ds90ub954.c | 1335 ++++++++++++++++++++++++++++++
5 files changed, 1351 insertions(+), 1 deletion(-)
create mode 100644 drivers/media/serdes/Kconfig
create mode 100644 drivers/media/serdes/Makefile
create mode 100644 drivers/media/serdes/ds90ub954.c
diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig
index 102eb35fcf3f..9ddb638973d6 100644
--- a/drivers/media/Kconfig
+++ b/drivers/media/Kconfig
@@ -251,5 +251,6 @@ source "drivers/media/i2c/Kconfig"
source "drivers/media/spi/Kconfig"
source "drivers/media/tuners/Kconfig"
source "drivers/media/dvb-frontends/Kconfig"
+source "drivers/media/serdes/Kconfig"
endif # MEDIA_SUPPORT
diff --git a/drivers/media/Makefile b/drivers/media/Makefile
index 985d35ec6b29..09d5c6b5f0a6 100644
--- a/drivers/media/Makefile
+++ b/drivers/media/Makefile
@@ -10,7 +10,7 @@ media-objs := media-device.o media-devnode.o media-entity.o \
# I2C drivers should come before other drivers, otherwise they'll fail
# when compiled as builtin drivers
#
-obj-y += i2c/ tuners/
+obj-y += i2c/ tuners/ serdes/
obj-$(CONFIG_DVB_CORE) += dvb-frontends/
#
diff --git a/drivers/media/serdes/Kconfig b/drivers/media/serdes/Kconfig
new file mode 100644
index 000000000000..6f8d02c187e6
--- /dev/null
+++ b/drivers/media/serdes/Kconfig
@@ -0,0 +1,13 @@
+menu "Video serializers and deserializers"
+
+config SERDES_DS90UB954
+ tristate "TI DS90UB954-Q1 deserializer"
+ help
+ Device driver for the Texas Instruments "DS90UB954-Q1 Dual
+ 4.16 Gbps FPD-Link III Deserializer Hub With MIPI CSI-2
+ Outputs for 2MP/60fps Cameras and RADAR".
+
+ To compile this driver as a module, choose M here: the
+ module will be called ds90ub954.
+
+endmenu
diff --git a/drivers/media/serdes/Makefile b/drivers/media/serdes/Makefile
new file mode 100644
index 000000000000..19589a721cb4
--- /dev/null
+++ b/drivers/media/serdes/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_SERDES_DS90UB954) += ds90ub954.o
diff --git a/drivers/media/serdes/ds90ub954.c b/drivers/media/serdes/ds90ub954.c
new file mode 100644
index 000000000000..53fea6aa8e9a
--- /dev/null
+++ b/drivers/media/serdes/ds90ub954.c
@@ -0,0 +1,1335 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2019 Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/i2c-mux.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/kthread.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <media/v4l2-subdev.h>
+
+#define DS90_NUM_RXPORTS 2 /* Physical RX ports */
+
+#define DS90_NUM_GPIOS 7 /* Physical GPIO pins */
+#define DS90_NUM_BC_GPIOS 4 /* Max GPIOs on Back Channel */
+#define DS90_GPIO_NSOURCES 8 /* Possible GPIO out sources */
+#define DS90_GPIO_NFUNCS 8 /* Possible GPIO out functions */
+
+#define DS90_NUM_SLAVE_ALIASES 8
+#define DS90_MAX_POOL_ALIASES (DS90_NUM_RXPORTS * DS90_NUM_SLAVE_ALIASES)
+
+#define DS90_V4L2_NUM_PADS 2 /* TODO +1 for DS90_NUM_CSITXPORTS */
+
+#define DS90_REG_I2C_DEV_ID 0x00
+#define DS90_REG_RESET 0x01
+#define DS90_REG_GEN_CONFIG 0x02
+#define DS90_REG_REV_MASK 0x03
+#define DS90_REG_DEVICE_STS 0x04
+#define DS90_REG_PAR_ERR_THOLD_HI 0x05
+#define DS90_REG_PAR_ERR_THOLD_LO 0x06
+#define DS90_REG_BCC_WDOG_CTL 0x07
+#define DS90_REG_I2C_CTL1 0x08
+#define DS90_REG_I2C_CTL2 0x09
+#define DS90_REG_SCL_HIGH_TIME 0x0A
+#define DS90_REG_SCL_LOW_TIME 0x0B
+#define DS90_REG_RX_PORT_CTL 0x0C
+#define DS90_REG_IO_CTL 0x0D
+#define DS90_REG_GPIO_PIN_STS 0x0E
+#define DS90_REG_GPIO_INPUT_CTL 0x0F
+#define DS90_REG_GPIO_PIN_CTL(n) (0x10 + (n)) /* n < DS90_NUM_GPIOS */
+#define DS90_REG_FS_CTL 0x18
+#define DS90_REG_FS_HIGH_TIME_1 0x19
+#define DS90_REG_FS_HIGH_TIME_0 0x1A
+#define DS90_REG_FS_LOW_TIME_1 0x1B
+#define DS90_REG_FS_LOW_TIME_0 0x1C
+#define DS90_REG_MAX_FRM_HI 0x1D
+#define DS90_REG_MAX_FRM_LO 0x1E
+#define DS90_REG_CSI_PLL_CTL 0x1F
+#define DS90_REG_FWD_CTL1 0x20
+#define DS90_REG_FWD_CTL2 0x21
+#define DS90_REG_FWD_STS 0x22
+
+#define DS90_REG_INTERRUPT_CTL 0x23
+#define DS90_REG_INTERRUPT_CTL_INT_EN BIT(7)
+#define DS90_REG_INTERRUPT_CTL_IE_CSI_TX0 BIT(4)
+#define DS90_REG_INTERRUPT_CTL_IE_RX(n) BIT((n)) /* rxport[n] IRQ */
+
+#define DS90_REG_INTERRUPT_STS 0x24
+#define DS90_REG_INTERRUPT_STS_INT BIT(7)
+#define DS90_REG_INTERRUPT_STS_IS_CSI_TX0 BIT(4)
+#define DS90_REG_INTERRUPT_STS_IS_RX(n) BIT((n)) /* rxport[n] IRQ */
+
+#define DS90_REG_TS_CONFIG 0x25
+#define DS90_REG_TS_CONTROL 0x26
+#define DS90_REG_TS_LINE_HI 0x27
+#define DS90_REG_TS_LINE_LO 0x28
+#define DS90_REG_TS_STATUS 0x29
+#define DS90_REG_TIMESTAMP_P0_HI 0x2A
+#define DS90_REG_TIMESTAMP_P0_LO 0x2B
+#define DS90_REG_TIMESTAMP_P1_HI 0x2C
+#define DS90_REG_TIMESTAMP_P1_LO 0x2D
