Re: [PATCH v5 7/8] ARM: dts: Add stmpe-adc DT node to Toradex iMX6 modules

[Marcel Ziswiler]

On Fri, 2018-12-21 at 14:46 +0100, Philippe Schenker wrote:
> From: Philippe Schenker <philippe.schenker@xxxxxxxxxxx>
> 
> Add the stmpe-adc DT node as found on Toradex iMX6 modules
> 
> Signed-off-by: Philippe Schenker <philippe.schenker@xxxxxxxxxxx>

Acked-by: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>

> ---
> 
> Changes in v5: None
> Changes in v4:
>  - Moved T30 devicetree settings to separate commit
> 
> Changes in v3:
>  - None
> 
> Changes in v2:
>  - Put common ADC settings in mfd
> 
>  arch/arm/boot/dts/imx6qdl-apalis.dtsi  | 22 ++++++++++++++--------
>  arch/arm/boot/dts/imx6qdl-colibri.dtsi | 23 +++++++++++++++--------
>  2 files changed, 29 insertions(+), 16 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
> b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
> index 3dc99dd8dde1..8db476d8978d 100644
> --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
> @@ -331,11 +331,18 @@
>  		id = <0>;
>  		blocks = <0x5>;
>  		irq-trigger = <0x1>;
> +		/* 3.25 MHz ADC clock speed */
> +		st,adc-freq = <1>;
> +		/* 12-bit ADC */
> +		st,mod-12b = <1>;
> +		/* internal ADC reference */
> +		st,ref-sel = <0>;
> +		/* ADC converstion time: 80 clocks */
> +		st,sample-time = <4>;
> +		/* forbid to use ADC channels 3-0 (touch) */
>  
>  		stmpe_touchscreen {
>  			compatible = "st,stmpe-ts";
> -			/* 3.25 MHz ADC clock speed */
> -			st,adc-freq = <1>;
>  			/* 8 sample average control */
>  			st,ave-ctrl = <3>;
>  			/* 7 length fractional part in z */
> @@ -345,17 +352,16 @@
>  			 * current limit value
>  			 */
>  			st,i-drive = <1>;
> -			/* 12-bit ADC */
> -			st,mod-12b = <1>;
> -			/* internal ADC reference */
> -			st,ref-sel = <0>;
> -			/* ADC converstion time: 80 clocks */
> -			st,sample-time = <4>;
>  			/* 1 ms panel driver settling time */
>  			st,settling = <3>;
>  			/* 5 ms touch detect interrupt delay */
>  			st,touch-det-delay = <5>;
>  		};
> +
> +		stmpe_adc {
> +			compatible = "st,stmpe-adc";
> +			st,norequest-mask = <0x0F>;
> +		};
>  	};
>  };
>  
> diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
> b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
> index 87e15e7cb32b..2e303d79c7f8 100644
> --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
> @@ -262,11 +262,18 @@
>  		id = <0>;
>  		blocks = <0x5>;
>  		irq-trigger = <0x1>;
> +		/* 3.25 MHz ADC clock speed */
> +		st,adc-freq = <1>;
> +		/* 12-bit ADC */
> +		st,mod-12b = <1>;
> +		/* internal ADC reference */
> +		st,ref-sel = <0>;
> +		/* ADC converstion time: 80 clocks */
> +		st,sample-time = <4>;
> +		/* forbid to use ADC channels 3-0 (touch) */
>  
>  		stmpe_touchscreen {
>  			compatible = "st,stmpe-ts";
> -			/* 3.25 MHz ADC clock speed */
> -			st,adc-freq = <1>;
>  			/* 8 sample average control */
>  			st,ave-ctrl = <3>;
>  			/* 7 length fractional part in z */
> @@ -276,17 +283,17 @@
>  			 * current limit value
>  			 */
>  			st,i-drive = <1>;
> -			/* 12-bit ADC */
> -			st,mod-12b = <1>;
> -			/* internal ADC reference */
> -			st,ref-sel = <0>;
> -			/* ADC converstion time: 80 clocks */
> -			st,sample-time = <4>;
>  			/* 1 ms panel driver settling time */
>  			st,settling = <3>;
>  			/* 5 ms touch detect interrupt delay */
>  			st,touch-det-delay = <5>;
>  		};
> +
> +		stmpe_adc {
> +			compatible = "st,stmpe-adc";
> +			/* 3.25 MHz ADC clock speed */
> +			st,norequest-mask = <0x0F>;
> +		};
>  	};
>  };