Re: [PATCH v1 2/6] clk: qcom: Skip halt checks on gcc_usb3_phy_pipe_clk for 8998

[Stephen Boyd]

Quoting Jeffrey Hugo (2019-01-04 08:50:15)
> The gcc_usb3_phy_pipe_clk is generated by the phy, but is also used by
> the phy during init.  The clock needs to be enabled during the init
> sequence, but may not be fully active until after the init sequence is
> complete.  This causes a catch-22 if the clock status is checked during
> enable.  As a result, skip the checks to avoid the troubling situation.
> 
> Signed-off-by: Jeffrey Hugo <jhugo@xxxxxxxxxxxxxx>
> ---

Applied to clk-next