[PATCH v2 2/2] Mediatek staging: Use individual config flags in Makefile

[thirtythreeforty]

From: George Hilliard <thirtythreeforty@xxxxxxxxx>

These drivers are useful on other MT76xx SoCs, which have compatible
peripherals.  The drivers are selectable in Kconfig, but they were
quietly excluded from the build because the SOC_MT7621 chip was not
selected.  So, make the main staging Makefile use the same flags as
everything else for these drivers.

mt7621-dma and mt7621-dts are left alone because they truly do require
that SoC.

I have personally confirmed that the mt7621-spi driver works on the
MT7688, which was what prompted this change.

Cc: linux-kernel@xxxxxxxxxxxxxxx
Cc: devel@xxxxxxxxxxxxxxxxxxxx
Cc: NeilBrown <neil@xxxxxxxxxx>
Signed-off-by: George Hilliard <thirtythreeforty@xxxxxxxxx>
---
 drivers/staging/Makefile | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index e095f427177c..4b78ea2c7848 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -42,12 +42,12 @@ obj-$(CONFIG_BCM2835_VCHIQ)	+= vc04_services/
 obj-$(CONFIG_DRM_VBOXVIDEO)	+= vboxvideo/
 obj-$(CONFIG_PI433)		+= pi433/
 obj-$(CONFIG_SOC_MT7621)	+= mt7621-pci/
-obj-$(CONFIG_SOC_MT7621)	+= mt7621-pinctrl/
-obj-$(CONFIG_SOC_MT7621)	+= mt7621-spi/
+obj-$(CONFIG_PINCTRL_RT2880)	+= mt7621-pinctrl/
+obj-$(CONFIG_SPI_MT7621)	+= mt7621-spi/
 obj-$(CONFIG_SOC_MT7621)	+= mt7621-dma/
-obj-$(CONFIG_SOC_MT7621)	+= ralink-gdma/
-obj-$(CONFIG_SOC_MT7621)	+= mt7621-mmc/
-obj-$(CONFIG_SOC_MT7621)	+= mt7621-eth/
+obj-$(CONFIG_DMA_RALINK)	+= ralink-gdma/
+obj-$(CONFIG_MTK_MMC)		+= mt7621-mmc/
+obj-$(CONFIG_NET_MEDIATEK_SOC_STAGING)	+= mt7621-eth/
 obj-$(CONFIG_SOC_MT7621)	+= mt7621-dts/
 obj-$(CONFIG_STAGING_GASKET_FRAMEWORK)	+= gasket/
 obj-$(CONFIG_XIL_AXIS_FIFO)	+= axis-fifo/
-- 
2.20.1