Re: [PATCH v3 1/4] drm/vc4: Wait for display list synchronization when completing commit

[Paul Kocialkowski]

Hi Daniel,

On Tue, 2019-01-08 at 19:21 +0100, Daniel Vetter wrote:
> On Tue, Jan 8, 2019 at 3:51 PM Paul Kocialkowski
> <paul.kocialkowski@xxxxxxxxxxx> wrote:
> > During an atomic commit, the HVS is configured with a display list
> > for the channel matching the associated CRTC. The Pixel Valve (CRTC)
> > and encoder are also configured for the new setup at that time.
> > While the Pixel Valve and encoder are reconfigured synchronously, the
> > HVS is only reconfigured after the display list address (DISPLIST) has
> > been updated to the current display list address (DISPLACTX), which is
> > the responsibility of the hardware.
> > 
> > The time frame during which the HVS is still running on its previous
> > configuration but the CRTC and encoder have been reconfigured already
> > can lead to a number of synchronization issues. They will eventually
> > cause errors reported on the FIFOs, such as underruns.
> > 
> > With underrun detection enabled (from Boris Brezillon's series), this
> > leads to unreliable underrun detection with random false positives.
> > 
> > To ensure a coherent state, wait for each enabled channel of the HVS
> > to synchronize its current display list address. This fixes the issue
> > of random underrun reporting on commits.
> > 
> > Signed-off-by: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxx>
> > ---
> >  drivers/gpu/drm/vc4/vc4_drv.h  |  1 +
> >  drivers/gpu/drm/vc4/vc4_hvs.c  | 17 +++++++++++++++++
> >  drivers/gpu/drm/vc4/vc4_kms.c  |  2 ++
> >  drivers/gpu/drm/vc4/vc4_regs.h |  2 ++
> >  4 files changed, 22 insertions(+)
> > 
> > diff --git a/drivers/gpu/drm/vc4/vc4_drv.h b/drivers/gpu/drm/vc4/vc4_drv.h
> > index c24b078f0593..955f157f5ad0 100644
> > --- a/drivers/gpu/drm/vc4/vc4_drv.h
> > +++ b/drivers/gpu/drm/vc4/vc4_drv.h
> > @@ -772,6 +772,7 @@ void vc4_irq_reset(struct drm_device *dev);
> >  extern struct platform_driver vc4_hvs_driver;
> >  void vc4_hvs_dump_state(struct drm_device *dev);
> >  int vc4_hvs_debugfs_regs(struct seq_file *m, void *unused);
> > +void vc4_hvs_sync_dlist(struct drm_device *dev);
> > 
> >  /* vc4_kms.c */
> >  int vc4_kms_load(struct drm_device *dev);
> > diff --git a/drivers/gpu/drm/vc4/vc4_hvs.c b/drivers/gpu/drm/vc4/vc4_hvs.c
> > index 5d8c749c9749..1ba60b8e0c2d 100644
> > --- a/drivers/gpu/drm/vc4/vc4_hvs.c
> > +++ b/drivers/gpu/drm/vc4/vc4_hvs.c
> > @@ -166,6 +166,23 @@ static int vc4_hvs_upload_linear_kernel(struct vc4_hvs *hvs,
> >         return 0;
> >  }
> > 
> > +void vc4_hvs_sync_dlist(struct drm_device *dev)
> > +{
> > +       struct vc4_dev *vc4 = to_vc4_dev(dev);
> > +       unsigned int i;
> > +       int ret;
> > +
> > +       for (i = 0; i < SCALER_CHANNELS_COUNT; i++) {
> > +               if (!(HVS_READ(SCALER_DISPCTRLX(i)) & SCALER_DISPCTRLX_ENABLE))
> > +                       continue;
> > +
> > +               ret = wait_for(HVS_READ(SCALER_DISPLACTX(i)) ==
> > +                              HVS_READ(SCALER_DISPLISTX(i)), 1000);
> > +               WARN(ret, "Timeout waiting for channel %d display list sync\n",
> > +                    i);
> > +       }
> > +}
> > +
> >  static int vc4_hvs_bind(struct device *dev, struct device *master, void *data)
> >  {
> >         struct platform_device *pdev = to_platform_device(dev);
> > diff --git a/drivers/gpu/drm/vc4/vc4_kms.c b/drivers/gpu/drm/vc4/vc4_kms.c
> > index 0490edb192a1..2d66a2b57a91 100644
> > --- a/drivers/gpu/drm/vc4/vc4_kms.c
> > +++ b/drivers/gpu/drm/vc4/vc4_kms.c
> > @@ -155,6 +155,8 @@ vc4_atomic_complete_commit(struct drm_atomic_state *state)
> > 
> >         drm_atomic_helper_commit_hw_done(state);
> > 
> > +       vc4_hvs_sync_dlist(dev);
> 
> From your description I'd have guessed you want this between when you
> update the planes and the crtc, so somewhere between commit_planes()
> and commit_modeset_enables(). At least I have no idea how waiting here
> can prevent underruns, by this point there's no further hw programming
> happening.

One thing that I did not mention is that the display list (that
configures the planes) is only set at crtc_enable time (and taken into
account by the hardware later).

However, even calling vc4_hvs_sync_dlist right at the end of
crtc_enable doesn't do either (the old display list just sticks). It
only seems to work after the HDMI encoder enable step and I don't know
any good reason why.

I didn't find any description of when that dlist sync mechanism is
supposed to take place and what particular event triggers it. Perhaps
it is triggered by a signal originating from the encoder? If anyone has
insight on the hardware, feel free to shed some light here :)

Cheers and thanks for the review,

Paul

> Only exception is if you have an IOMMU which can fault, in
> which case the cleanup_planes might remove the buffers prematurely.
> But if that's the problem, then your semantics of the flip_done event
> are wrong - when flip_done is signalled, the hw must have stopped
> scanning out the old planes, since userspace expects to be able to
> start overwriting/reusing them.
> -Daniel
> 
> > +
> >         drm_atomic_helper_wait_for_flip_done(dev, state);
> > 
> >         drm_atomic_helper_cleanup_planes(dev, state);
> > diff --git a/drivers/gpu/drm/vc4/vc4_regs.h b/drivers/gpu/drm/vc4/vc4_regs.h
> > index 931088014272..50c653309aec 100644
> > --- a/drivers/gpu/drm/vc4/vc4_regs.h
> > +++ b/drivers/gpu/drm/vc4/vc4_regs.h
> > @@ -212,6 +212,8 @@
> > 
> >  #define PV_HACT_ACT                            0x30
> > 
> > +#define SCALER_CHANNELS_COUNT                  3
> > +
> >  #define SCALER_DISPCTRL                         0x00000000
> >  /* Global register for clock gating the HVS */
> >  # define SCALER_DISPCTRL_ENABLE                        BIT(31)
> > --
> > 2.20.1
> > 
> 
> 
-- 
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com