+#define DS90_REG_CSI_CTL 0x33
+#define DS90_REG_CSI_CTL2 0x34
+#define DS90_REG_CSI_STS 0x35
+#define DS90_REG_CSI_TX_ICR 0x36
+#define DS90_REG_CSI_TX_ISR 0x37
+#define DS90_REG_CSI_TX_ISR_IS_CSI_SYNC_ERROR BIT(3)
+#define DS90_REG_CSI_TX_ISR_IS_CSI_PASS_ERROR BIT(1)
+
+#define DS90_REG_CSI_TEST_CTL 0x38
+#define DS90_REG_CSI_TEST_PATT_HI 0x39
+#define DS90_REG_CSI_TEST_PATT_LO 0x3A
+#define DS90_REG_AEQ_CTL1 0x42
+#define DS90_REG_AEQ_ERR_THOLD 0x43
+#define DS90_REG_FPD3_CAP 0x4A
+#define DS90_REG_RAW_EMBED_DTYPE 0x4B
+#define DS90_REG_FPD3_PORT_SEL 0x4C
+
+#define DS90_REG_RX_PORT_STS1 0x4D
+#define DS90_REG_RX_PORT_STS1_BCC_CRC_ERROR BIT(5)
+#define DS90_REG_RX_PORT_STS1_LOCK_STS_CHG BIT(4)
+#define DS90_REG_RX_PORT_STS1_BCC_SEQ_ERROR BIT(3)
+#define DS90_REG_RX_PORT_STS1_PARITY_ERROR BIT(2)
+#define DS90_REG_RX_PORT_STS1_PORT_PASS BIT(1)
+#define DS90_REG_RX_PORT_STS1_LOCK_STS BIT(0)
+
+#define DS90_REG_RX_PORT_STS2 0x4E
+#define DS90_REG_RX_PORT_STS2_LINE_LEN_UNSTABLE BIT(7)
+#define DS90_REG_RX_PORT_STS2_LINE_LEN_CHG BIT(6)
+#define DS90_REG_RX_PORT_STS2_FPD3_ENCODE_ERROR BIT(5)
+#define DS90_REG_RX_PORT_STS2_BUFFER_ERROR BIT(4)
+#define DS90_REG_RX_PORT_STS2_CSI_ERROR BIT(3)
+#define DS90_REG_RX_PORT_STS2_FREQ_STABLE BIT(2)
+#define DS90_REG_RX_PORT_STS2_CABLE_FAULT BIT(1)
+#define DS90_REG_RX_PORT_STS2_LINE_CNT_CHG BIT(0)
+
+#define DS90_REG_RX_FREQ_HIGH 0x4F
+#define DS90_REG_RX_FREQ_LOW 0x50
+#define DS90_REG_SENSOR_STS_0 0x51
+#define DS90_REG_SENSOR_STS_1 0x52
+#define DS90_REG_SENSOR_STS_2 0x53
+#define DS90_REG_SENSOR_STS_3 0x54
+#define DS90_REG_RX_PAR_ERR_HI 0x55
+#define DS90_REG_RX_PAR_ERR_LO 0x56
+#define DS90_REG_BIST_ERR_COUNT 0x57
+
+#define DS90_REG_BCC_CONFIG 0x58
+#define DS90_REG_BCC_CONFIG_I2C_PASS_THROUGH BIT(6)
+
+#define DS90_REG_DATAPATH_CTL1 0x59
+#define DS90_REG_DATAPATH_CTL2 0x5A
+#define DS90_REG_SER_ID 0x5B
+#define DS90_REG_SER_ALIAS_ID 0x5C
+
+#define DS90_REG_SLAVE_ID(n) (0x5D + (n)) /* n < DS90_NUM_SLAVE_ALIASES */
+#define DS90_REG_SLAVE_ALIAS(n) (0x65 + (n)) /* n < DS90_NUM_SLAVE_ALIASES */
+
+#define DS90_REG_PORT_CONFIG 0x6D
+#define DS90_REG_BC_GPIO_CTL(n) (0x6E + (n)) /* n < 2 */
+#define DS90_REG_RAW10_ID 0x70
+#define DS90_REG_RAW12_ID 0x71
+#define DS90_REG_CSI_VC_MAP 0x72
+#define DS90_REG_LINE_COUNT_HI 0x73
+#define DS90_REG_LINE_COUNT_LO 0x74
+#define DS90_REG_LINE_LEN_1 0x75
+#define DS90_REG_LINE_LEN_0 0x76
+#define DS90_REG_FREQ_DET_CTL 0x77
+#define DS90_REG_MAILBOX_1 0x78
+#define DS90_REG_MAILBOX_2 0x79
+
+#define DS90_REG_CSI_RX_STS 0x7A
+#define DS90_REG_CSI_RX_STS_LENGTH_ERR BIT(3)
+#define DS90_REG_CSI_RX_STS_CKSUM_ERR BIT(2)
+#define DS90_REG_CSI_RX_STS_ECC2_ERR BIT(1)
+#define DS90_REG_CSI_RX_STS_ECC1_ERR BIT(0)
+
+#define DS90_REG_CSI_ERR_COUNTER 0x7B
+#define DS90_REG_PORT_CONFIG2 0x7C
+#define DS90_REG_PORT_PASS_CTL 0x7D
+#define DS90_REG_SEN_INT_RISE_CTL 0x7E
+#define DS90_REG_SEN_INT_FALL_CTL 0x7F
+#define DS90_REG_REFCLK_FREQ 0xA5
+#define DS90_REG_IND_ACC_CTL 0xB0
+#define DS90_REG_IND_ACC_ADDR 0xB1
+#define DS90_REG_IND_ACC_DATA 0xB2
+#define DS90_REG_BIST_CONTROL 0xB3
+#define DS90_REG_MODE_IDX_STS 0xB8
+#define DS90_REG_LINK_ERROR_COUNT 0xB9
+#define DS90_REG_FPD3_ENC_CTL 0xBA
+#define DS90_REG_FV_MIN_TIME 0xBC
+#define DS90_REG_GPIO_PD_CTL 0xBE
+#define DS90_REG_PORT_DEBUG 0xD0
+#define DS90_REG_AEQ_CTL2 0xD2
+#define DS90_REG_AEQ_STATUS 0xD3
+#define DS90_REG_AEQ_BYPASS 0xD4
+#define DS90_REG_AEQ_MIN_MAX 0xD5
+#define DS90_REG_PORT_ICR_HI 0xD8
+#define DS90_REG_PORT_ICR_LO 0xD9
+#define DS90_REG_PORT_ISR_HI 0xDA
+#define DS90_REG_PORT_ISR_LO 0xDB
+#define DS90_REG_FC_GPIO_STS 0xDC
+#define DS90_REG_FC_GPIO_ICR 0xDD
+#define DS90_REG_SEN_INT_RISE_STS 0xDE
+#define DS90_REG_SEN_INT_FALL_STS 0xDF
+#define DS90_REG_FPD3_RX_ID0 0xF0
+#define DS90_REG_FPD3_RX_ID1 0xF1
+#define DS90_REG_FPD3_RX_ID2 0xF2
+#define DS90_REG_FPD3_RX_ID3 0xF3
+#define DS90_REG_FPD3_RX_ID4 0xF4
+#define DS90_REG_FPD3_RX_ID5 0xF5
+#define DS90_REG_I2C_RX0_ID 0xF8
+#define DS90_REG_I2C_RX1_ID 0xF9
+
+struct ds90_rxport {
+ /* Errors and anomalies counters */
+ u64 bcc_crc_error_count;
+ u64 bcc_seq_error_count;
+ u64 line_len_unstable_count;
+ u64 line_len_chg_count;
+ u64 fpd3_encode_error_count;
+ u64 buffer_error_count;
+ u64 line_cnt_chg_count;
+ u64 csi_rx_sts_length_err_count;
+ u64 csi_rx_sts_cksum_err_count;
+ u64 csi_rx_sts_ecc2_err_count;
+ u64 csi_rx_sts_ecc1_err_count;
+
+ struct i2c_client *ser_client;
+ unsigned short ser_alias; /* ser i2c alias (lower 7 bits) */
+ bool locked;
+
+ struct ds90_data *ds90; /* Owner */
