Re: [PATCH] ARM: irq: Add IRQ_SET_MASK_OK_DONE handling in migrate_one_irq()
From: Dietmar Eggemann
Date: Wed Jan 09 2019 - 10:48:06 EST
Hi Marc,
On 1/8/19 3:16 PM, Marc Zyngier wrote:
Hi Dietmar,
On 08/01/2019 13:58, Dietmar Eggemann wrote:
Arm TC2 (multi_v7_defconfig plus CONFIG_ARM_BIG_LITTLE_CPUFREQ=y and
CONFIG_ARM_VEXPRESS_SPC_CPUFREQ=y) fails hotplug stress tests.
This issue was tracked down to a missing copy of the new affinity
cpumask of the vexpress-spc interrupt into struct
irq_common_data.affinity when the interrupt is migrated in
migrate_one_irq().
Commit 0407daceedfe ("irqchip/gic: Return IRQ_SET_MASK_OK_DONE in the
set_affinity method") changed the return value of the irq_set_affinity()
function of the GIC from IRQ_SET_MASK_OK to IRQ_SET_MASK_OK_DONE.
In migrate_one_irq() if the current irq affinity mask and the cpu
online mask do not share any CPU, the affinity mask is set to the cpu
online mask. In this case (ret == true) and when the irq chip
function irq_set_affinity() returns successfully (IRQ_SET_MASK_OK),
struct irq_common_data.affinity should also be updated.
Add IRQ_SET_MASK_OK_DONE next to IRQ_SET_MASK_OK when checking that the
irq chip function irq_set_affinity() returns successfully.
Commit 2cb625478f8c ("genirq: Add IRQ_SET_MASK_OK_DONE to support
stacked irqchip") only added IRQ_SET_MASK_OK_DONE handling to
irq_do_set_affinity() in the irq core and not to the Arm32 irq code.
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@xxxxxxx>
---
The hotplug issue on Arm TC2 happens because the vexpress-spc interrupt
(irq=22) is affine to CPU0. This occurs since it is setup early when the
cpu_online_mask is still 0.
But the problem with the missing copy of the affinity mask should occur
with every interrupt which is forced to migrate.
With additional debug in irq_setup_affinity():
[0.000619] irq_setup_affinity(): irq=17 mask=0 cpu_online_mask=0 set=0-4
[0.007065] irq_setup_affinity(): irq=22 mask=0 cpu_online_mask=0 set=0-4
[3.372907] irq_setup_affinity(): irq=47 mask=0-4 cpu_online_mask=0-4
set=0-4
cat /proc/interrupts
CPU0 CPU1 CPU2 CPU3 CPU4
22: 316 0 0 0 0 GIC-0 127
Level vexpress-spc
cat /proc/irq/22/smp_affinity_list
0
[...]
On the arm64 side, we've solved the exact same issue by getting rid of
this code and using the generic implementation. See 217d453d473c5
("arm64: fix a migrating irq bug when hotplug cpu"), which uses
irq_migrate_all_off_this_cpu instead.
I'm not sure there is much value in not using the core code in this case.
Thanks for the hint! Much more elegant! I tried the following on TC2 and
it worked just fine. I'm not aware on any drawbacks of using the generic
irq migration for Arm32 as well.
-- >8 --
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 664e918e2624..26524b75970a 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1400,6 +1400,7 @@ config NR_CPUS
config HOTPLUG_CPU
bool "Support for hot-pluggable CPUs"
depends on SMP
+ select GENERIC_IRQ_MIGRATION
help
Say Y here to experiment with turning CPUs off and on. CPUs
can be controlled through /sys/devices/system/cpu.
diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h
index c883fcbe93b6..46d41140df27 100644
--- a/arch/arm/include/asm/irq.h
+++ b/arch/arm/include/asm/irq.h
@@ -25,7 +25,6 @@
#ifndef __ASSEMBLY__
struct irqaction;
struct pt_regs;
-extern void migrate_irqs(void);
extern void asm_do_IRQ(unsigned int, struct pt_regs *);
void handle_IRQ(unsigned int, struct pt_regs *);
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 9908dacf9229..844861368cd5 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -31,7 +31,6 @@
#include <linux/smp.h>
#include <linux/init.h>
#include <linux/seq_file.h>
-#include <linux/ratelimit.h>
#include <linux/errno.h>
#include <linux/list.h>
#include <linux/kallsyms.h>
@@ -109,64 +108,3 @@ int __init arch_probe_nr_irqs(void)
return nr_irqs;
}
#endif
-
-#ifdef CONFIG_HOTPLUG_CPU
-static bool migrate_one_irq(struct irq_desc *desc)
-{
- struct irq_data *d = irq_desc_get_irq_data(desc);
- const struct cpumask *affinity = irq_data_get_affinity_mask(d);
- struct irq_chip *c;
- bool ret = false;
-
- /*
- * If this is a per-CPU interrupt, or the affinity does not
- * include this CPU, then we have nothing to do.
- */
- if (irqd_is_per_cpu(d) || !cpumask_test_cpu(smp_processor_id(),
affinity))
- return false;
-
- if (cpumask_any_and(affinity, cpu_online_mask) >= nr_cpu_ids) {
- affinity = cpu_online_mask;
- ret = true;
- }
-
- c = irq_data_get_irq_chip(d);
- if (!c->irq_set_affinity)
- pr_debug("IRQ%u: unable to set affinity\n", d->irq);
- else if (c->irq_set_affinity(d, affinity, false) ==
IRQ_SET_MASK_OK && ret)
- cpumask_copy(irq_data_get_affinity_mask(d), affinity);
-
- return ret;
-}
-
-/*
- * The current CPU has been marked offline. Migrate IRQs off this CPU.
- * If the affinity settings do not allow other CPUs, force them onto any
- * available CPU.
- *
- * Note: we must iterate over all IRQs, whether they have an attached
- * action structure or not, as we need to get chained interrupts too.
- */
-void migrate_irqs(void)
-{
- unsigned int i;
- struct irq_desc *desc;
- unsigned long flags;
-
- local_irq_save(flags);
-
- for_each_irq_desc(i, desc) {
- bool affinity_broken;
-
- raw_spin_lock(&desc->lock);
- affinity_broken = migrate_one_irq(desc);
- raw_spin_unlock(&desc->lock);
-
- if (affinity_broken)
- pr_warn_ratelimited("IRQ%u no longer affine to
CPU%u\n",
- i, smp_processor_id());
- }
-
- local_irq_restore(flags);
-}
-#endif /* CONFIG_HOTPLUG_CPU */
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 3bf82232b1be..1d6f5ea522f4 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -254,7 +254,7 @@ int __cpu_disable(void)
/*
* OK - migrate IRQs away from this CPU
*/
- migrate_irqs();
+ irq_migrate_all_off_this_cpu();
/*
* Flush user cache and TLB mappings, and then remove this CPU