Re: [PATCH 1/1] mfd: rk808: Prepare rk805 for poweroff

[Stefan Mavrodiev]

On 1/9/19 3:11 PM, Heiko StÃbner wrote:
> Am Mittwoch, 9. Januar 2019, 14:10:34 CET schrieb Stefan Mavrodiev:
> > On 1/9/19 3:07 PM, Heiko StÃbner wrote:
> > > Hi Stefan, Lee,
> > >
> > > Am Dienstag, 2. Oktober 2018, 09:38:29 CET schrieb Stefan Mavrodiev:
> > > > RK805 has SLEEP signal, which can put the device into SLEEP or OFF
> > > > mode. The default is SLEEP mode.
> > > >
> > > > However, when the kernel performs power-off (actually the ATF) the
> > > > device will not go fully off and this will result in higher power
> > > > consumption and inability to wake the device with RTC alarm.
> > > >
> > > > The solution is to enable pm_power_off_prepare function, which will
> > > > configure SLEEP pin for OFF function.
> > > >
> > > > Signed-off-by: Stefan Mavrodiev <stefan@xxxxxxxxxx>
> > > just found this while cleaning my inbox and this change looks
> > > significant and it seems hasn't been applied yet.
> > >
> > > I guess this is still relevant, right?
> > Yes, but I guess it's out-of-sync with the latest kernel.
> you could rebase and resend it :-)

I would like to test it first. I'll resend the patch in couple of days
(I hope so).

PS: The previous email was from different mail address. Sorry about that.

Stefan Mavrodiev

> > > > ---
> > > >
> > > >    drivers/mfd/rk808.c | 24 ++++++++++++++++++++++++
> > > >    1 file changed, 24 insertions(+)
> > > >
> > > > diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
> > > > index 216fbf6..50f3f78 100644
> > > > --- a/drivers/mfd/rk808.c
> > > > +++ b/drivers/mfd/rk808.c
> > > > @@ -387,6 +387,25 @@ static void rk805_device_shutdown(void)
> > > >
> > > >    		dev_err(&rk808_i2c_client->dev, "power off error!\n");
> > > >    
> > > >    }
> > > >
> > > > +static void rk805_device_shutdown_prepare(void)
> > > > +{
> > > > +	int ret;
> > > > +	struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
> > > > +
> > > > +	if (!rk808) {
> > > > +		dev_warn(&rk808_i2c_client->dev,
> > > > +			 "have no rk805, so do nothing here\n");
> > > > +
> > > > +		return;
> > > > +	}
> > > > +
> > > > +	ret = regmap_update_bits(rk808->regmap,
> > > > +				 RK805_GPIO_IO_POL_REG,
> > > > +				 SLP_SD_MSK, SHUTDOWN_FUN);
> > > > +	if (ret)
> > > > +		dev_err(&rk808_i2c_client->dev, "power off error!\n");
> > > > +}
> > > > +
> > > >
> > > >    static void rk808_device_shutdown(void)
> > > >    {
> > > >    
> > > >    	int ret;
> > > >
> > > > @@ -549,6 +568,10 @@ static int rk808_probe(struct i2c_client *client,
> > > >
> > > >    	if (pm_off && !pm_power_off) {
> > > >    	
> > > >    		rk808_i2c_client = client;
> > > >    		pm_power_off = pm_pwroff_fn;
> > > >
> > > > +	} else if (pm_off && !pm_power_off_prepare &&
> > > > +		   rk808->variant == RK805_ID) {
> > > > +		rk808_i2c_client = client;
> > > > +		pm_power_off_prepare = rk805_device_shutdown_prepare;
> > > >
> > > >    	}
> > > >    	
> > > >    	return 0;
> > > >
> > > > @@ -564,6 +587,7 @@ static int rk808_remove(struct i2c_client *client)
> > > >
> > > >    	regmap_del_irq_chip(client->irq, rk808->irq_data);
> > > >    	pm_power_off = NULL;
> > > >
> > > > +	pm_power_off_prepare = NULL;
> > > >
> > > >    	return 0;
> > > >    
> > > >    }