+ unsigned short nport; /* Port number, and index in ds90->rxport[] */
+};
+
+struct ds90_gpio {
+ bool output : 1; /* Direction */
+ unsigned int source : 3;
+ unsigned int func : 3;
+};
+
+struct ds90_data {
+ struct i2c_client *client;
+ struct i2c_mux_core *muxc; /* i2c-mux with ATR */
+ struct regmap *regmap;
+ struct gpio_desc *reset_gpio;
+ struct task_struct *kthread;
+ struct ds90_rxport *rxport[DS90_NUM_RXPORTS];
+ struct ds90_gpio *gpio [DS90_NUM_GPIOS];
+
+ struct v4l2_subdev sd;
+ struct media_pad pads[DS90_V4L2_NUM_PADS];
+ struct v4l2_mbus_framefmt fmt[DS90_V4L2_NUM_PADS];
+
+ struct mutex lock; /* Lock ATR table AND RX port selection */
+
+ /* Address Translator alias-to-slave map table */
+ size_t atr_alias_num; /* Number of aliases configured */
+ u16 atr_alias_id[DS90_MAX_POOL_ALIASES]; /* 0 = no alias */
+ u16 atr_slave_id[DS90_MAX_POOL_ALIASES]; /* 0 = not in use */
+};
+
+#define sd_to_ds90(_sd) container_of(_sd, struct ds90_data, sd)
+
+/* -----------------------------------------------------------------------------
+ * Basic device access
+ */
+
+static bool ds90_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+ return (reg == DS90_REG_INTERRUPT_STS ||
+ reg == DS90_REG_RX_PORT_STS1 ||
+ reg == DS90_REG_RX_PORT_STS2 ||
+ reg == DS90_REG_CSI_RX_STS ||
+ reg == DS90_REG_CSI_TX_ISR);
+}
+
+const struct regmap_config ds90_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .cache_type = REGCACHE_RBTREE,
+ .volatile_reg = ds90_is_volatile_reg,
+};
+
+static int ds90_read(const struct ds90_data *ds90,
+ unsigned int reg,
+ unsigned int *val)
+{
+ int err;
+
+ err = regmap_read(ds90->regmap, reg, val);
+ if (err)
+ dev_err(&ds90->client->dev,
+ "Cannot read register 0x%02x (%d)!\n", reg, err);
+
+ return err;
+}
+
+static int ds90_write(const struct ds90_data *ds90,
+ unsigned int reg,
+ unsigned int val)
+{
+ int err;
+
+ err = regmap_write(ds90->regmap, reg, val);
+ if (err)
+ dev_err(&ds90->client->dev,
+ "Cannot write register 0x%02x (%d)!\n", reg, err);
+
+ return err;
+}
+
+static void ds90_reset(const struct ds90_data *ds90, bool keep_reset)
+{
+ gpiod_set_value_cansleep(ds90->reset_gpio, 0);
+ usleep_range(3000, 6000); /* min 2 ms */
+
+ if (!keep_reset) {
+ gpiod_set_value_cansleep(ds90->reset_gpio, 1);
+ usleep_range(2000, 4000); /* min 1 ms */
+ }
+}
+
+/* Select a port for register reading and writing */
+static int ds90_rxport_select(struct ds90_data *ds90, unsigned nport)
+{
+ int err = ds90_write(ds90, DS90_REG_FPD3_PORT_SEL,
+ (nport << 4) | BIT(nport));
+
+ return err;
+}
+
+/* -----------------------------------------------------------------------------
+ * CSI port
+ */
+
+static void ds90_csi_handle_events(struct ds90_data *ds90)
+{
+ struct device *dev = &ds90->client->dev;
+ unsigned int csi_tx_isr;
+ int err;
+
+ err = ds90_read(ds90, DS90_REG_CSI_TX_ISR, &csi_tx_isr);
+
+ if (!err) {
+ if (csi_tx_isr & DS90_REG_CSI_TX_ISR_IS_CSI_SYNC_ERROR)
+ dev_warn(dev, "CSI_SYNC_ERROR\n");
+
+ if (csi_tx_isr & DS90_REG_CSI_TX_ISR_IS_CSI_PASS_ERROR)
+ dev_warn(dev, "CSI_PASS_ERROR\n");
+ }
+}
+
+/* -----------------------------------------------------------------------------
+ * I2C-MUX with ATR (address translator)
+ */
+
+static int ds90_mux_attach_client(struct i2c_mux_core *muxc,
+ u32 chan_id,
+ const struct i2c_board_info *info,
+ struct i2c_client *client,
+ u16 *alias_id)
+{
+ struct ds90_data **ds90p = i2c_mux_priv(muxc);
+ struct ds90_data *ds90 = *ds90p;
+ struct ds90_rxport *rxport = ds90->rxport[chan_id];
+ struct device *dev = &ds90->client->dev;
+ u16 alias = 0;
+ int reg_idx;
+ int pool_idx;
+ int err = 0;
+
+ mutex_lock(&ds90->lock);
+
+ /* Find unused alias in table */
+
+ for (pool_idx = 0; pool_idx < ds90->atr_alias_num; pool_idx++)
+ if (ds90->atr_slave_id[pool_idx] == 0)
+ break;
+
+ if (pool_idx == ds90->atr_alias_num) {
+ dev_warn(dev, "rx%d: alias pool exhausted\n", rxport->nport);
+ err = -EADDRNOTAVAIL;
+ goto out;
+ }
+
+ alias = ds90->atr_alias_id[pool_idx];
+
+ /* Find first unused alias register */
+
+ ds90_rxport_select(ds90, rxport->nport);
+
+ for (reg_idx = 0; reg_idx < DS90_NUM_SLAVE_ALIASES; reg_idx++) {
+ unsigned int regval;
+
+ err = ds90_read(ds90, DS90_REG_SLAVE_ALIAS(reg_idx), ®val);
+ if (!err && regval == 0)
+ break;
+ }
+
+ if (reg_idx == DS90_NUM_SLAVE_ALIASES) {
+ dev_warn(dev, "rx%d: all aliases in use\n", rxport->nport);
+ err = -EADDRNOTAVAIL;
+ goto out;
+ }
+
+ /* Map alias to slave */
+
+ ds90_write(ds90, DS90_REG_SLAVE_ID(reg_idx), client->addr << 1);
+ ds90_write(ds90, DS90_REG_SLAVE_ALIAS(reg_idx), alias << 1);
+
+ ds90->atr_slave_id[pool_idx] = client->addr;
