Re: [PATCH v2] net: ethernet: mediatek: fix warning in phy_start_aneg

[Sean Wang]

On Wed, Jan 9, 2019 at 10:31 AM Heiner Kallweit <hkallweit1@xxxxxxxxx> wrote:
>
> On 09.01.2019 08:20, Frank Wunderlich wrote:
> > From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
> >
> > linux 5.0-rc1 shows following warning on bpi-r2/mt7623 bootup:
> >
> > [ 5.170597] WARNING: CPU: 3 PID: 1 at drivers/net/phy/phy.c:548 phy_start_aneg+0x110/0x144
> > [ 5.178826] called from state READY
> > ....
> > [ 5.264111] [<c0629fd4>] (phy_start_aneg) from [<c0e3e720>] (mtk_init+0x414/0x47c)
> > [ 5.271630] r7:df5f5eec r6:c0f08c48 r5:00000000 r4:dea67800
> > [ 5.277256] [<c0e3e30c>] (mtk_init) from [<c07dabbc>] (register_netdevice+0x98/0x51c)
> > [ 5.285035] r8:00000000 r7:00000000 r6:c0f97080 r5:c0f08c48 r4:dea67800
> > [ 5.291693] [<c07dab24>] (register_netdevice) from [<c07db06c>] (register_netdev+0x2c/0x44)
> > [ 5.299989] r8:00000000 r7:dea2e608 r6:deacea00 r5:dea2e604 r4:dea67800
> > [ 5.306646] [<c07db040>] (register_netdev) from [<c06326d8>] (mtk_probe+0x668/0x7ac)
> > [ 5.314336] r5:dea2e604 r4:dea2e040
> > [ 5.317890] [<c0632070>] (mtk_probe) from [<c05a78fc>] (platform_drv_probe+0x58/0xa8)
> > [ 5.325670] r10:c0f86bac r9:00000000 r8:c0fbe578 r7:00000000 r6:c0f86bac r5:00000000
> > [ 5.333445] r4:deacea10
> > [ 5.335963] [<c05a78a4>] (platform_drv_probe) from [<c05a5248>] (really_probe+0x2d8/0x424)
> >
> > maybe other boards using this generic driver are affected
> >
> > v2:
> > optimization:
> >
> > - phy_set_max_speed() is only needed if you want to reduce the
> >   max speed, typically if the PHY supports 1Gbps but the MAC
> >   supports 100Mbps only.
> >
> > - The pause parameters are autonegotiated. Except you have a specific
> >   need you normally don't need to manually fiddle with this.
> >
> > - phy_start_aneg() is called implicitly by the phylib state machine,
> >   you shouldn't call it manually except you have a good excuse.
> >
> > - netif_carrier_on/netif_carrier_off in mtk_phy_link_adjust() isn't
> >   needed. It's done by phy_link_change() in phylib.
> >
> > Signed-off-by: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
> > ---
> >  drivers/net/ethernet/mediatek/mtk_eth_soc.c | 16 ----------------
> >  1 file changed, 16 deletions(-)
> >
> Reviewed-by: Heiner Kallweit <hkallweit1@xxxxxxxxx>

Thanks for your help to have the driver more fit in phylib.

Acked-by: Sean Wang <sean.wang@xxxxxxxxxx>