+
+ *alias_id = alias; /* tell the mux which alias we chose */
+
+ dev_info(dev, "rx%d: map alias 0x%02x to client 0x%02x\n",
+ rxport->nport, alias, client->addr);
+
+out:
+ mutex_unlock(&ds90->lock);
+ return err;
+}
+
+static void ds90_mux_detach_client(struct i2c_mux_core *muxc,
+ u32 chan_id,
+ struct i2c_client *client)
+{
+ struct ds90_data **ds90p = i2c_mux_priv(muxc);
+ struct ds90_data *ds90 = *ds90p;
+ struct ds90_rxport *rxport = ds90->rxport[chan_id];
+ struct device *dev = &ds90->client->dev;
+ u16 alias = 0;
+ int reg_idx;
+ int pool_idx;
+
+ mutex_lock(&ds90->lock);
+
+ /* Find alias mapped to this client */
+
+ for (pool_idx = 0; pool_idx < ds90->atr_alias_num; pool_idx++)
+ if (ds90->atr_slave_id[pool_idx] == client->addr)
+ break;
+
+ if (pool_idx == ds90->atr_alias_num) {
+ dev_err(dev, "rx%d: client 0x%02x is not mapped!\n",
+ rxport->nport, client->addr);
+ goto out;
+ }
+
+ alias = ds90->atr_alias_id[pool_idx];
+
+ /* Find alias register used for this client */
+
+ ds90_rxport_select(ds90, rxport->nport);
+
+ for (reg_idx = 0; reg_idx < DS90_NUM_SLAVE_ALIASES; reg_idx++) {
+ unsigned int regval;
+ int err;
+
+ err = ds90_read(ds90, DS90_REG_SLAVE_ALIAS(reg_idx), ®val);
+ if (!err && regval == (alias << 1))
+ break;
+ }
+
+ if (reg_idx == DS90_NUM_SLAVE_ALIASES) {
+ dev_err(dev, "rx%d: cannot find alias 0x%02x reg (client 0x%02x)!\n",
+ rxport->nport, alias, client->addr);
+ goto out;
+ }
+
+ /* Unmap */
+
+ ds90_write(ds90, DS90_REG_SLAVE_ALIAS(reg_idx), 0);
+ ds90->atr_slave_id[pool_idx] = 0;
+
+ dev_info(dev, "rx%d: unmapped alias 0x%02x from client 0x%02x\n",
+ rxport->nport, alias, client->addr);
+
+out:
+ mutex_unlock(&ds90->lock);
+}
+
+static const struct i2c_mux_attach_operations ds90_mux_attach_ops = {
+ .i2c_mux_attach_client = ds90_mux_attach_client,
+ .i2c_mux_detach_client = ds90_mux_detach_client,
+};
+
+static int ds90_mux_select(struct i2c_mux_core *muxc, u32 chan_id)
+{
+ struct ds90_data **ds90p = i2c_mux_priv(muxc);
+ struct ds90_data *ds90 = *ds90p;
+
+ return ds90_rxport_select(ds90, chan_id);
+}
+
+/* -----------------------------------------------------------------------------
+ * RX ports
+ */
+
+static ssize_t locked_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf);
+static ssize_t status_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf);
+
+static struct device_attribute dev_attr_locked[] = {
+ __ATTR_RO(locked),
+ __ATTR_RO(locked),
+};
+
+static struct device_attribute dev_attr_status[] = {
+ __ATTR_RO(status),
+ __ATTR_RO(status),
+};
+
+static struct attribute *ds90_rxport0_attrs[] = {
+ &dev_attr_locked[0].attr,
+ &dev_attr_status[0].attr,
+ NULL
+};
+
+static struct attribute *ds90_rxport1_attrs[] = {
+ &dev_attr_locked[1].attr,
+ &dev_attr_status[1].attr,
+ NULL
+};
+
+static ssize_t locked_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int nport = (attr - dev_attr_locked);
+ const struct ds90_data *ds90 = dev_get_drvdata(dev);
+ const struct ds90_rxport *rxport = ds90->rxport[nport];
+
+ return scnprintf(buf, PAGE_SIZE, "%d", rxport->locked);
+}
+
+static ssize_t status_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int nport = (attr - dev_attr_status);
+ const struct ds90_data *ds90 = dev_get_drvdata(dev);
+ const struct ds90_rxport *rxport = ds90->rxport[nport];
+
+ return scnprintf(buf, PAGE_SIZE,
+ "bcc_crc_error_count = %llu\n"
+ "bcc_seq_error_count = %llu\n"
+ "line_len_unstable_count = %llu\n"
+ "line_len_chg_count = %llu\n"
+ "fpd3_encode_error_count = %llu\n"
+ "buffer_error_count = %llu\n"
+ "line_cnt_chg_count = %llu\n"
+ "csi_rx_sts_length_err_count = %llu\n"
+ "csi_rx_sts_cksum_err_count = %llu\n"
+ "csi_rx_sts_ecc2_err_count = %llu\n"
+ "csi_rx_sts_ecc1_err_count = %llu\n",
+ rxport->bcc_crc_error_count,
+ rxport->bcc_seq_error_count,
+ rxport->line_len_unstable_count,
+ rxport->line_len_chg_count,
+ rxport->fpd3_encode_error_count,
+ rxport->buffer_error_count,
+ rxport->line_cnt_chg_count,
+ rxport->csi_rx_sts_length_err_count,
+ rxport->csi_rx_sts_cksum_err_count,
+ rxport->csi_rx_sts_ecc2_err_count,
+ rxport->csi_rx_sts_ecc1_err_count);
+}
+
+struct attribute_group ds90_rxport_attr_group[] = {
+ { .name = "rx0", .attrs = ds90_rxport0_attrs },
+ { .name = "rx1", .attrs = ds90_rxport1_attrs },
+};
+
+/*
+ * Instantiate serializer and i2c adapter for the just-locked remote
+ * end.
+ *
+ * @note Must be called with ds90->lock not held! The added i2c
+ * adapter will probe new slaves, which can request i2c transfers,
+ * ending up in calling ds90_mux_attach_client() where the lock is
+ * taken.
+ */
+static int ds90_rxport_add_serializer(struct ds90_data *ds90, int nport)
+{
+ struct ds90_rxport *rxport = ds90->rxport[nport];
+ struct device *dev = &ds90->client->dev;
+ struct i2c_board_info ser_info = { .type = "ds90ub953-q1" };
+ struct i2c_client *client;
+ int err;
+
+ /*
+ * Adding the serializer under the rxport-specific adapter
+ * would be cleaner, but it would need tweaks to bypass the
+ * alias table. Adding to the upstream adapter is way simpler.
+ */
+ ser_info.addr = rxport->ser_alias;
+ client = i2c_new_device(ds90->client->adapter, &ser_info);
+ if (!client) {
+ dev_err(dev, "rx%d: cannot add %s i2c device",
+ nport, ser_info.type);
+ return -EIO;
+ }
+ rxport->ser_client = client;
+
+ err = i2c_mux_add_adapter(ds90->muxc, 0, nport, 0);
+ if (err) {
+ dev_err(dev, "rx%d: cannot add adapter", nport);
+ i2c_unregister_device(rxport->ser_client);
+ rxport->ser_client = NULL;
+ }
+
+ return err;
+}
+
+static void ds90_rxport_remove_serializer(struct ds90_data *ds90, int nport)
+{
+ struct ds90_rxport *rxport = ds90->rxport[nport];
+
+ i2c_mux_del_adapters(ds90->muxc); /* FIXME remove one only */
+
+ if (rxport->ser_client) {
+ i2c_unregister_device(rxport->ser_client);
+ rxport->ser_client = NULL;
+ }
+}
+
+/*
+ * Map a local GPIO output to a back-channel GPIO number.
+ *
+ * Example: GPIO<N> from SoC -> GPIO<X> input at deser -> GPIO<Y> on FPD-3 link.
+ */
+static int ds90_rxport_map_bc_gpios(struct ds90_data *ds90,
+ int nport,
+ const struct device_node *np)
+{
+ struct device *dev = &ds90->client->dev;
+ const __be32 *bc_gpio_map;
+ int bc_gpio_map_len;
+ struct device_node *local_gpio_np;
+ const __be32 *local_gpio_regp;
+ u32 bc_gpio_idx;
+ u32 local_gpio_ph;
+ u32 local_gpio_reg;
+ unsigned int reg;
+ unsigned reg_shift;
+ int err;
+ int i;
+
+ bc_gpio_map = of_get_property(np, "bc-gpio-map", &bc_gpio_map_len);
+ if (!bc_gpio_map) {
+ dev_dbg(dev, "rx%d: bc-gpio-map NOT FOUND \n", nport);
+ return -ENOENT;
+ }
+
+ bc_gpio_map_len /= sizeof(*bc_gpio_map);
+
+ for (i = 0; i + 2 <= bc_gpio_map_len; i += 2) {
+ bc_gpio_idx = be32_to_cpu(bc_gpio_map[i]);
+ local_gpio_ph = be32_to_cpu(bc_gpio_map[i + 1]);
+
+ if (bc_gpio_idx >= DS90_NUM_BC_GPIOS)
+ continue;
+
+ local_gpio_np = of_find_node_by_phandle(local_gpio_ph);
+ if (!local_gpio_np)
+ continue;
+
+ local_gpio_regp = of_get_property(local_gpio_np, "reg", NULL);
+ if (!local_gpio_regp)
+ goto put_and_continue;
+
+ local_gpio_reg = be32_to_cpup(local_gpio_regp);
+ if (local_gpio_reg >= DS90_NUM_GPIOS)
+ goto put_and_continue;
+
+ reg = DS90_REG_BC_GPIO_CTL(bc_gpio_idx / 2);
+ reg_shift = (bc_gpio_idx % 2) * 4;
+
+ dev_dbg(dev, "rx%d: BC GPIO %d from local GPIO %d\n",
+ nport, bc_gpio_idx, local_gpio_reg);
+
+ err = regmap_update_bits(ds90->regmap, reg, 0xf << reg_shift,
+ local_gpio_reg << reg_shift);
+ if (err)
+ dev_err(dev, "rx%d: Cannot update reg 0x%02x (%d)\n",
+ nport, reg, err);
+
+ put_and_continue:
+ of_node_put(local_gpio_np);
+ }
+
+ return 0;
+}
+
+static int ds90_rxport_probe_one(struct ds90_data *ds90,
+ const struct device_node *np)
+{
+ struct device *dev = &ds90->client->dev;
+ struct ds90_rxport *rxport;
+ u32 ser_alias;
+ u32 nport;
+ int err;
+
+ if (of_property_read_u32(np, "reg", &nport) != 0 ||
+ nport >= DS90_NUM_RXPORTS)
+ return -EINVAL;
+
+ if (ds90->rxport[nport]) {
+ dev_err(dev, "OF: %s: reg value %d is duplicated\n",
+ of_node_full_name(np), nport);
+ return -EADDRINUSE;
+ }
+
+ if (of_property_read_u32(np, "ser-i2c-alias", &ser_alias) != 0 ||
+ ser_alias == 0) {
+ dev_err(dev, "OF: %s: invalid ser-i2c-alias\n",
+ of_node_full_name(np));
+ return -EINVAL;
+ }
+
+ rxport = devm_kzalloc(dev, sizeof(*rxport), GFP_KERNEL);
+ if (!rxport)
+ return -ENOMEM;
+
+ rxport->nport = nport;
+ rxport->ser_alias = ser_alias;
+ rxport->ds90 = ds90;
+
+ dev_dbg(dev, "OF: rxport[%d], alias=0x%02x\n", nport, ser_alias);
+
+ ds90->rxport[nport] = rxport; /* Needed by successive calls */
+
+ ds90_rxport_select(ds90, nport);
+
+ ds90_rxport_map_bc_gpios(ds90, nport, np);
+
+ regmap_update_bits(ds90->regmap, DS90_REG_INTERRUPT_CTL,
+ DS90_REG_INTERRUPT_CTL_IE_RX(nport), ~0);
+
+ /* Enable all interrupt sources from this port */
+ ds90_write(ds90, DS90_REG_PORT_ICR_HI, 0x07);
+ ds90_write(ds90, DS90_REG_PORT_ICR_LO, 0x7f);
+
+ regmap_update_bits(ds90->regmap,
+ DS90_REG_BCC_CONFIG,
+ DS90_REG_BCC_CONFIG_I2C_PASS_THROUGH, ~0);
+
+ /* Enable I2C communication to the serializer via the alias addr */
+ ds90_write(ds90, DS90_REG_SER_ALIAS_ID, rxport->ser_alias << 1);
+
+ err = sysfs_create_group(&dev->kobj, &ds90_rxport_attr_group[nport]);
+ if (err) {
+ dev_err(dev, "rx%d: failed creating sysfs group", nport);
+ goto err_sysfs;
+ }
+
+ return 0;
+
+err_sysfs:
+ ds90->rxport[nport] = NULL;
+ return err;
+}
+
+static void ds90_rxport_remove_one(struct ds90_data *ds90, int nport)
+{
+ struct device *dev = &ds90->client->dev;
+
+ ds90_rxport_remove_serializer(ds90, nport);
+ sysfs_remove_group(&dev->kobj, &ds90_rxport_attr_group[nport]);
+}
+
+static int ds90_rxport_probe(struct ds90_data *ds90)
+{
+ struct device_node *ds90_node = ds90->client->dev.of_node;
+ struct i2c_adapter *parent_adap = ds90->client->adapter;
+ struct device *dev = &ds90->client->dev;
+ const struct device_node *rxports_node;
+ struct device_node *rxport_node;
+ int err = 0;
+ int i;
+
+ /*
+ * TODO Maybe could be simplified by allocating the muxc in
+ * ds90_probe() with the ds90 as its "priv" data?
+ * Code: i2c_mux_alloc(parent_adap, DS90_NUM_RXPORTS, sizeof(ds90_data), ...)
+ * ds90_data *ds90 = i2c_mux_priv(muxc)
+ */
+ struct ds90_data **mux_data;
+ ds90->muxc = i2c_mux_alloc(parent_adap, dev, DS90_NUM_RXPORTS,
+ sizeof(*mux_data),
+ I2C_MUX_LOCKED | I2C_MUX_ATR,
+ ds90_mux_select, NULL,
+ &ds90_mux_attach_ops);
+ if (!ds90->muxc)
+ return -ENOMEM;
+ mux_data = i2c_mux_priv(ds90->muxc);
+ *mux_data = ds90;
+
+ rxports_node = of_get_child_by_name(ds90_node, "rxports");
+ if (!rxports_node) {
+ dev_warn(dev, "OF: no rxports defined!\n");
+ } else {
+ for_each_child_of_node(rxports_node, rxport_node) {
+ err = ds90_rxport_probe_one(ds90, rxport_node);
+ if (err)
+ break;
+ }
+ of_node_put(rxport_node);
+ }
+
+ if (err)
+ for (i = 0; i < DS90_NUM_RXPORTS; i++)
+ if (ds90->rxport[i])
+ ds90_rxport_remove_one(ds90, i);
+
+ return err;
+}
+
+static void ds90_rxport_remove(struct ds90_data *ds90)
+{
+ int i;
+
+ i2c_mux_del_adapters(ds90->muxc);
+
+ for (i = 0; i < DS90_NUM_RXPORTS; i++)
+ if (ds90->rxport[i])
+ ds90_rxport_remove_one(ds90, i);
+}
+
+static void ds90_rxport_handle_events(struct ds90_data *ds90, int nport)
+{
+ struct ds90_rxport *rxport = ds90->rxport[nport];
+ struct device *dev = &ds90->client->dev;
+ unsigned int rx_port_sts1;
+ unsigned int rx_port_sts2;
+ unsigned int csi_rx_sts;
+ bool locked;
+ int err;
+
+ mutex_lock(&ds90->lock);
+
+ /* Select port for register reading and writing */
+ err = ds90_rxport_select(ds90, nport);
+
+ /* Read interrupts (also clears most of them) */
+ if (!err)
+ err = ds90_read(ds90, DS90_REG_RX_PORT_STS1, &rx_port_sts1);
+ if (!err)
+ err = ds90_read(ds90, DS90_REG_RX_PORT_STS2, &rx_port_sts2);
+ if (!err)
+ err = ds90_read(ds90, DS90_REG_CSI_RX_STS, &csi_rx_sts);
+
+ mutex_unlock(&ds90->lock);
+
+ if (err)
+ return;
+
+ if (rx_port_sts1 & DS90_REG_RX_PORT_STS1_BCC_CRC_ERROR)
+ rxport->bcc_crc_error_count++;
+
+ if (rx_port_sts1 & DS90_REG_RX_PORT_STS1_BCC_SEQ_ERROR)
+ rxport->bcc_seq_error_count++;
+
+ if (rx_port_sts2 & DS90_REG_RX_PORT_STS2_LINE_LEN_UNSTABLE)
+ rxport->line_len_unstable_count++;
+
+ if (rx_port_sts2 & DS90_REG_RX_PORT_STS2_LINE_LEN_CHG)
+ rxport->line_len_chg_count++;
+
+ if (rx_port_sts2 & DS90_REG_RX_PORT_STS2_FPD3_ENCODE_ERROR)
+ rxport->fpd3_encode_error_count++;
+
+ if (rx_port_sts2 & DS90_REG_RX_PORT_STS2_BUFFER_ERROR)
+ rxport->buffer_error_count++;
+
+ if (rx_port_sts2 & DS90_REG_RX_PORT_STS2_LINE_CNT_CHG)
+ rxport->line_cnt_chg_count++;
+
+ if (csi_rx_sts & DS90_REG_CSI_RX_STS_LENGTH_ERR)
+ rxport->csi_rx_sts_length_err_count++;
+
+ if (csi_rx_sts & DS90_REG_CSI_RX_STS_CKSUM_ERR)
+ rxport->csi_rx_sts_cksum_err_count++;
+
+ if (csi_rx_sts & DS90_REG_CSI_RX_STS_ECC2_ERR)
+ rxport->csi_rx_sts_ecc2_err_count++;
+
+ if (csi_rx_sts & DS90_REG_CSI_RX_STS_ECC1_ERR)
+ rxport->csi_rx_sts_ecc1_err_count++;
+
+ /* Update locked status */
+ locked = rx_port_sts1 & DS90_REG_RX_PORT_STS1_LOCK_STS;
+ if (locked && !rxport->locked) {
+ dev_info(dev, "rx%d LOCKED\n", nport);
+ /* See note about locking in ds90_rxport_add_serializer()! */
+ ds90_rxport_add_serializer(ds90, nport);
+ }
+ else if (!locked && rxport->locked) {
+ dev_info(dev, "rx%d NOT LOCKED\n", nport);
+ ds90_rxport_remove_serializer(ds90, nport);
+ }
+ rxport->locked = locked;
+}
+
+/* -----------------------------------------------------------------------------
+ * GPIOs
+ */
+
+/* TODO struct ds90_gpio is not used outside of this function. Remove it??? */
+static int ds90_gpio_probe_one(struct ds90_data *ds90, struct device_node *np)
+{
+ struct device *dev = &ds90->client->dev;
+ struct ds90_gpio *gpio;
+ u32 reg;
+ u32 source;
+ u32 func;
+
+ if (of_property_read_u32(np, "reg", ®) != 0 ||
+ reg >= DS90_NUM_GPIOS) {
+ dev_err(dev, "OF: %s: invalid reg\n", of_node_full_name(np));
+ return -EINVAL;
+ }
+
+ if (ds90->gpio[reg]) {
+ dev_err(dev, "OF: %s: reg value %d is duplicated\n",
+ of_node_full_name(np), reg);
+ return -EADDRINUSE;
+ }
+
+ gpio = devm_kzalloc(dev, sizeof(*gpio), GFP_KERNEL);
+ if (!gpio)
+ return -ENOMEM;
+
+ gpio->output = false; /* A safe default */
+
+ if (of_property_read_bool(np, "output")) {
+ if (of_property_read_u32(np, "source", &source) == 0 &&
+ of_property_read_u32(np, "function", &func) == 0 &&
+ source < DS90_GPIO_NSOURCES &&
+ func < DS90_GPIO_NFUNCS) {
+ gpio->output = true;
+ gpio->source = source;
+ gpio->func = func;
+ } else {
+ dev_err(dev,
+ "OF: %s: incorrect output parameters, fallback to input!\n",
+ of_node_full_name(np));
+ }
+ } else if (!of_property_read_bool(np, "input")) {
+ dev_err(dev,
+ "OF: %s: no direction specified, fallback to input!\n",
+ of_node_full_name(np));
+ }
+
+ if (gpio->output)
+ dev_dbg(dev, "OF: gpio[%d], output, source %d, function %d\n",
+ reg, gpio->source, gpio->func);
+ else
+ dev_dbg(dev, "OF: gpio[%d], input\n", reg);
+
+ ds90->gpio[reg] = gpio;
+
+ if (gpio->output) {
+ u8 pin_ctl = gpio->source << 5 | gpio->func << 2 | 1;
+
+ regmap_update_bits(ds90->regmap, DS90_REG_GPIO_INPUT_CTL,
+ BIT(reg), 0);
+ ds90_write(ds90, DS90_REG_GPIO_PIN_CTL(reg), pin_ctl);
+ } else {
+ regmap_update_bits(ds90->regmap, DS90_REG_GPIO_INPUT_CTL,
+ BIT(reg), ~0);
+ }
+
+ return 0;
+}
+
+static int ds90_gpio_probe(struct ds90_data *ds90)
+{
+ struct device_node *ds90_node = ds90->client->dev.of_node;
+ struct device *dev = &ds90->client->dev;
+ const struct device_node *gpios_node;
+ struct device_node *gpio_node;
+ int err = 0;
+
+ gpios_node = of_get_child_by_name(ds90_node, "gpios");
+ if (!gpios_node) {
+ dev_warn(dev, "OF: no gpios defined!\n");
+ } else {
+ for_each_child_of_node(gpios_node, gpio_node) {
+ err = ds90_gpio_probe_one(ds90, gpio_node);
+ if (err)
+ break;
+ }
+ of_node_put(gpio_node);
+ }
+
+ return err;
+}
+
+/* -----------------------------------------------------------------------------
+ * V4L2
+ */
+
+static int ds90_s_stream(struct v4l2_subdev *sd, int enable)
+{
+ struct ds90_data *ds90 = sd_to_ds90(sd);
+ struct device *dev = &ds90->client->dev;
+
+ dev_info(dev, "%s: TODO\n", __func__);
+
+ return 0;
+}
+
+static int ds90_enum_mbus_code(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_mbus_code_enum *code)
+{
+ struct ds90_data *ds90 = sd_to_ds90(sd);
+ struct device *dev = &ds90->client->dev;
+
+ dev_info(dev, "%s: TODO\n", __func__);
+
+ return 0;
+}
+
+static struct v4l2_mbus_framefmt *
+ds90_get_pad_format(struct ds90_data *ds90,
+ struct v4l2_subdev_pad_config *cfg,
+ unsigned int pad, u32 which)
+{
+ switch (which) {
+ case V4L2_SUBDEV_FORMAT_TRY:
+ return v4l2_subdev_get_try_format(&ds90->sd, cfg, pad);
+ case V4L2_SUBDEV_FORMAT_ACTIVE:
+ return &ds90->fmt[pad];
+ default:
+ return NULL;
+ }
+}
+
+static int ds90_set_fmt(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *format)
+{
+ struct ds90_data *ds90 = sd_to_ds90(sd);
+ struct device *dev = &ds90->client->dev;
+
+ dev_info(dev, "%s: TODO\n", __func__);
+
+ return 0;
+}
+
+static int ds90_get_fmt(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *format)
+{
+ struct ds90_data *ds90 = sd_to_ds90(sd);
+ struct v4l2_mbus_framefmt *cfg_fmt;
+ struct device *dev = &ds90->client->dev;
+
+ dev_dbg(dev, "pad %d which %d", format->pad, format->which);
+
+ if (format->pad >= DS90_V4L2_NUM_PADS)
+ return -EINVAL;
+
+ cfg_fmt = ds90_get_pad_format(ds90, cfg, format->pad, format->which);
+ if (!cfg_fmt)
+ return -EINVAL;
+
+ format->format = *cfg_fmt;
+
+ return 0;
+}
+
+static int ds90_get_frame_desc(struct v4l2_subdev *sd,
+ unsigned int pad,
+ struct v4l2_mbus_frame_desc *fd)
+{
+ struct ds90_data *ds90 = sd_to_ds90(sd);
+ struct device *dev = &ds90->client->dev;
+
+ dev_info(dev, "%s: TODO\n", __func__);
+
+ return 0;
+}
+
+static const struct v4l2_subdev_video_ops ds90_video_ops = {
+ .s_stream = ds90_s_stream,
+};
+
+static const struct v4l2_subdev_pad_ops ds90_pad_ops = {
+ .enum_mbus_code = ds90_enum_mbus_code,
+ .get_fmt = ds90_get_fmt,
+ .set_fmt = ds90_set_fmt,
+ .get_frame_desc = ds90_get_frame_desc,
+};
+
+static const struct v4l2_subdev_ops ds90_subdev_ops = {
+ .video = &ds90_video_ops,
+ .pad = &ds90_pad_ops,
+};
+
+static void ds90_init_format(struct v4l2_mbus_framefmt *fmt)
+{
+ fmt->width = 1920;
+ fmt->height = 1080;
+ fmt->code = MEDIA_BUS_FMT_SRGGB8_1X8;
+ fmt->colorspace = V4L2_COLORSPACE_SRGB;
+ fmt->field = V4L2_FIELD_NONE;
+}
+
+static int ds90_open(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh)
+{
+ struct v4l2_mbus_framefmt *format;
+ unsigned int i;
+
+ for (i = 0; i < DS90_V4L2_NUM_PADS; i++) {
+ format = v4l2_subdev_get_try_format(subdev, fh->pad, i);
+ ds90_init_format(format);
+ }
+
+ return 0;
+}
+
+static const struct v4l2_subdev_internal_ops ds90_subdev_internal_ops = {
+ .open = ds90_open,
+};
+
+/* -----------------------------------------------------------------------------
+ * Core
+ */
+
+static int ds90_run(void *arg)
+{
+ struct ds90_data *ds90 = arg;
+ unsigned int int_sts;
+ int err;
+ int i;
+
+ while (1) {
+ if (kthread_should_stop())
+ break;
+
+ err = ds90_read(ds90, DS90_REG_INTERRUPT_STS, &int_sts);
+
+ if (!err && int_sts) {
+ if (int_sts & DS90_REG_INTERRUPT_STS_IS_CSI_TX0)
+ ds90_csi_handle_events(ds90);
+
+ for (i = 0; i < DS90_NUM_RXPORTS; i++)
+ if (int_sts & DS90_REG_INTERRUPT_STS_IS_RX(i) &&
+ ds90->rxport[i])
+ ds90_rxport_handle_events(ds90, i);
+ }
+
+ msleep(1000);
+ }
+
+ return 0;
+}
+
+static int ds90_parse_dt(struct ds90_data *ds90)
+{
+ struct device_node *np = ds90->client->dev.of_node;
+ struct device *dev = &ds90->client->dev;
+ int n;
+
+ if (!np) {
+ dev_err(dev, "OF: no device tree node!\n");
+ return -ENOENT;
+ }
+
+ n = of_property_read_variable_u16_array(np, "i2c-alias-pool",
+ ds90->atr_alias_id,
+ 2, DS90_MAX_POOL_ALIASES);
+ if (n < 0)
+ dev_warn(dev,
+ "OF: no i2c-alias-pool, can't access remote I2C slaves");
+
+ ds90->atr_alias_num = n;
+
+ dev_dbg(dev, "i2c-alias-pool has %zu aliases", ds90->atr_alias_num);
+
+ return 0;
+}
+
+static int ds90_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct ds90_data *ds90;
+ unsigned int rev_mask;
+ int err;
+ int i;
+
+ ds90 = devm_kzalloc(&client->dev, sizeof(*ds90), GFP_KERNEL);
+ if (!ds90)
+ return -ENOMEM;
+
+ ds90->client = client;
+
+ err = ds90_parse_dt(ds90);
+ if (err)
+ goto err_parse_dt;
+
+ /* get reset pin from DT */
+ ds90->reset_gpio = devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(ds90->reset_gpio)) {
+ if (PTR_ERR(ds90->reset_gpio) != -EPROBE_DEFER)
+ dev_err(&client->dev, "Cannot get reset GPIO");
+ return PTR_ERR(ds90->reset_gpio);
+ }
+
+ mutex_init(&ds90->lock);
+
+ i2c_set_clientdata(client, ds90);
+
+ /* initialize regmap */
+ ds90->regmap = devm_regmap_init_i2c(client, &ds90_regmap_config);
+ if (IS_ERR(ds90->regmap)) {
+ err = PTR_ERR(ds90->regmap);
+ dev_err(&client->dev, "regmap init failed (%d)\n", err);
+ goto err_regmap;
+ }
+
+ /* Runtime check register accessibility */
+ ds90_reset(ds90, false);
+
+ err = ds90_read(ds90, DS90_REG_REV_MASK, &rev_mask);
+ if (err) {
+ dev_err(&client->dev,
+ "Cannot read first register (%d), abort\n", err);
+ goto err_reg_read;
+ }
+
+ /* Init rxports, remote GPIOs and I2C */
+
+ err = ds90_gpio_probe(ds90);
+ if (err) {
+ dev_err(&client->dev, "Error probing gpios (%d)\n", err);
+ goto err_configure_deser_gpios;
+ }
+
+ err = ds90_rxport_probe(ds90);
+ if (err)
+ goto err_rxport_probe;
+
+ /* V4L2 */
+
+ for (i = 0; i < DS90_V4L2_NUM_PADS; i++)
+ ds90_init_format(&ds90->fmt[i]);
+
+ v4l2_i2c_subdev_init(&ds90->sd, client, &ds90_subdev_ops);
+
+ /* Let both the I2C client and the subdev point to us */
+ i2c_set_clientdata(client, ds90); /* v4l2_i2c_subdev_init writes it */
+ v4l2_set_subdevdata(&ds90->sd, ds90);
+
+ ds90->sd.internal_ops = &ds90_subdev_internal_ops;
+ ds90->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+ /* TODO MEDIA_ENT_F_VID_IF_BRIDGE (since kernel 4.13) is better? */
+ ds90->sd.entity.function = MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER;
+
+ ds90->pads[0].flags = MEDIA_PAD_FL_SINK;
+ ds90->pads[1].flags = MEDIA_PAD_FL_SOURCE;
+ err = media_entity_pads_init(&ds90->sd.entity,
+ DS90_V4L2_NUM_PADS, ds90->pads);
+ if (err)
+ goto err_pads_init;
+
+ err = v4l2_async_register_subdev(&ds90->sd);
+ if (err) {
+ dev_err(&client->dev, "v4l2_async_register_subdev error %d\n", err);
+ goto err_register_subdev;
+ }
+
+ /* Kick off */
+
+ regmap_update_bits(ds90->regmap,
+ DS90_REG_INTERRUPT_CTL,
+ DS90_REG_INTERRUPT_CTL_INT_EN, ~0);
+
+ ds90->kthread = kthread_run(ds90_run, ds90, dev_name(&client->dev));
+ if (IS_ERR(ds90->kthread)) {
+ err = PTR_ERR(ds90->kthread);
+ dev_err(&client->dev, "Cannot create kthread (%d)\n", err);
+ goto err_kthread;
+ }
+
+ dev_info(&client->dev, "Successfully probed (rev/mask %02x)\n", rev_mask);
+
+ return 0;
+
+err_kthread:
+ v4l2_async_unregister_subdev(&ds90->sd);
+err_register_subdev:
+ media_entity_cleanup(&ds90->sd.entity);
+err_pads_init:
+ ds90_rxport_remove(ds90);
+err_rxport_probe:
+err_configure_deser_gpios:
+err_reg_read:
+ ds90_reset(ds90, true);
+err_regmap:
+ mutex_destroy(&ds90->lock);
+err_parse_dt:
+ return err;
+}
+
+static int ds90_remove(struct i2c_client *client)
+{
+ struct ds90_data *ds90 = i2c_get_clientdata(client);
+
+ dev_info(&client->dev, "Removing\n");
+
+ kthread_stop(ds90->kthread);
+ v4l2_async_unregister_subdev(&ds90->sd);
+ media_entity_cleanup(&ds90->sd.entity);
+ ds90_rxport_remove(ds90);
+ ds90_reset(ds90, true);
+ mutex_destroy(&ds90->lock);
+
+ return 0;
+}
+
+static const struct i2c_device_id ds90_id[] = {
+ { "ds90ub954-q1", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ds90_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id ds90_dt_ids[] = {
+ { .compatible = "ti,ds90ub954-q1", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, ds90_dt_ids);
+#endif
+
+static struct i2c_driver ds90ub954_driver = {
+ .probe = ds90_probe,
+ .remove = ds90_remove,
+ .id_table = ds90_id,
+ .driver = {
+ .name = "ds90ub954",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(ds90_dt_ids),
+ },
+};
+
+module_i2c_driver(ds90ub954_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Texas Instruments DS90UB954-Q1 CSI-2 dual deserializer driver");
+MODULE_AUTHOR("Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>");
--
2.17.1